board: ti: am64x: Account for DDR size fixups if ECC is enabled
Call into k3-ddrss driver to fixup device tree and resize the available
amount of DDR if ECC is enabled.
A second fixup is required from A53 SPL to take the fixup as done from
R5 SPL and apply it to DT passed to A53 U-boot, which in turn passes
this to the OS.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
diff --git a/board/ti/am64x/evm.c b/board/ti/am64x/evm.c
index 7ea80b8..c88139a 100644
--- a/board/ti/am64x/evm.c
+++ b/board/ti/am64x/evm.c
@@ -2,13 +2,15 @@
/*
* Board specific initialization for AM642 EVM
*
- * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
* Keerthy <j-keerthy@ti.com>
*
*/
#include <common.h>
#include <asm/io.h>
+#include <dm/uclass.h>
+#include <k3-ddrss.h>
#include <spl.h>
#include <fdt_support.h>
#include <asm/arch/hardware.h>
@@ -66,7 +68,8 @@
}
#endif
-#if defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(USB_STORAGE)
+#if defined(CONFIG_SPL_BUILD)
+#if CONFIG_IS_ENABLED(USB_STORAGE)
static int fixup_usb_boot(const void *fdt_blob)
{
int ret = 0;
@@ -90,10 +93,58 @@
return ret;
}
+#endif
+
+#if defined(CONFIG_K3_AM64_DDRSS)
+static void fixup_ddr_driver_for_ecc(struct spl_image_info *spl_image)
+{
+ struct udevice *dev;
+ int ret;
+
+ dram_init_banksize();
+
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret)
+ panic("Cannot get RAM device for ddr size fixup: %d\n", ret);
+
+ ret = k3_ddrss_ddr_fdt_fixup(dev, spl_image->fdt_addr, gd->bd);
+ if (ret)
+ printf("Error fixing up ddr node for ECC use! %d\n", ret);
+}
+#else
+static void fixup_memory_node(struct spl_image_info *spl_image)
+{
+ u64 start[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
+ int bank;
+ int ret;
+
+ dram_init();
+ dram_init_banksize();
+
+ for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+ start[bank] = gd->bd->bi_dram[bank].start;
+ size[bank] = gd->bd->bi_dram[bank].size;
+ }
+
+ /* dram_init functions use SPL fdt, and we must fixup u-boot fdt */
+ ret = fdt_fixup_memory_banks(spl_image->fdt_addr, start, size, CONFIG_NR_DRAM_BANKS);
+ if (ret)
+ printf("Error fixing up memory node! %d\n", ret);
+}
+#endif
void spl_perform_fixups(struct spl_image_info *spl_image)
{
+#if defined(CONFIG_K3_AM64_DDRSS)
+ fixup_ddr_driver_for_ecc(spl_image);
+#else
+ fixup_memory_node(spl_image);
+#endif
+
+#if CONFIG_IS_ENABLED(USB_STORAGE)
fixup_usb_boot(spl_image->fdt_addr);
+#endif
}
#endif