hrcon: Add support for the DH variant
hrcon DH(dual head) has two video outputs per FPGA.
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h
index 696af0a..16d5885 100644
--- a/include/configs/hrcon.h
+++ b/include/configs/hrcon.h
@@ -20,7 +20,11 @@
#define CONFIG_SYS_TEXT_BASE 0xFE000000
+#ifdef CONFIG_HRCON_DH
+#define CONFIG_IDENT_STRING " hrcon dh 0.01"
+#else
#define CONFIG_IDENT_STRING " hrcon 0.01"
+#endif
#define CONFIG_BOARD_EARLY_INIT_F
@@ -343,6 +347,22 @@
#define CONFIG_SYS_I2C_IHS_SPEED_3 50000
#define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F
+#ifdef CONFIG_HRCON_DH
+#define CONFIG_SYS_I2C_IHS_DUAL
+#define CONFIG_SYS_I2C_IHS_CH0_1
+#define CONFIG_SYS_I2C_IHS_SPEED_0_1 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_0_1 0x7F
+#define CONFIG_SYS_I2C_IHS_CH1_1
+#define CONFIG_SYS_I2C_IHS_SPEED_1_1 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_1_1 0x7F
+#define CONFIG_SYS_I2C_IHS_CH2_1
+#define CONFIG_SYS_I2C_IHS_SPEED_2_1 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_2_1 0x7F
+#define CONFIG_SYS_I2C_IHS_CH3_1
+#define CONFIG_SYS_I2C_IHS_SPEED_3_1 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_3_1 0x7F
+#endif
+
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -359,16 +379,48 @@
#define CONFIG_SYS_I2C_SOFT_SPEED_4 50000
#define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F
+#ifdef CONFIG_HRCON_DH
+#define I2C_SOFT_DECLARATIONS5
+#define CONFIG_SYS_I2C_SOFT_SPEED_5 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE_5 0x7F
+#define I2C_SOFT_DECLARATIONS6
+#define CONFIG_SYS_I2C_SOFT_SPEED_6 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE_6 0x7F
+#define I2C_SOFT_DECLARATIONS7
+#define CONFIG_SYS_I2C_SOFT_SPEED_7 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE_7 0x7F
+#define I2C_SOFT_DECLARATIONS8
+#define CONFIG_SYS_I2C_SOFT_SPEED_8 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE_8 0x7F
+#endif
+
+#ifdef CONFIG_HRCON_DH
+#define CONFIG_SYS_ICS8N3QV01_I2C {9, 10, 11, 12, 13, 14, 15, 16}
+#define CONFIG_SYS_DP501_I2C {1, 3, 5, 7, 2, 4, 6, 8}
+#else
#define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8}
#define CONFIG_SYS_DP501_I2C {1, 2, 3, 4}
+#endif
#ifndef __ASSEMBLY__
void fpga_gpio_set(unsigned int bus, int pin);
void fpga_gpio_clear(unsigned int bus, int pin);
int fpga_gpio_get(unsigned int bus, int pin);
+void fpga_control_set(unsigned int bus, int pin);
+void fpga_control_clear(unsigned int bus, int pin);
#endif
+#ifdef CONFIG_HRCON_DH
+#define I2C_ACTIVE \
+ do { \
+ if (I2C_ADAP_HWNR > 3) \
+ fpga_control_set(I2C_ADAP_HWNR, 0x0004); \
+ else \
+ fpga_control_clear(I2C_ADAP_HWNR, 0x0004); \
+ } while (0)
+#else
#define I2C_ACTIVE { }
+#endif
#define I2C_TRISTATE { }
#define I2C_READ \
(fpga_gpio_get(I2C_ADAP_HWNR, 0x0040) ? 1 : 0)
@@ -401,6 +453,10 @@
#define CONFIG_SYS_DP501_DIFFERENTIAL
#define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */
+#ifdef CONFIG_HRCON_DH
+#define CONFIG_SYS_OSD_DH
+#endif
+
/*
* General PCI
* Addresses are mapped 1-1.