video: Drop unused console functions
CONFIG_CONSOLE_CURSOR, CONFIG_SYS_CONSOLE_BLINK_COUNT and
CONFIG_CONSOLE_TIME are not used by any board. The implementation is not
great and stands in the way of a refactor of i8042. Drop these for now.
They can be re-introduced quite easily later, perhaps with driver-model
real-time-clock (RTC) support.
When reintroducing, it might be useful to make a few changes:
- Blink time would be more useful than blink count
- The confusing #ifdefs should be avoided
- The time functions should support driver model
- It would be best keyed off console_tstc() or some similar idle loop
rather than a particular input driver (i8042 in this case)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/README b/README
index e9b3a29..a0b6c89 100644
--- a/README
+++ b/README
@@ -872,13 +872,6 @@
(i.e. i8042_tstc)
VIDEO_GETC_FCT get char fct
(i.e. i8042_getc)
- CONFIG_CONSOLE_CURSOR cursor drawing on/off
- (requires blink timer
- cf. i8042.c)
- CONFIG_SYS_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c)
- CONFIG_CONSOLE_TIME display time/date info in
- upper right corner
- (requires CONFIG_CMD_DATE)
CONFIG_VIDEO_LOGO display Linux logo in
upper left corner
CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of
diff --git a/drivers/input/i8042.c b/drivers/input/i8042.c
index 9b5fa32..7b95b21 100644
--- a/drivers/input/i8042.c
+++ b/drivers/input/i8042.c
@@ -17,12 +17,6 @@
#define in8(p) inb(p)
#define out8(p, v) outb(v, p)
-#ifdef CONFIG_CONSOLE_CURSOR
-extern void console_cursor(int state);
-static int blink_count = CONFIG_SYS_CONSOLE_BLINK_COUNT;
-static int cursor_state;
-#endif
-
/* locals */
static int kbd_input = -1; /* no input yet */
@@ -598,15 +592,6 @@
{
unsigned char scan_code = 0;
-#ifdef CONFIG_CONSOLE_CURSOR
- if (--blink_count == 0) {
- cursor_state ^= 1;
- console_cursor(cursor_state);
- blink_count = CONFIG_SYS_CONSOLE_BLINK_COUNT;
- udelay(10);
- }
-#endif
-
if ((in8(I8042_STS_REG) & STATUS_OBF) == 0) {
return 0;
} else {
@@ -635,14 +620,6 @@
while (kbd_input == -1) {
while ((in8(I8042_STS_REG) & STATUS_OBF) == 0) {
-#ifdef CONFIG_CONSOLE_CURSOR
- if (--blink_count == 0) {
- cursor_state ^= 1;
- console_cursor(cursor_state);
- blink_count = CONFIG_SYS_CONSOLE_BLINK_COUNT;
- }
- udelay(10);
-#endif
}
scan_code = in8(I8042_DATA_REG);
if (scan_code != 0xfa)
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 556a55f..f191392 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -43,13 +43,6 @@
* VIDEO_TSTC_FCT - keyboard_tstc function
* VIDEO_GETC_FCT - keyboard_getc function
*
- * CONFIG_CONSOLE_CURSOR - on/off drawing cursor is done with
- * delay loop in VIDEO_TSTC_FCT (i8042)
- *
- * CONFIG_SYS_CONSOLE_BLINK_COUNT - value for delay loop - blink rate
- * CONFIG_CONSOLE_TIME - display time/date in upper right
- * corner, needs CONFIG_CMD_DATE and
- * CONFIG_CONSOLE_CURSOR
* CONFIG_VIDEO_LOGO - display Linux Logo in upper left corner.
* Use CONFIG_SPLASH_SCREEN_ALIGN with
* environment variable "splashpos" to place
@@ -198,9 +191,6 @@
/*
* Cursor definition:
- * CONFIG_CONSOLE_CURSOR: Uses a timer function (see drivers/input/i8042.c)
- * to let the cursor blink. Uses the macros
- * CURSOR_OFF and CURSOR_ON.
* CONFIG_VIDEO_SW_CURSOR: Draws a cursor after the last character. No
* blinking is provided. Uses the macros CURSOR_SET
* and CURSOR_OFF.
@@ -210,42 +200,29 @@
* must disable the hardware register of the graphic
* chip. Otherwise a blinking field is displayed
*/
-#if !defined(CONFIG_CONSOLE_CURSOR) && \
- !defined(CONFIG_VIDEO_SW_CURSOR) && \
- !defined(CONFIG_VIDEO_HW_CURSOR)
+#if !defined(CONFIG_VIDEO_SW_CURSOR) && !defined(CONFIG_VIDEO_HW_CURSOR)
/* no Cursor defined */
#define CURSOR_ON
#define CURSOR_OFF
#define CURSOR_SET
#endif
-#if defined(CONFIG_CONSOLE_CURSOR) || defined(CONFIG_VIDEO_SW_CURSOR)
-#if defined(CURSOR_ON) || \
- (defined(CONFIG_CONSOLE_CURSOR) && defined(CONFIG_VIDEO_SW_CURSOR))
-#error only one of CONFIG_CONSOLE_CURSOR, CONFIG_VIDEO_SW_CURSOR, \
- or CONFIG_VIDEO_HW_CURSOR can be defined
+#if defined(CONFIG_VIDEO_SW_CURSOR)
+#if defined(CONFIG_VIDEO_HW_CURSOR)
+#error only one of CONFIG_VIDEO_SW_CURSOR or CONFIG_VIDEO_HW_CURSOR can be \
+ defined
#endif
void console_cursor(int state);
#define CURSOR_ON console_cursor(1)
#define CURSOR_OFF console_cursor(0)
#define CURSOR_SET video_set_cursor()
-#endif /* CONFIG_CONSOLE_CURSOR || CONFIG_VIDEO_SW_CURSOR */
-
-#ifdef CONFIG_CONSOLE_CURSOR
-#ifndef CONFIG_CONSOLE_TIME
-#error CONFIG_CONSOLE_CURSOR must be defined for CONFIG_CONSOLE_TIME
-#endif
-#ifndef CONFIG_I8042_KBD
-#warning Cursor drawing on/off needs timer function s.a. drivers/input/i8042.c
-#endif
-#endif /* CONFIG_CONSOLE_CURSOR */
-
+#endif /* CONFIG_VIDEO_SW_CURSOR */
#ifdef CONFIG_VIDEO_HW_CURSOR
#ifdef CURSOR_ON
-#error only one of CONFIG_CONSOLE_CURSOR, CONFIG_VIDEO_SW_CURSOR, \
- or CONFIG_VIDEO_HW_CURSOR can be defined
+#error only one of CONFIG_VIDEO_SW_CURSOR or CONFIG_VIDEO_HW_CURSOR can be \
+ defined
#endif
#define CURSOR_ON
#define CURSOR_OFF
@@ -626,7 +603,7 @@
video_drawchars(xx, yy + video_logo_height, &c, 1);
}
-#if defined(CONFIG_CONSOLE_CURSOR) || defined(CONFIG_VIDEO_SW_CURSOR)
+#if defined(CONFIG_VIDEO_SW_CURSOR)
static void video_set_cursor(void)
{
if (cursor_state)
@@ -651,27 +628,6 @@
void console_cursor(int state)
{
-#ifdef CONFIG_CONSOLE_TIME
- struct rtc_time tm;
- char info[16];
-
- /* time update only if cursor is on (faster scroll) */
- if (state) {
- rtc_get(&tm);
-
- sprintf(info, " %02d:%02d:%02d ", tm.tm_hour, tm.tm_min,
- tm.tm_sec);
- video_drawstring(VIDEO_VISIBLE_COLS - 10 * VIDEO_FONT_WIDTH,
- VIDEO_INFO_Y, (uchar *) info);
-
- sprintf(info, "%02d.%02d.%04d", tm.tm_mday, tm.tm_mon,
- tm.tm_year);
- video_drawstring(VIDEO_VISIBLE_COLS - 10 * VIDEO_FONT_WIDTH,
- VIDEO_INFO_Y + 1 * VIDEO_FONT_HEIGHT,
- (uchar *) info);
- }
-#endif
-
if (cursor_state != state) {
if (cursor_state) {
/* turn off the cursor */
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 29c27fa..f582f55 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -532,7 +532,6 @@
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_ATI_RADEON_FB
#define CONFIG_VIDEO_LOGO
-/*#define CONFIG_CONSOLE_CURSOR*/
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT
#endif
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 166fcda..6ec072c 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -297,7 +297,6 @@
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_ATI_RADEON_FB
#define CONFIG_VIDEO_LOGO
-/*#define CONFIG_CONSOLE_CURSOR*/
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
#endif
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 19da477..9b131a2 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -495,7 +495,6 @@
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_ATI_RADEON_FB
#define CONFIG_VIDEO_LOGO
-/*#define CONFIG_CONSOLE_CURSOR*/
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
#endif
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 6f1535e..a5dad2d 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -403,7 +403,6 @@
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_ATI_RADEON_FB
#define CONFIG_VIDEO_LOGO
-/*#define CONFIG_CONSOLE_CURSOR*/
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE2_IO_VIRT
#endif