rockchip: rk3036: add board_debug_uart_init()
Use board_debug_uart_init() for UART iomux init instead of
do it in board_init_f, and move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[Fixed whitespace error:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
diff --git a/arch/arm/mach-rockchip/rk3036-board-spl.c b/arch/arm/mach-rockchip/rk3036-board-spl.c
index b897ffe..110d06d 100644
--- a/arch/arm/mach-rockchip/rk3036-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3036-board-spl.c
@@ -7,30 +7,12 @@
#include <debug_uart.h>
#include <asm/io.h>
#include <asm/arch-rockchip/bootrom.h>
-#include <asm/arch-rockchip/grf_rk3036.h>
-#include <asm/arch-rockchip/hardware.h>
#include <asm/arch-rockchip/sdram_rk3036.h>
#include <asm/arch-rockchip/timer.h>
-#include <asm/arch-rockchip/uart.h>
-
-#define GRF_BASE 0x20008000
-
-#define DEBUG_UART_BASE 0x20068000
void board_init_f(ulong dummy)
{
-#ifdef EARLY_DEBUG
- struct rk3036_grf * const grf = (void *)GRF_BASE;
- /*
- * NOTE: sd card and debug uart use same iomux in rk3036,
- * so if you enable uart,
- * you can not boot from sdcard
- */
- rk_clrsetreg(&grf->gpio1c_iomux,
- GPIO1C3_MASK << GPIO1C3_SHIFT |
- GPIO1C2_MASK << GPIO1C2_SHIFT,
- GPIO1C3_UART2_SOUT << GPIO1C3_SHIFT |
- GPIO1C2_UART2_SIN << GPIO1C2_SHIFT);
+#ifdef CONFIG_DEBUG_UART
debug_uart_init();
#endif
rockchip_timer_init();