blk: Rename HAVE_BLOCK_DEVICE
This option is fact really related to SPL. For U-Boot proper we always use
driver model for block devices, so CONFIG_BLK is enabled if block devices
are in use.
It is only for SPL that we have two cases:
- SPL_BLK is enabled, in which case we use driver model and blk-uclass.c
- SPL_BLK is not enabled, in which case (if we need block devices) we must
use blk_legacy.c
Rename the symbol to SPL_LEGACY_BLOCK to make this clear. This is
different enough from BLK and SPL_BLK that there should be no confusion.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 70d9781..222472a 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -792,7 +792,7 @@
config SPL_MMC
bool "Support MMC"
depends on MMC
- select HAVE_BLOCK_DEVICE
+ select SPL_LEGACY_BLOCK
help
Enable support for MMC (Multimedia Card) within SPL. This enables
the MMC protocol implementation and allows any enabled drivers to
@@ -1318,7 +1318,7 @@
config SPL_USB_HOST
bool "Support USB host drivers"
- select HAVE_BLOCK_DEVICE
+ select SPL_LEGACY_BLOCK
help
Enable access to USB (Universal Serial Bus) host devices so that
SPL can load U-Boot from a connected USB peripheral, such as a USB
diff --git a/configs/axm_defconfig b/configs/axm_defconfig
index dc262c9..293052b 100644
--- a/configs/axm_defconfig
+++ b/configs/axm_defconfig
@@ -80,7 +80,7 @@
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SPL_DM=y
CONFIG_BLK=y
-CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_SPL_LEGACY_BLOCK=y
CONFIG_CLK=y
CONFIG_CLK_AT91=y
CONFIG_AT91_GPIO=y
diff --git a/configs/bcm968380gerg_ram_defconfig b/configs/bcm968380gerg_ram_defconfig
index a092468..55d7426 100644
--- a/configs/bcm968380gerg_ram_defconfig
+++ b/configs/bcm968380gerg_ram_defconfig
@@ -42,7 +42,7 @@
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
# CONFIG_NET is not set
# CONFIG_DM_DEVICE_REMOVE is not set
-CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_SPL_LEGACY_BLOCK=y
CONFIG_BCM6345_GPIO=y
CONFIG_LED=y
CONFIG_LED_BCM6328=y
diff --git a/configs/gardena-smart-gateway-mt7688_defconfig b/configs/gardena-smart-gateway-mt7688_defconfig
index b9ee281..fdfab14 100644
--- a/configs/gardena-smart-gateway-mt7688_defconfig
+++ b/configs/gardena-smart-gateway-mt7688_defconfig
@@ -78,7 +78,7 @@
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
# CONFIG_DM_DEVICE_REMOVE is not set
-CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_SPL_LEGACY_BLOCK=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_LED=y
CONFIG_LED_BLINK=y
diff --git a/configs/nsim_hs38_defconfig b/configs/nsim_hs38_defconfig
index 8e5e8ea..22690e7 100644
--- a/configs/nsim_hs38_defconfig
+++ b/configs/nsim_hs38_defconfig
@@ -30,7 +30,8 @@
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_BLK=y
-CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_SPL_LEGACY_BLOCK=y
+CONFIG_DM_ETH=y
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig
index 172ac18..4ef0157 100644
--- a/configs/qemu-ppce500_defconfig
+++ b/configs/qemu-ppce500_defconfig
@@ -40,7 +40,7 @@
CONFIG_DM=y
CONFIG_SIMPLE_BUS_CORRECT_RANGE=y
CONFIG_BLK=y
-CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_SPL_LEGACY_BLOCK=y
CONFIG_LBA48=y
CONFIG_CHIP_SELECTS_PER_CTRL=0
CONFIG_MPC8XXX_GPIO=y
diff --git a/disk/Makefile b/disk/Makefile
index 458e21e..45588cf 100644
--- a/disk/Makefile
+++ b/disk/Makefile
@@ -10,8 +10,8 @@
obj-$(CONFIG_$(SPL_TPL_)PARTITIONS) += disk-uclass.o
endif
-# Must have BLK or HAVE_BLOCK_DEVICE to support partitions
-ifneq ($(CONFIG_$(SPL_TPL_)BLK),$(CONFIG_HAVE_BLOCK_DEVICE),)
+# Must have BLK or SPL_LEGACY_BLOCK to support partitions
+ifneq ($(CONFIG_$(SPL_TPL_)BLK),$(CONFIG_SPL_LEGACY_BLOCK),)
obj-$(CONFIG_$(SPL_TPL_)MAC_PARTITION) += part_mac.o
obj-$(CONFIG_$(SPL_TPL_)DOS_PARTITION) += part_dos.o
obj-$(CONFIG_$(SPL_TPL_)ISO_PARTITION) += part_iso.o
diff --git a/disk/disk-uclass.c b/disk/disk-uclass.c
index f3fb942..9351a5c 100644
--- a/disk/disk-uclass.c
+++ b/disk/disk-uclass.c
@@ -27,8 +27,7 @@
struct udevice *dev;
int ret;
- if (!CONFIG_IS_ENABLED(PARTITIONS) ||
- !CONFIG_IS_ENABLED(HAVE_BLOCK_DEVICE))
+ if (!CONFIG_IS_ENABLED(PARTITIONS) || !blk_enabled())
return 0;
if (device_get_uclass_id(blk_dev) != UCLASS_BLK)
diff --git a/doc/develop/driver-model/migration.rst b/doc/develop/driver-model/migration.rst
index 5a60436..742fea5 100644
--- a/doc/develop/driver-model/migration.rst
+++ b/doc/develop/driver-model/migration.rst
@@ -57,7 +57,7 @@
appropriate DM driver, CONFIG_BLK needs to be set as well. The final deadline
here coincides with the final deadline for migration of the various block
subsystems. At this point we will be able to audit and correct the logic in
-Kconfig around using CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE and make
+Kconfig around using CONFIG_PARTITIONS and CONFIG_SPL_LEGACY_BLOCK and make
use of CONFIG_BLK / CONFIG_SPL_BLK as needed.
CONFIG_DM_SPI / CONFIG_DM_SPI_FLASH
diff --git a/drivers/Makefile b/drivers/Makefile
index f2154e1..9d9f69a 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -59,7 +59,7 @@
obj-$(CONFIG_SPL_USB_HOST) += usb/host/
obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
obj-$(CONFIG_SPL_SATA) += ata/ scsi/
-obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
+obj-$(CONFIG_SPL_LEGACY_BLOCK) += block/
obj-$(CONFIG_SPL_BLK) += block/
obj-$(CONFIG_SPL_THERMAL) += thermal/
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 70e6bd3..c3f2ac0 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -9,7 +9,7 @@
config SATA
bool "Support SATA controllers"
- select HAVE_BLOCK_DEVICE
+ select SPL_LEGACY_BLOCK
help
This enables support for SATA (Serial Advanced Technology
Attachment), a serial bus standard for connecting to hard drives and
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index df242df..5a0c434 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -11,7 +11,7 @@
be partitioned into several areas, called 'partitions' in U-Boot.
A filesystem can be placed in each partition.
-config HAVE_BLOCK_DEVICE
+config SPL_LEGACY_BLOCK
bool "Enable Legacy Block Device"
help
Some devices require block support whether or not DM is enabled
@@ -109,7 +109,7 @@
config IDE
bool "Support IDE controllers"
- select HAVE_BLOCK_DEVICE
+ select SPL_LEGACY_BLOCK
help
Enables support for IDE (Integrated Drive Electronics) hard drives.
This allows access to raw blocks and filesystems on an IDE drive
@@ -222,7 +222,7 @@
config LBA48
bool "Enable LBA support for disks larger than 137GB"
- depends on HAVE_BLOCK_DEVICE
+ depends on SPL_LEGACY_BLOCK
help
Set this to enable support for disks larger than 137GB.
Also look at CONFIG_SYS_64BIT_LBA. Without both of these, LBA48
@@ -231,7 +231,7 @@
config SYS_64BIT_LBA
bool "Enable 64bit number of blocks on a block device"
- depends on HAVE_BLOCK_DEVICE
+ depends on SPL_LEGACY_BLOCK
help
Make the block subsystem use 64bit sector addresses, rather than the
default of 32bit.
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index b221a7c..f48d3e1 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -6,7 +6,7 @@
obj-$(CONFIG_$(SPL_)BLK) += blk-uclass.o
ifndef CONFIG_$(SPL_)BLK
-obj-$(CONFIG_HAVE_BLOCK_DEVICE) += blk_legacy.o
+obj-$(CONFIG_SPL_LEGACY_BLOCK) += blk_legacy.o
endif
ifndef CONFIG_SPL_BUILD
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 0dcec8a..5cd2975 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -3,7 +3,7 @@
config MMC
bool "MMC/SD/SDIO card support"
default ARM || PPC || SANDBOX
- select HAVE_BLOCK_DEVICE
+ select SPL_LEGACY_BLOCK
select DM_MMC if DM
help
This selects MultiMediaCard, Secure Digital and Secure
diff --git a/drivers/nvme/Kconfig b/drivers/nvme/Kconfig
index 2a103ab..7b6d546 100644
--- a/drivers/nvme/Kconfig
+++ b/drivers/nvme/Kconfig
@@ -4,7 +4,7 @@
config NVME
bool "NVM Express device support"
- select HAVE_BLOCK_DEVICE
+ select SPL_LEGACY_BLOCK
help
This option enables support for NVM Express devices.
It supports basic functions of NVMe (read/write).
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 19872fb..4d64381 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1,6 +1,6 @@
config SCSI
bool "Support SCSI controllers"
- select HAVE_BLOCK_DEVICE
+ select SPL_LEGACY_BLOCK
help
This enables support for SCSI (Small Computer System Interface),
a parallel interface widely used with storage peripherals such as
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 6ad2a93..20db2c5 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -2,7 +2,7 @@
bool "Xen para-virtualized block device"
depends on DM
select BLK
- select HAVE_BLOCK_DEVICE
+ select SPL_LEGACY_BLOCK
help
This driver implements the front-end of the Xen virtual
block device driver. It communicates with a back-end driver
diff --git a/include/blk.h b/include/blk.h
index 332481a..5bdffe7 100644
--- a/include/blk.h
+++ b/include/blk.h
@@ -23,7 +23,7 @@
static inline bool blk_enabled(void)
{
- return CONFIG_IS_ENABLED(BLK) || IS_ENABLED(CONFIG_HAVE_BLOCK_DEVICE);
+ return CONFIG_IS_ENABLED(BLK) || IS_ENABLED(CONFIG_SPL_LEGACY_BLOCK);
}
/* Interface types: */
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index 5cfff8c..c4e8125 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -20,7 +20,7 @@
select EVENT_DYNAMIC
select LIB_UUID
imply PARTITION_UUIDS
- select HAVE_BLOCK_DEVICE
+ select SPL_LEGACY_BLOCK
select REGEX
imply FAT
imply FAT_WRITE