i2c: correct I2C deblock logic
Current code use dm_gpio_get_value() to get SDA and SCL value, and the
value depends on whether DTS file config the GPIO_ACTIVE_LOW. In ususal
case for i2c GPIO, DTS need to set GPIO_ACTIVE_LOW for SCL/SDA pins. So
here the logic is not correct.
And we must not use GPIOD_ACTIVE_LOW in client code include the
dm_gpio_set_dir_flags(), it is DTS's responsibility for this flag. So
remove GPIOD_ACTIVE_LOW here.
Fixes: aa54192d4a87 ("dm: i2c: implement gpio-based I2C deblock")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Alexander Kochetkov <al.kochet@gmail.com <mailto:al.kochet@gmail.com>>
diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c
index 8d9a89e..8867a56 100644
--- a/drivers/i2c/i2c-uclass.c
+++ b/drivers/i2c/i2c-uclass.c
@@ -508,13 +508,13 @@
dm_gpio_set_dir_flags(pin, GPIOD_IS_IN);
else
dm_gpio_set_dir_flags(pin, GPIOD_IS_OUT |
- GPIOD_ACTIVE_LOW |
GPIOD_IS_OUT_ACTIVE);
}
static int i2c_gpio_get_pin(struct gpio_desc *pin)
{
- return dm_gpio_get_value(pin);
+ /* DTS need config GPIO_ACTIVE_LOW */
+ return !dm_gpio_get_value(pin);
}
int i2c_deblock_gpio_loop(struct gpio_desc *sda_pin,