arm: mach-omap2: am33xx: ddr: programming of EXT_PHY_CTRL1 and EXT_PHY_CTRL1_SHADOW
Adjust DQS skew in case where invert_clkout=1 is used.
Match recommended values from EMIF Tools app note:
http://www.ti.com/lit/an/sprac70/sprac70.pdf
Signed-off-by: Brad Griffis <bgriffis@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
diff --git a/arch/arm/mach-omap2/am33xx/ddr.c b/arch/arm/mach-omap2/am33xx/ddr.c
index be6f4d7..816d4e8 100644
--- a/arch/arm/mach-omap2/am33xx/ddr.c
+++ b/arch/arm/mach-omap2/am33xx/ddr.c
@@ -256,8 +256,16 @@
* Enable hardware leveling on the EMIF. For details about these
* magic values please see the EMIF registers section of the TRM.
*/
- writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
- writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1_shdw);
+ if (regs->emif_ddr_phy_ctlr_1 & 0x00040000) {
+ /* PHY_INVERT_CLKOUT = 1 */
+ writel(0x00040100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
+ writel(0x00040100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1_shdw);
+ } else {
+ /* PHY_INVERT_CLKOUT = 0 */
+ writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
+ writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1_shdw);
+ }
+
writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_22);
writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_22_shdw);
writel(0x00600020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_23);