sunxi: Sync dts files with the upstream kernel
Sync dts files with the upstream kernel including
changes queued for 4.6:
https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?h=sunxi/dt-for-4.6
Note this adds a number of new unused board dts files. I've asked the
authors of the kernel commits adding these to submit a matching defconfig
to u-boot.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
diff --git a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
index 8446465..bba4f9c 100644
--- a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
@@ -59,6 +59,159 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ gpio_keys {
+ compatible = "gpio-keys-polled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_inet9f>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ button@0 {
+ label = "Left Joystick Left";
+ linux,code = <ABS_X>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
+ };
+
+ button@1 {
+ label = "Left Joystick Right";
+ linux,code = <ABS_X>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
+ };
+
+ button@2 {
+ label = "Left Joystick Up";
+ linux,code = <ABS_Y>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+ };
+
+ button@3 {
+ label = "Left Joystick Down";
+ linux,code = <ABS_Y>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+ };
+
+ button@4 {
+ label = "Right Joystick Left";
+ linux,code = <ABS_Z>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
+ };
+
+ button@5 {
+ label = "Right Joystick Right";
+ linux,code = <ABS_Z>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
+ };
+
+ button@6 {
+ label = "Right Joystick Up";
+ linux,code = <ABS_RZ>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
+ };
+
+ button@7 {
+ label = "Right Joystick Down";
+ linux,code = <ABS_RZ>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+ };
+
+ button@8 {
+ label = "DPad Left";
+ linux,code = <ABS_HAT0X>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
+ };
+
+ button@9 {
+ label = "DPad Right";
+ linux,code = <ABS_HAT0X>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+ };
+
+ button@10 {
+ label = "DPad Up";
+ linux,code = <ABS_HAT0Y>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+ };
+
+ button@11 {
+ label = "DPad Down";
+ linux,code = <ABS_HAT0Y>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+ };
+
+ button@12 {
+ label = "Button X";
+ linux,code = <BTN_X>;
+ gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
+ };
+
+ button@13 {
+ label = "Button Y";
+ linux,code = <BTN_Y>;
+ gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
+ };
+
+ button@14 {
+ label = "Button A";
+ linux,code = <BTN_A>;
+ gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+ };
+
+ button@15 {
+ label = "Button B";
+ linux,code = <BTN_B>;
+ gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
+ };
+
+ button@16 {
+ label = "Select Button";
+ linux,code = <BTN_SELECT>;
+ gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
+ };
+
+ button@17 {
+ label = "Start Button";
+ linux,code = <BTN_START>;
+ gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
+ };
+
+ button@18 {
+ label = "Top Left Button";
+ linux,code = <BTN_TL>;
+ gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+ };
+
+ button@19 {
+ label = "Top Right Button";
+ linux,code = <BTN_TR>;
+ gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
+ };
+ };
};
&cpu0 {
@@ -86,12 +239,29 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
+
+ /* Accelerometer */
+ bma250@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+ };
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
+
+ ft5406ee8: touchscreen@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ };
};
&lradc {
@@ -149,6 +319,17 @@
};
&pio {
+ key_pins_inet9f: key_pins@0 {
+ allwinner,pins = "PA0", "PA1", "PA3", "PA4",
+ "PA5", "PA6", "PA8", "PA9",
+ "PA11", "PA12", "PA13",
+ "PA14", "PA15", "PA16", "PA17",
+ "PH22", "PH23", "PH24", "PH25", "PH26";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";