arm: dts: sync the Rockhip 3399 SoCs from Linux

Sync the rk3399 DTs and associated bits from 5.14-rc1.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
(Remove the conflict content for vmarc-som)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
index 694b0d0..7b717eb 100644
--- a/arch/arm/dts/rk3399-evb.dts
+++ b/arch/arm/dts/rk3399-evb.dts
@@ -11,6 +11,10 @@
 	model = "Rockchip RK3399 Evaluation Board";
 	compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
 
+	aliases {
+		mmc0 = &sdhci;
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		brightness-levels = <
diff --git a/arch/arm/dts/rk3399-ficus.dts b/arch/arm/dts/rk3399-ficus.dts
index ebe2ee7..1ce85a5 100644
--- a/arch/arm/dts/rk3399-ficus.dts
+++ b/arch/arm/dts/rk3399-ficus.dts
@@ -27,42 +27,43 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
-			    <&user_led4>, <&wlan_led>, <&bt_led>;
+		pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
+			    <&user_led3_pin>, <&user_led4_pin>,
+			    <&wlan_led_pin>, <&bt_led_pin>;
 
-		user_led1 {
+		user_led1: led-1 {
 			label = "red:user1";
 			gpios = <&gpio4 25 0>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user_led2 {
+		user_led2: led-2 {
 			label = "red:user2";
 			gpios = <&gpio4 26 0>;
 			linux,default-trigger = "mmc0";
 		};
 
-		user_led3 {
+		user_led3: led-3 {
 			label = "red:user3";
 			gpios = <&gpio4 30 0>;
 			linux,default-trigger = "mmc1";
 		};
 
-		user_led4 {
+		user_led4: led-4 {
 			label = "red:user4";
 			gpios = <&gpio1 0 0>;
 			panic-indicator;
 			linux,default-trigger = "none";
 		};
 
-		wlan_active_led {
+		wlan_active_led: led-5 {
 			label = "red:wlan";
 			gpios = <&gpio1 1 0>;
 			linux,default-trigger = "phy0tx";
 			default-state = "off";
 		};
 
-		bt_active_led {
+		bt_active_led: led-6 {
 			label = "red:bt";
 			gpios = <&gpio1 4 0>;
 			linux,default-trigger = "hci0-power";
@@ -114,32 +115,32 @@
 	};
 
 	leds {
-		user_led1: user_led1 {
+		user_led1_pin: user-led1-pin {
 			rockchip,pins =
 				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led2: user_led2 {
+		user_led2_pin: user-led2-pin {
 			rockchip,pins =
 				<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led3: user_led3 {
+		user_led3_pin: user-led3-pin {
 			rockchip,pins =
 				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led4: user_led4 {
+		user_led4_pin: user-led4-pin {
 			rockchip,pins =
 				<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		wlan_led: wlan_led {
+		wlan_led_pin: wlan-led-pin {
 			rockchip,pins =
 				<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		bt_led: bt_led {
+		bt_led_pin: bt-led-pin {
 			rockchip,pins =
 				<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts
index d63faf3..c4dd2a6 100644
--- a/arch/arm/dts/rk3399-firefly.dts
+++ b/arch/arm/dts/rk3399-firefly.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
 #include "rk3399.dtsi"
 #include "rk3399-opp.dtsi"
 
@@ -13,6 +14,12 @@
 	model = "Firefly-RK3399 Board";
 	compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
 
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
@@ -88,18 +95,25 @@
 		};
 	};
 
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
 
-		work-led {
+		work_led: led-0 {
 			label = "work";
 			default-state = "on";
 			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 		};
 
-		diy-led {
+		diy_led: led-1 {
 			label = "diy";
 			default-state = "off";
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
@@ -145,6 +159,23 @@
 		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 	};
 
+	sound-dit {
+		compatible = "audio-graph-card";
+		label = "SPDIF";
+		dais = <&spdif_p0>;
+	};
+
+	spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port {
+			dit_p0_0: endpoint {
+				remote-endpoint = <&spdif_p0_0>;
+			};
+		};
+	};
+
 	/* switched by pmic_sleep */
 	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 		compatible = "regulator-fixed";
@@ -190,6 +221,17 @@
 		vin-supply = <&vcc_sys>;
 	};
 
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
 	vcc_sys: vcc-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
@@ -515,6 +557,53 @@
 	i2c-scl-falling-time-ns = <20>;
 	status = "okay";
 
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc5v0_typec>;
+		status = "okay";
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "host";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc_hs: endpoint {
+						remote-endpoint =
+							<&u2phy0_typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc_ss: endpoint {
+						remote-endpoint =
+							<&tcphy0_typec_ss>;
+					};
+				};
+			};
+		};
+	};
+
 	accelerometer@68 {
 		compatible = "invensense,mpu6500";
 		reg = <0x68>;
@@ -572,12 +661,34 @@
 		};
 	};
 
+	fusb302x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	lcd-panel {
 		lcd_panel_reset: lcd-panel-reset {
 			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
+	leds {
+		work_led_pin: work-led-pin {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_pin: diy-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pcie {
 		pcie_pwr_en: pcie-pwr-en {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -589,30 +700,34 @@
 	};
 
 	pmic {
-		vsel1_gpio: vsel1-gpio {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
 	rt5640 {
 		rt5640_hpcon: rt5640-hpcon {
 			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0_typec_en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
@@ -627,16 +742,6 @@
 			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
-
-	leds {
-		work_led_gpio: work_led-gpio {
-			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		diy_led_gpio: diy_led-gpio {
-			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
 };
 
 &pwm0 {
@@ -704,10 +809,29 @@
 	status = "okay";
 };
 
+&spdif {
+	pinctrl-0 = <&spdif_bus_1>;
+	status = "okay";
+
+	spdif_p0: port {
+		spdif_p0_0: endpoint {
+			remote-endpoint = <&dit_p0_0>;
+		};
+	};
+};
+
 &tcphy0 {
 	status = "okay";
 };
 
+&tcphy0_usb3 {
+	port {
+		tcphy0_typec_ss: endpoint {
+			remote-endpoint = <&usbc_ss>;
+		};
+	};
+};
+
 &tcphy1 {
 	status = "okay";
 };
@@ -731,6 +855,12 @@
 		phy-supply = <&vcc5v0_host>;
 		status = "okay";
 	};
+
+	port {
+		u2phy0_typec_hs: endpoint {
+			remote-endpoint = <&usbc_hs>;
+		};
+	};
 };
 
 &u2phy1 {
diff --git a/arch/arm/dts/rk3399-gru.dtsi b/arch/arm/dts/rk3399-gru.dtsi
index f9c5bb6..b80f190 100644
--- a/arch/arm/dts/rk3399-gru.dtsi
+++ b/arch/arm/dts/rk3399-gru.dtsi
@@ -10,6 +10,11 @@
 #include "rk3399-op1-opp.dtsi"
 
 / {
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -247,8 +252,8 @@
 		enable-active-high;
 		enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3000000 0x0>;
+		states = <1800000 0x1>,
+			 <3000000 0x0>;
 
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3000000>;
@@ -342,6 +347,7 @@
 	cpu-supply = <&ppvar_bigcpu>;
 };
 
+
 &cru {
 	assigned-clocks =
 		<&cru PLL_GPLL>, <&cru PLL_CPLL>,
@@ -515,7 +521,7 @@
 	 * configured as SDMMC and not JTAG.
 	 */
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_pin
 		     &sdmmc_bus4>;
 
 	bus-width = <4>;
@@ -766,7 +772,7 @@
 		};
 
 		/* This is where we actually hook up CD; has external pull */
-		sdmmc_cd_gpio: sdmmc-cd-gpio {
+		sdmmc_cd_pin: sdmmc-cd-pin {
 			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
diff --git a/arch/arm/dts/rk3399-khadas-edge.dtsi b/arch/arm/dts/rk3399-khadas-edge.dtsi
index e87a044..d5c7648 100644
--- a/arch/arm/dts/rk3399-khadas-edge.dtsi
+++ b/arch/arm/dts/rk3399-khadas-edge.dtsi
@@ -11,6 +11,12 @@
 #include "rk3399-opp.dtsi"
 
 / {
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
@@ -138,18 +144,26 @@
 		};
 	};
 
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+		linux,rc-map-name = "rc-khadas";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>;
+		pinctrl-0 = <&sys_led_pin>, <&user_led_pin>;
 
-		sys-led {
+		sys_led: led-0 {
 			label = "sys_led";
 			linux,default-trigger = "heartbeat";
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 		};
 
-		user-led {
+		user_led: led-1 {
 			label = "user_led";
 			default-state = "off";
 			gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
@@ -585,12 +599,18 @@
 		};
 	};
 
+	ir {
+		ir_rx: ir-rx {
+		    rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	leds {
-		sys_led_gpio: sys_led-gpio {
+		sys_led_pin: sys-led-pin {
 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led_gpio: user_led-gpio {
+		user_led_pin: user-led-pin {
 			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -690,6 +710,16 @@
 	status = "okay";
 };
 
+&spi1 {
+	status = "okay";
+
+	spiflash: flash@0 {
+		compatible = "winbond,w25q128fw", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
 &tcphy0 {
 	status = "okay";
 };
diff --git a/arch/arm/dts/rk3399-leez-p710.dts b/arch/arm/dts/rk3399-leez-p710.dts
index 73be38a..7c93f84 100644
--- a/arch/arm/dts/rk3399-leez-p710.dts
+++ b/arch/arm/dts/rk3399-leez-p710.dts
@@ -13,6 +13,12 @@
 	model = "Leez RK3399 P710";
 	compatible = "leez,p710", "rockchip,rk3399";
 
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
@@ -341,7 +347,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -360,7 +366,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -447,11 +453,11 @@
 			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
index e0d7561..452728b 100644
--- a/arch/arm/dts/rk3399-nanopc-t4.dts
+++ b/arch/arm/dts/rk3399-nanopc-t4.dts
@@ -95,6 +95,7 @@
 };
 
 &pcie0 {
+	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	vpcie3v3-supply = <&vcc3v3_sys>;
 };
diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
index 042c73c..cef4d18 100644
--- a/arch/arm/dts/rk3399-nanopi-r4s.dts
+++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
@@ -1,13 +1,15 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ * FriendlyElec NanoPC-T4 board device tree source
  *
- * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
  * (http://www.friendlyarm.com)
  *
  * Copyright (c) 2018 Collabora Ltd.
- * Copyright (c) 2019 Arm Ltd.
- * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
+ *
+ * Copyright (c) 2020 Jensen Huang <jensenhuang@friendlyarm.com>
+ * Copyright (c) 2020 Marty Jones <mj8263788@gmail.com>
+ * Copyright (c) 2021 Tianling Shen <cnsztl@gmail.com>
  */
 
 /dts-v1/;
@@ -17,82 +19,91 @@
 	model = "FriendlyElec NanoPi R4S";
 	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
 
+	/delete-node/ display-subsystem;
+
+	gpio-leds {
+		pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
+
+		/delete-node/ led-0;
+
+		lan_led: led-lan {
+			gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+			label = "green:lan";
+		};
+
+		sys_led: led-sys {
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			label = "red:power";
+			default-state = "on";
+		};
+
+		wan_led: led-wan {
+			gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+			label = "green:wan";
+		};
+	};
+
+	gpio-keys {
+		pinctrl-0 = <&reset_button_pin>;
+
+		/delete-node/ power;
+
+		reset {
+			debounce-interval = <50>;
+			gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
 	vdd_5v: vdd-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v";
 		regulator-always-on;
 		regulator-boot-on;
 	};
-
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		cooling-levels = <0 12 18 255>;
-		#cooling-cells = <2>;
-		fan-supply = <&vdd_5v>;
-		pwms = <&pwm1 0 50000 0>;
-	};
-};
-
-&cpu_thermal {
-	trips {
-		cpu_warm: cpu_warm {
-			temperature = <55000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		cpu_hot: cpu_hot {
-			temperature = <65000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
-
-	cooling-maps {
-		map2 {
-			trip = <&cpu_warm>;
-			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
-		};
-
-		map3 {
-			trip = <&cpu_hot>;
-			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
-		};
-	};
 };
 
 &emmc_phy {
 	status = "disabled";
 };
 
-&fusb0 {
+&i2c4 {
 	status = "disabled";
 };
 
-&leds {
-	lan_led: led-1 {
-		gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
-		label = "green:lan";
-	};
-
-	wan_led: led-2 {
-		gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-		label = "green:wan";
-	};
-};
-
-&leds_gpio {
-	rockchip,pins =
-		<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
-		<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
-};
-
 &pcie0 {
 	max-link-speed = <1>;
 	num-lanes = <1>;
 	vpcie3v3-supply = <&vcc3v3_sys>;
 };
 
+&pinctrl {
+	gpio-leds {
+		/delete-node/ status-led-pin;
+
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sys_led_pin: sys-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rockchip-key {
+		/delete-node/ power-key;
+
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
 &sdhci {
 	status = "disabled";
 };
@@ -109,6 +120,10 @@
 	status = "disabled";
 };
 
+&uart0 {
+	status = "disabled";
+};
+
 &usbdrd_dwc3_0 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
index c88018a..8c0ff6c 100644
--- a/arch/arm/dts/rk3399-nanopi4.dtsi
+++ b/arch/arm/dts/rk3399-nanopi4.dtsi
@@ -17,6 +17,12 @@
 #include "rk3399-opp.dtsi"
 
 / {
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
@@ -117,9 +123,9 @@
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&leds_gpio>;
+		pinctrl-0 = <&status_led_pin>;
 
-		status {
+		status_led: led-0 {
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 			label = "status_led";
 			linux,default-trigger = "heartbeat";
@@ -182,7 +188,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		rtl8211e: phy@1 {
+		rtl8211e: ethernet-phy@1 {
 			reg = <1>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
@@ -504,8 +510,6 @@
 };
 
 &pcie0 {
-	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <2>;
 	vpcie0v9-supply = <&vcca0v9_s3>;
 	vpcie1v8-supply = <&vcca1v8_s3>;
@@ -520,12 +524,12 @@
 	};
 
 	gpio-leds {
-		leds_gpio: leds-gpio {
+		status_led_pin: status-led-pin {
 			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
-	phy {
+	gmac {
 		phy_intb: phy-intb {
 			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
diff --git a/arch/arm/dts/rk3399-opp.dtsi b/arch/arm/dts/rk3399-opp.dtsi
index d6f1095..da41cd8 100644
--- a/arch/arm/dts/rk3399-opp.dtsi
+++ b/arch/arm/dts/rk3399-opp.dtsi
@@ -10,28 +10,28 @@
 
 		opp00 {
 			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <800000>;
+			opp-microvolt = <825000 825000 1250000>;
 			clock-latency-ns = <40000>;
 		};
 		opp01 {
 			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <800000>;
+			opp-microvolt = <825000 825000 1250000>;
 		};
 		opp02 {
 			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <850000>;
+			opp-microvolt = <850000 850000 1250000>;
 		};
 		opp03 {
 			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <925000>;
+			opp-microvolt = <925000 925000 1250000>;
 		};
 		opp04 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1000000>;
+			opp-microvolt = <1000000 1000000 1250000>;
 		};
 		opp05 {
 			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <1125000>;
+			opp-microvolt = <1125000 1125000 1250000>;
 		};
 	};
 
@@ -41,36 +41,36 @@
 
 		opp00 {
 			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <800000>;
+			opp-microvolt = <825000 825000 1250000>;
 			clock-latency-ns = <40000>;
 		};
 		opp01 {
 			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <800000>;
+			opp-microvolt = <825000 825000 1250000>;
 		};
 		opp02 {
 			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <825000>;
+			opp-microvolt = <825000 825000 1250000>;
 		};
 		opp03 {
 			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <875000>;
+			opp-microvolt = <875000 875000 1250000>;
 		};
 		opp04 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <950000>;
+			opp-microvolt = <950000 950000 1250000>;
 		};
 		opp05 {
 			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <1025000>;
+			opp-microvolt = <1025000 1025000 1250000>;
 		};
 		opp06 {
 			opp-hz = /bits/ 64 <1608000000>;
-			opp-microvolt = <1100000>;
+			opp-microvolt = <1100000 1100000 1250000>;
 		};
 		opp07 {
 			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <1200000>;
+			opp-microvolt = <1200000 1200000 1250000>;
 		};
 	};
 
@@ -79,27 +79,27 @@
 
 		opp00 {
 			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <800000>;
+			opp-microvolt = <825000 825000 1150000>;
 		};
 		opp01 {
 			opp-hz = /bits/ 64 <297000000>;
-			opp-microvolt = <800000>;
+			opp-microvolt = <825000 825000 1150000>;
 		};
 		opp02 {
 			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <825000>;
+			opp-microvolt = <825000 825000 1150000>;
 		};
 		opp03 {
 			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <875000>;
+			opp-microvolt = <875000 875000 1150000>;
 		};
 		opp04 {
 			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <925000>;
+			opp-microvolt = <925000 925000 1150000>;
 		};
 		opp05 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1100000>;
+			opp-microvolt = <1100000 1100000 1150000>;
 		};
 	};
 };
diff --git a/arch/arm/dts/rk3399-orangepi.dts b/arch/arm/dts/rk3399-orangepi.dts
index f9f7246..04b54ab 100644
--- a/arch/arm/dts/rk3399-orangepi.dts
+++ b/arch/arm/dts/rk3399-orangepi.dts
@@ -7,6 +7,7 @@
 
 #include "dt-bindings/pwm/pwm.h"
 #include "dt-bindings/input/input.h"
+#include "dt-bindings/usb/pd.h"
 #include "rk3399.dtsi"
 #include "rk3399-opp.dtsi"
 
@@ -14,6 +15,12 @@
 	model = "Orange Pi RK3399 Board";
 	compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
 
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
@@ -214,7 +221,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		rtl8211e: phy@1 {
+		rtl8211e: ethernet-phy@1 {
 			reg = <1>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
@@ -531,6 +538,43 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&chg_cc_int_l>;
 		vbus-supply = <&vbus_typec>;
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "host";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					typec_hs: endpoint {
+						remote-endpoint = <&u2phy0_typec_hs>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					typec_ss: endpoint {
+						remote-endpoint = <&tcphy0_typec_ss>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					typec_dp: endpoint {
+						remote-endpoint = <&tcphy0_typec_dp>;
+					};
+				};
+			};
+		};
 	};
 };
 
@@ -554,7 +598,7 @@
 		};
 	};
 
-	phy {
+	gmac {
 		phy_intb: phy-intb {
 			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
@@ -717,6 +761,22 @@
 	status = "okay";
 };
 
+&tcphy0_dp {
+	port {
+		tcphy0_typec_dp: endpoint {
+			remote-endpoint = <&typec_dp>;
+		};
+	};
+};
+
+&tcphy0_usb3 {
+	port {
+		tcphy0_typec_ss: endpoint {
+			remote-endpoint = <&typec_ss>;
+		};
+	};
+};
+
 &tcphy1 {
 	status = "okay";
 };
@@ -739,6 +799,12 @@
 		phy-supply = <&vcc5v0_host>;
 		status = "okay";
 	};
+
+	port {
+		u2phy0_typec_hs: endpoint {
+			remote-endpoint = <&typec_hs>;
+		};
+	};
 };
 
 &u2phy1 {
@@ -799,7 +865,7 @@
 
 &usbdrd_dwc3_0 {
 	status = "okay";
-	dr_mode = "otg";
+	dr_mode = "host";
 };
 
 &usbdrd3_1 {
diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts b/arch/arm/dts/rk3399-pinebook-pro.dts
index 294d21b..2b5f001 100644
--- a/arch/arm/dts/rk3399-pinebook-pro.dts
+++ b/arch/arm/dts/rk3399-pinebook-pro.dts
@@ -18,6 +18,12 @@
 	model = "Pine64 Pinebook Pro";
 	compatible = "pine64,pinebook-pro", "rockchip,rk3399";
 
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
@@ -28,12 +34,19 @@
 		pwms = <&pwm0 0 740740 0>;
 	};
 
+	bat: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <9800000>;
+		voltage-max-design-microvolt = <4350000>;
+		voltage-min-design-microvolt = <3000000>;
+	};
+
 	edp_panel: edp-panel {
 		compatible = "boe,nv140fhmn49";
 		backlight = <&backlight>;
 		enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&panel_en_gpio>;
+		pinctrl-0 = <&panel_en_pin>;
 		power-supply = <&vcc3v3_panel>;
 
 		ports {
@@ -60,7 +73,7 @@
 	gpio-key-lid {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
-		pinctrl-0 = <&lidbtn_gpio>;
+		pinctrl-0 = <&lidbtn_pin>;
 
 		lid {
 			debounce-interval = <20>;
@@ -76,7 +89,7 @@
 	gpio-key-power {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn_gpio>;
+		pinctrl-0 = <&pwrbtn_pin>;
 
 		power {
 			debounce-interval = <20>;
@@ -90,9 +103,9 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
+		pinctrl-0 = <&pwr_led_pin &slp_led_pin>;
 
-		green-led {
+		green_led: led-0 {
 			color = <LED_COLOR_ID_GREEN>;
 			default-state = "on";
 			function = LED_FUNCTION_POWER;
@@ -100,7 +113,7 @@
 			label = "green:power";
 		};
 
-		red-led {
+		red_led: led-1 {
 			color = <LED_COLOR_ID_RED>;
 			default-state = "off";
 			function = LED_FUNCTION_STANDBY;
@@ -117,7 +130,7 @@
 		clocks = <&rk808 1>;
 		clock-names = "ext_clock";
 		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h_gpio>;
+		pinctrl-0 = <&wifi_enable_h_pin>;
 		post-power-on-delay-ms = <100>;
 		power-off-delay-us = <500000>;
 
@@ -129,7 +142,7 @@
 	es8316-sound {
 		compatible = "simple-audio-card";
 		pinctrl-names = "default";
-		pinctrl-0 = <&hp_det_gpio>;
+		pinctrl-0 = <&hp_det_pin>;
 		simple-audio-card,name = "rockchip,es8316-codec";
 		simple-audio-card,format = "i2s";
 		simple-audio-card,mclk-fs = <256>;
@@ -213,7 +226,7 @@
 		enable-active-high;
 		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwr_5v_gpio>;
+		pinctrl-0 = <&pwr_5v_pin>;
 		regulator-name = "vcc5v0_usb";
 		regulator-always-on;
 		regulator-min-microvolt = <5000000>;
@@ -270,7 +283,7 @@
 		enable-active-high;
 		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
+		pinctrl-0 = <&sdmmc0_pwr_h_pin>;
 		regulator-name = "vcc3v0_sd";
 		regulator-always-on;
 		regulator-min-microvolt = <3000000>;
@@ -288,7 +301,7 @@
 		enable-active-high;
 		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&lcdvcc_en_gpio>;
+		pinctrl-0 = <&lcdvcc_en_pin>;
 		regulator-name = "vcc3v3_panel";
 		regulator-always-on;
 		regulator-min-microvolt = <3300000>;
@@ -317,7 +330,7 @@
 		enable-active-high;
 		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en_gpio>;
+		pinctrl-0 = <&vcc5v0_host_en_pin>;
 		regulator-name = "vcc5v0_otg";
 		regulator-always-on;
 		regulator-min-microvolt = <5000000>;
@@ -336,7 +349,7 @@
 		enable-active-high;
 		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
+		pinctrl-0 = <&vcc5v0_typec0_en_pin>;
 		regulator-name = "vbus_5vout";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -368,7 +381,7 @@
 
 		/* Also triggered by USB charger */
 		pinctrl-names = "default";
-		pinctrl-0 = <&dc_det_gpio>;
+		pinctrl-0 = <&dc_det_pin>;
 	};
 };
 
@@ -447,7 +460,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l_gpio>;
+		pinctrl-0 = <&pmic_int_l_pin>;
 		rockchip,system-power-controller;
 		wakeup-source;
 
@@ -627,7 +640,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-always-on;
 		regulator-boot-on;
@@ -646,7 +659,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-always-on;
 		regulator-boot-on;
@@ -690,9 +703,10 @@
 	fusb0: fusb30x@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
-		fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int_gpio>;
+		pinctrl-0 = <&fusb0_int_pin>;
 		vbus-supply = <&vbus_typec>;
 
 		connector {
@@ -740,12 +754,29 @@
 			};
 		};
 	};
+
+	cw2015@62 {
+		compatible = "cellwise,cw2015";
+		reg = <0x62>;
+		cellwise,battery-profile = /bits/ 8 <
+			0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+			0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+			0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+			0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+			0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+			0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+			0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+			0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+		>;
+		cellwise,monitor-interval-ms = <5000>;
+		monitored-battery = <&bat>;
+		power-supplies = <&mains_charger>, <&fusb0>;
+	};
 };
 
 &i2s1 {
-	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
+	pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
 	rockchip,capture-channels = <8>;
 	rockchip,playback-channels = <8>;
 	status = "okay";
@@ -765,7 +796,6 @@
 &pcie0 {
 	bus-scan-delay-ms = <1000>;
 	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;
@@ -777,116 +807,116 @@
 
 &pinctrl {
 	buttons {
-		pwrbtn_gpio: pwrbtn-gpio {
+		pwrbtn_pin: pwrbtn-pin {
 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		lidbtn_gpio: lidbtn-gpio {
+		lidbtn_pin: lidbtn-pin {
 			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	dc-charger {
-		dc_det_gpio: dc-det-gpio {
+		dc_det_pin: dc-det-pin {
 			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	es8316 {
-		hp_det_gpio: hp-det-gpio {
+		hp_det_pin: hp-det-pin {
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	fusb302x {
-		fusb0_int_gpio: fusb0-int-gpio {
+		fusb0_int_pin: fusb0-int-pin {
 			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	i2s1 {
-		i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
+		i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
 			rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
 		};
 	};
 
 	lcd-panel {
-		lcdvcc_en_gpio: lcdvcc-en-gpio {
+		lcdvcc_en_pin: lcdvcc-en-pin {
 			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		panel_en_gpio: panel-en-gpio {
+		panel_en_pin: panel-en-pin {
 			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		lcd_panel_reset_gpio: lcd-panel-reset-gpio {
+		lcd_panel_reset_pin: lcd-panel-reset-pin {
 			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	leds {
-		pwrled_gpio: pwrled_gpio {
+		pwr_led_pin: pwr-led-pin {
 			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		slpled_gpio: slpled_gpio {
+		slp_led_pin: slp-led-pin {
 			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	pmic {
-		pmic_int_l_gpio: pmic-int-l-gpio {
+		pmic_int_l_pin: pmic-int-l-pin {
 			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
 	sdcard {
-		sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
+		sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin {
 			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 	};
 
 	sdio-pwrseq {
-		wifi_enable_h_gpio: wifi-enable-h-gpio {
+		wifi_enable_h_pin: wifi-enable-h-pin {
 			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	usb-typec {
-		vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
+		vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin {
 			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	usb2 {
-		pwr_5v_gpio: pwr-5v-gpio {
+		pwr_5v_pin: pwr-5v-pin {
 			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
+		vcc5v0_host_en_pin: vcc5v0-host-en-pin {
 			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	wireless-bluetooth {
-		bt_wake_gpio: bt-wake-gpio {
+		bt_wake_pin: bt-wake-pin {
 			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		bt_host_wake_gpio: bt-host-wake-gpio {
+		bt_host_wake_pin: bt-host-wake-pin {
 			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		bt_reset_gpio: bt-reset-gpio {
+		bt_reset_pin: bt-reset-pin {
 			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -1034,7 +1064,7 @@
 		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 		max-speed = <1500000>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
+		pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
 		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
 		vbat-supply = <&wifi_bat>;
 		vddio-supply = <&vcc_wl>;
diff --git a/arch/arm/dts/rk3399-puma-haikou.dts b/arch/arm/dts/rk3399-puma-haikou.dts
index d80d6b7..292bb7e 100644
--- a/arch/arm/dts/rk3399-puma-haikou.dts
+++ b/arch/arm/dts/rk3399-puma-haikou.dts
@@ -10,14 +10,18 @@
 	model = "Theobroma Systems RK3399-Q7 SoM";
 	compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
 
+	aliases {
+		mmc1 = &sdmmc;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
-		pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>;
+		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
 
-		sd-card-led {
+		sd_card_led: led-1 {
 			label = "sd_card_led";
 			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
@@ -179,7 +183,7 @@
 	};
 
 	leds {
-		led_sd_haikou: led-sd-gpio {
+		sd_card_led_pin: sd-card-led-pin {
 			rockchip,pins =
 			  <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 72c06ab..fb67db4 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -8,12 +8,16 @@
 #include "rk3399-opp.dtsi"
 
 / {
+	aliases {
+		mmc0 = &sdhci;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_module>;
+		pinctrl-0 = <&module_led_pin>;
 
-		module-led {
+		module_led: led-0 {
 			label = "module_led";
 			gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -21,57 +25,6 @@
 		};
 	};
 
-	/*
-	 * Overwrite the opp-table for CPUB as this board uses a different
-	 * regulator (FAN53555) that only allows 10mV steps and therefore
-	 * can't reach the operation point target voltages from rk3399-opp.dtsi
-	 */
-	/delete-node/ opp-table1;
-	cluster1_opp: opp-table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <800000>;
-			clock-latency-ns = <40000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <800000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <830000>;
-			opp-suspend;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <880000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <950000>;
-		};
-		opp05 {
-			opp-hz = /bits/ 64 <1416000000>;
-			opp-microvolt = <1030000>;
-		};
-		opp06 {
-			opp-hz = /bits/ 64 <1608000000>;
-			opp-microvolt = <1100000>;
-		};
-		opp07 {
-			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <1200000>;
-		};
-		opp08 {
-			opp-hz = /bits/ 64 <1992000000>;
-			opp-microvolt = <1230000>;
-			turbo-mode;
-		};
-	};
-
 	clkin_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -450,7 +403,7 @@
 	};
 
 	leds {
-		led_pin_module: led-module-gpio {
+		module_led_pin: module-led-pin {
 			rockchip,pins =
 			  <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
diff --git a/arch/arm/dts/rk3399-roc-pc-mezzanine.dts b/arch/arm/dts/rk3399-roc-pc-mezzanine.dts
index 2acb3d5..9447c87 100644
--- a/arch/arm/dts/rk3399-roc-pc-mezzanine.dts
+++ b/arch/arm/dts/rk3399-roc-pc-mezzanine.dts
@@ -11,6 +11,20 @@
 	model = "Firefly ROC-RK3399-PC Mezzanine Board";
 	compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399";
 
+	aliases {
+		mmc2 = &sdio0;
+	};
+
+	/* MP8009 PoE PD */
+	poe_12v: poe-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "poe_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
 	vcc3v3_ngff: vcc3v3-ngff {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_ngff";
@@ -22,7 +36,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&sys_12v>;
 	};
 
 	vcc3v3_pcie: vcc3v3-pcie {
@@ -34,10 +48,14 @@
 		pinctrl-0 = <&vcc3v3_pcie_en>;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&sys_12v>;
 	};
 };
 
+&sys_12v {
+	vin-supply = <&poe_12v>;
+};
+
 &pcie_phy {
 	status = "okay";
 };
diff --git a/arch/arm/dts/rk3399-roc-pc.dtsi b/arch/arm/dts/rk3399-roc-pc.dtsi
index 9f225e9..d1aaf8e 100644
--- a/arch/arm/dts/rk3399-roc-pc.dtsi
+++ b/arch/arm/dts/rk3399-roc-pc.dtsi
@@ -13,6 +13,11 @@
 	model = "Firefly ROC-RK3399-PC Board";
 	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
 
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+	};
+
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
@@ -58,30 +63,37 @@
 		};
 	};
 
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>;
 
-		work-led {
+		work_led: led-0 {
 			label = "green:work";
 			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		diy-led {
+		diy_led: led-1 {
 			label = "red:diy";
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			linux,default-trigger = "mmc1";
+			linux,default-trigger = "mmc2";
 		};
 
-		yellow-led {
+		yellow_led: led-2 {
 			label = "yellow:yellow-led";
 			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			linux,default-trigger = "mmc0";
+			linux,default-trigger = "mmc1";
 		};
 	};
 
@@ -110,6 +122,14 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
+	sys_12v: sys-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc_12v>;
+	};
+
 	/* switched by pmic_sleep */
 	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 		compatible = "regulator-fixed";
@@ -141,7 +161,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&sys_12v>;
 	};
 
 	vcca_0v9: vcca-0v9 {
@@ -186,7 +206,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&sys_12v>;
 	};
 
 	vdd_log: vdd-log {
@@ -376,6 +396,7 @@
 
 			vcc_sdio: LDO_REG4 {
 				regulator-name = "vcc_sdio";
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3000000>;
@@ -456,7 +477,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -475,11 +496,13 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
 		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
 		vin-supply = <&vcc3v3_sys>;
 
 		regulator-state-mem {
@@ -588,6 +611,12 @@
 		};
 	};
 
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	lcd-panel {
 		lcd_panel_reset: lcd-panel-reset {
 			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -595,25 +624,25 @@
 	};
 
 	leds {
-		diy_led_gpio: diy_led-gpio {
+		diy_led_pin: diy-led-pin {
 			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		work_led_gpio: work_led-gpio {
+		work_led_pin: work-led-pin {
 			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		yellow_led_gpio: yellow_led-gpio {
+		yellow_led_pin: yellow-led-pin {
 			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	pmic {
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
diff --git a/arch/arm/dts/rk3399-rock-pi-4.dtsi b/arch/arm/dts/rk3399-rock-pi-4.dtsi
index 1c55a46..b28888e 100644
--- a/arch/arm/dts/rk3399-rock-pi-4.dtsi
+++ b/arch/arm/dts/rk3399-rock-pi-4.dtsi
@@ -11,6 +11,11 @@
 #include "rk3399-opp.dtsi"
 
 / {
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+	};
+
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
@@ -111,10 +116,6 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
 	};
 
 	vdd_log: vdd-log {
@@ -362,8 +363,6 @@
 				regulator-name = "vcc_cam";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -373,8 +372,6 @@
 				regulator-name = "vcc_mipi";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -387,7 +384,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -406,7 +403,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -440,8 +437,9 @@
 };
 
 &i2s0 {
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <8>;
+	pinctrl-0 = <&i2s0_2ch_bus>;
+	rockchip,capture-channels = <2>;
+	rockchip,playback-channels = <2>;
 	status = "okay";
 };
 
@@ -476,7 +474,6 @@
 
 &pcie0 {
 	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
@@ -529,11 +526,11 @@
 			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
@@ -680,7 +677,7 @@
 
 &usbdrd_dwc3_0 {
 	status = "okay";
-	dr_mode = "otg";
+	dr_mode = "host";
 };
 
 &usbdrd3_1 {
diff --git a/arch/arm/dts/rk3399-rock-pi-4a.dts b/arch/arm/dts/rk3399-rock-pi-4a.dts
index d96dd3e..89f2af5 100644
--- a/arch/arm/dts/rk3399-rock-pi-4a.dts
+++ b/arch/arm/dts/rk3399-rock-pi-4a.dts
@@ -9,5 +9,5 @@
 
 / {
 	model = "Radxa ROCK Pi 4A";
-	compatible = "radxa,rockpi4", "rockchip,rk3399";
+	compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399";
 };
diff --git a/arch/arm/dts/rk3399-rock-pi-4b.dts b/arch/arm/dts/rk3399-rock-pi-4b.dts
index 4ca970a..6c63e61 100644
--- a/arch/arm/dts/rk3399-rock-pi-4b.dts
+++ b/arch/arm/dts/rk3399-rock-pi-4b.dts
@@ -9,7 +9,11 @@
 
 / {
 	model = "Radxa ROCK Pi 4B";
-	compatible = "radxa,rockpi4", "rockchip,rk3399";
+	compatible = "radxa,rockpi4b", "radxa,rockpi4", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
 };
 
 &sdio0 {
diff --git a/arch/arm/dts/rk3399-rock-pi-4c.dts b/arch/arm/dts/rk3399-rock-pi-4c.dts
index 9d07ebd..99169bc 100644
--- a/arch/arm/dts/rk3399-rock-pi-4c.dts
+++ b/arch/arm/dts/rk3399-rock-pi-4c.dts
@@ -10,7 +10,11 @@
 
 / {
 	model = "Radxa ROCK Pi 4C";
-	compatible = "radxa,rockpi4", "rockchip,rk3399";
+	compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
 };
 
 &sdio0 {
diff --git a/arch/arm/dts/rk3399-rock960.dts b/arch/arm/dts/rk3399-rock960.dts
index 437a75f..1a23e8f 100644
--- a/arch/arm/dts/rk3399-rock960.dts
+++ b/arch/arm/dts/rk3399-rock960.dts
@@ -17,42 +17,43 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
-			    <&user_led4>, <&wlan_led>, <&bt_led>;
+		pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
+			    <&user_led3_pin>, <&user_led4_pin>,
+			    <&wlan_led_pin>, <&bt_led_pin>;
 
-		user_led1 {
+		user_led1: led-1 {
 			label = "green:user1";
 			gpios = <&gpio4 RK_PC2 0>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user_led2 {
+		user_led2: led-2 {
 			label = "green:user2";
 			gpios = <&gpio4 RK_PC6 0>;
 			linux,default-trigger = "mmc0";
 		};
 
-		user_led3 {
+		user_led3: led-3 {
 			label = "green:user3";
 			gpios = <&gpio4 RK_PD0 0>;
 			linux,default-trigger = "mmc1";
 		};
 
-		user_led4 {
+		user_led4: led-4 {
 			label = "green:user4";
 			gpios = <&gpio4 RK_PD4 0>;
 			panic-indicator;
 			linux,default-trigger = "none";
 		};
 
-		wlan_active_led {
+		wlan_active_led: led-5 {
 			label = "yellow:wlan";
 			gpios = <&gpio4 RK_PD5 0>;
 			linux,default-trigger = "phy0tx";
 			default-state = "off";
 		};
 
-		bt_active_led {
+		bt_active_led: led-6 {
 			label = "blue:bt";
 			gpios = <&gpio4 RK_PD6 0>;
 			linux,default-trigger = "hci0-power";
@@ -62,38 +63,52 @@
 
 };
 
+&cpu_alert0 {
+	temperature = <65000>;
+};
+
+&cpu_thermal {
+	sustainable-power = <1550>;
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert1>;
+		};
+	};
+};
+
 &pcie0 {
 	ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
 };
 
 &pinctrl {
 	leds {
-		user_led1: user_led1 {
+		user_led1_pin: user-led1-pin {
 			rockchip,pins =
 				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led2: user_led2 {
+		user_led2_pin: user-led2-pin {
 			rockchip,pins =
 				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led3: user_led3 {
+		user_led3_pin: user-led3-pin {
 			rockchip,pins =
 				<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led4: user_led4 {
+		user_led4_pin: user-led4-pin {
 			rockchip,pins =
 				<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		wlan_led: wlan_led {
+		wlan_led_pin: wlan-led-pin {
 			rockchip,pins =
 				<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		bt_led: bt_led {
+		bt_led_pin: bt-led-pin {
 			rockchip,pins =
 				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
@@ -124,45 +139,6 @@
 	status = "okay";
 };
 
-&thermal_zones {
-	cpu_thermal: cpu {
-		polling-delay-passive = <100>;
-		polling-delay = <1000>;
-		thermal-sensors = <&tsadc 0>;
-		sustainable-power = <1550>;
-
-		trips {
-			cpu_alert0: cpu_alert0 {
-				    temperature = <65000>;
-				    hysteresis = <2000>;
-				    type = "passive";
-			};
-
-			cpu_alert1: cpu_alert1 {
-				    temperature = <75000>;
-				    hysteresis = <2000>;
-				    type = "passive";
-			};
-
-			cpu_crit: cpu_crit {
-				  temperature = <95000>;
-				  hysteresis = <2000>;
-				  type = "critical";
-			};
-		};
-
-		cooling-maps {
-			     map0 {
-
-			     trip = <&cpu_alert1>;
-			     cooling-device =
-					<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-					<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-			};
-		};
-	};
-};
-
 &usbdrd_dwc3_0 {
 	dr_mode = "otg";
 };
diff --git a/arch/arm/dts/rk3399-rock960.dtsi b/arch/arm/dts/rk3399-rock960.dtsi
index ba7c75c..25dc61c 100644
--- a/arch/arm/dts/rk3399-rock960.dtsi
+++ b/arch/arm/dts/rk3399-rock960.dtsi
@@ -9,6 +9,12 @@
 #include "rk3399-opp.dtsi"
 
 / {
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk808 1>;
@@ -470,12 +476,12 @@
 				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins =
 				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins =
 				<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
diff --git a/arch/arm/dts/rk3399-rockpro64.dtsi b/arch/arm/dts/rk3399-rockpro64.dtsi
index 9bca258..6bff8db 100644
--- a/arch/arm/dts/rk3399-rockpro64.dtsi
+++ b/arch/arm/dts/rk3399-rockpro64.dtsi
@@ -10,6 +10,12 @@
 #include "rk3399-opp.dtsi"
 
 / {
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
@@ -36,18 +42,25 @@
 		};
 	};
 
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
 
-		work-led {
+		work_led: led-0 {
 			label = "work";
 			default-state = "on";
 			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
 		};
 
-		diy-led {
+		diy_led: led-1 {
 			label = "diy";
 			default-state = "off";
 			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
@@ -72,10 +85,27 @@
 
 	sound {
 		compatible = "audio-graph-card";
-		label = "rockchip,rk3399";
+		label = "Analog";
 		dais = <&i2s1_p0>;
 	};
 
+	sound-dit {
+		compatible = "audio-graph-card";
+		label = "SPDIF";
+		dais = <&spdif_p0>;
+	};
+
+	spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port {
+			dit_p0_0: endpoint {
+				remote-endpoint = <&spdif_p0_0>;
+			};
+		};
+	};
+
 	vcc12v_dcin: vcc12v-dcin {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
@@ -96,6 +126,24 @@
 		vin-supply = <&vcc_1v8>;
 	};
 
+	/* micro SD card power */
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
 	vcc3v3_pcie: vcc3v3-pcie-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -427,7 +475,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -446,7 +494,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -569,12 +617,18 @@
 		};
 	};
 
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	leds {
-		work_led_gpio: work_led-gpio {
+		work_led_pin: work-led-pin {
 			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		diy_led_gpio: diy_led-gpio {
+		diy_led_pin: diy-led-pin {
 			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -594,15 +648,22 @@
 			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
+	sdcard {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
 	sdio-pwrseq {
 		wifi_enable_h: wifi-enable-h {
 			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -661,6 +722,8 @@
 	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
 	status = "okay";
 };
 
@@ -671,6 +734,16 @@
 	status = "okay";
 };
 
+&spdif {
+	pinctrl-0 = <&spdif_bus_1>;
+
+	spdif_p0: port {
+		spdif_p0_0: endpoint {
+			remote-endpoint = <&dit_p0_0>;
+		};
+	};
+};
+
 &spi1 {
 	status = "okay";
 
@@ -768,7 +841,7 @@
 
 &usbdrd_dwc3_0 {
 	status = "okay";
-	dr_mode = "otg";
+	dr_mode = "host";
 };
 
 &usbdrd3_1 {
diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
index 74f2c3d..3871c7f 100644
--- a/arch/arm/dts/rk3399.dtsi
+++ b/arch/arm/dts/rk3399.dtsi
@@ -197,38 +197,12 @@
 		#clock-cells = <0>;
 	};
 
-	amba: bus {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		dmac_bus: dma-controller@ff6d0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x0 0xff6d0000 0x0 0x4000>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
-				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
-			#dma-cells = <1>;
-			clocks = <&cru ACLK_DMAC0_PERILP>;
-			clock-names = "apb_pclk";
-		};
-
-		dmac_peri: dma-controller@ff6e0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x0 0xff6e0000 0x0 0x4000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
-				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
-			#dma-cells = <1>;
-			clocks = <&cru ACLK_DMAC1_PERILP>;
-			clock-names = "apb_pclk";
-		};
-	};
-
 	pcie0: pcie@f8000000 {
 		compatible = "rockchip,rk3399-pcie";
 		reg = <0x0 0xf8000000 0x0 0x2000000>,
 		      <0x0 0xfd000000 0x0 0x1000000>;
 		reg-names = "axi-base", "apb-base";
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
@@ -247,15 +221,14 @@
 				<0 0 0 2 &pcie0_intc 1>,
 				<0 0 0 3 &pcie0_intc 2>,
 				<0 0 0 4 &pcie0_intc 3>;
-		linux,pci-domain = <0>;
 		max-link-speed = <1>;
 		msi-map = <0x0 &its 0x0 0x1000>;
 		phys = <&pcie_phy 0>, <&pcie_phy 1>,
 		       <&pcie_phy 2>, <&pcie_phy 3>;
 		phy-names = "pcie-phy-0", "pcie-phy-1",
 			    "pcie-phy-2", "pcie-phy-3";
-		ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000
-			  0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
+		ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
+			 <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
 		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
 			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
 			 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
@@ -326,7 +299,7 @@
 		status = "disabled";
 	};
 
-	sdhci: sdhci@fe330000 {
+	sdhci: mmc@fe330000 {
 		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
 		reg = <0x0 0xfe330000 0x0 0x10000>;
 		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -403,7 +376,7 @@
 		reset-names = "usb3-otg";
 		status = "disabled";
 
-		usbdrd_dwc3_0: dwc3 {
+		usbdrd_dwc3_0: usb@fe800000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -439,7 +412,7 @@
 		reset-names = "usb3-otg";
 		status = "disabled";
 
-		usbdrd_dwc3_1: dwc3 {
+		usbdrd_dwc3_1: usb@fe900000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -759,7 +732,7 @@
 	};
 
 	thermal_zones: thermal-zones {
-		cpu_thermal: cpu {
+		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <100>;
 			polling-delay = <1000>;
 
@@ -803,7 +776,7 @@
 			};
 		};
 
-		gpu_thermal: gpu {
+		gpu_thermal: gpu-thermal {
 			polling-delay-passive = <100>;
 			polling-delay = <1000>;
 
@@ -845,135 +818,135 @@
 		rockchip,grf = <&grf>;
 		rockchip,hw-tshut-temp = <95000>;
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_gpio>;
+		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_gpio>;
+		pinctrl-2 = <&otp_pin>;
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
 	};
 
 	qos_emmc: qos@ffa58000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffa58000 0x0 0x20>;
 	};
 
 	qos_gmac: qos@ffa5c000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffa5c000 0x0 0x20>;
 	};
 
 	qos_pcie: qos@ffa60080 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffa60080 0x0 0x20>;
 	};
 
 	qos_usb_host0: qos@ffa60100 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffa60100 0x0 0x20>;
 	};
 
 	qos_usb_host1: qos@ffa60180 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffa60180 0x0 0x20>;
 	};
 
 	qos_usb_otg0: qos@ffa70000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffa70000 0x0 0x20>;
 	};
 
 	qos_usb_otg1: qos@ffa70080 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffa70080 0x0 0x20>;
 	};
 
 	qos_sd: qos@ffa74000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffa74000 0x0 0x20>;
 	};
 
 	qos_sdioaudio: qos@ffa76000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffa76000 0x0 0x20>;
 	};
 
 	qos_hdcp: qos@ffa90000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffa90000 0x0 0x20>;
 	};
 
 	qos_iep: qos@ffa98000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffa98000 0x0 0x20>;
 	};
 
 	qos_isp0_m0: qos@ffaa0000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffaa0000 0x0 0x20>;
 	};
 
 	qos_isp0_m1: qos@ffaa0080 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffaa0080 0x0 0x20>;
 	};
 
 	qos_isp1_m0: qos@ffaa8000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffaa8000 0x0 0x20>;
 	};
 
 	qos_isp1_m1: qos@ffaa8080 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffaa8080 0x0 0x20>;
 	};
 
 	qos_rga_r: qos@ffab0000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffab0000 0x0 0x20>;
 	};
 
 	qos_rga_w: qos@ffab0080 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffab0080 0x0 0x20>;
 	};
 
 	qos_video_m0: qos@ffab8000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffab8000 0x0 0x20>;
 	};
 
 	qos_video_m1_r: qos@ffac0000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffac0000 0x0 0x20>;
 	};
 
 	qos_video_m1_w: qos@ffac0080 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffac0080 0x0 0x20>;
 	};
 
 	qos_vop_big_r: qos@ffac8000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffac8000 0x0 0x20>;
 	};
 
 	qos_vop_big_w: qos@ffac8080 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffac8080 0x0 0x20>;
 	};
 
 	qos_vop_little: qos@ffad0000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffad0000 0x0 0x20>;
 	};
 
 	qos_perihp: qos@ffad8080 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffad8080 0x0 0x20>;
 	};
 
 	qos_gpu: qos@ffae0000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3399-qos", "syscon";
 		reg = <0x0 0xffae0000 0x0 0x20>;
 	};
 
@@ -995,126 +968,146 @@
 			#size-cells = <0>;
 
 			/* These power domains are grouped by VD_CENTER */
-			pd_iep@RK3399_PD_IEP {
+			power-domain@RK3399_PD_IEP {
 				reg = <RK3399_PD_IEP>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru HCLK_IEP>;
 				pm_qos = <&qos_iep>;
+				#power-domain-cells = <0>;
 			};
-			pd_rga@RK3399_PD_RGA {
+			power-domain@RK3399_PD_RGA {
 				reg = <RK3399_PD_RGA>;
 				clocks = <&cru ACLK_RGA>,
 					 <&cru HCLK_RGA>;
 				pm_qos = <&qos_rga_r>,
 					 <&qos_rga_w>;
+				#power-domain-cells = <0>;
 			};
-			pd_vcodec@RK3399_PD_VCODEC {
+			power-domain@RK3399_PD_VCODEC {
 				reg = <RK3399_PD_VCODEC>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;
 				pm_qos = <&qos_video_m0>;
+				#power-domain-cells = <0>;
 			};
-			pd_vdu@RK3399_PD_VDU {
+			power-domain@RK3399_PD_VDU {
 				reg = <RK3399_PD_VDU>;
 				clocks = <&cru ACLK_VDU>,
 					 <&cru HCLK_VDU>;
 				pm_qos = <&qos_video_m1_r>,
 					 <&qos_video_m1_w>;
+				#power-domain-cells = <0>;
 			};
 
 			/* These power domains are grouped by VD_GPU */
-			pd_gpu@RK3399_PD_GPU {
+			power-domain@RK3399_PD_GPU {
 				reg = <RK3399_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
 			};
 
 			/* These power domains are grouped by VD_LOGIC */
-			pd_edp@RK3399_PD_EDP {
+			power-domain@RK3399_PD_EDP {
 				reg = <RK3399_PD_EDP>;
 				clocks = <&cru PCLK_EDP_CTRL>;
+				#power-domain-cells = <0>;
 			};
-			pd_emmc@RK3399_PD_EMMC {
+			power-domain@RK3399_PD_EMMC {
 				reg = <RK3399_PD_EMMC>;
 				clocks = <&cru ACLK_EMMC>;
 				pm_qos = <&qos_emmc>;
+				#power-domain-cells = <0>;
 			};
-			pd_gmac@RK3399_PD_GMAC {
+			power-domain@RK3399_PD_GMAC {
 				reg = <RK3399_PD_GMAC>;
 				clocks = <&cru ACLK_GMAC>,
 					 <&cru PCLK_GMAC>;
 				pm_qos = <&qos_gmac>;
+				#power-domain-cells = <0>;
 			};
-			pd_sd@RK3399_PD_SD {
+			power-domain@RK3399_PD_SD {
 				reg = <RK3399_PD_SD>;
 				clocks = <&cru HCLK_SDMMC>,
 					 <&cru SCLK_SDMMC>;
 				pm_qos = <&qos_sd>;
+				#power-domain-cells = <0>;
 			};
-			pd_sdioaudio@RK3399_PD_SDIOAUDIO {
+			power-domain@RK3399_PD_SDIOAUDIO {
 				reg = <RK3399_PD_SDIOAUDIO>;
 				clocks = <&cru HCLK_SDIO>;
 				pm_qos = <&qos_sdioaudio>;
+				#power-domain-cells = <0>;
 			};
-			pd_usb3@RK3399_PD_USB3 {
+			power-domain@RK3399_PD_TCPD0 {
+				reg = <RK3399_PD_TCPD0>;
+				clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+					 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_TCPD1 {
+				reg = <RK3399_PD_TCPD1>;
+				clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+					 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_USB3 {
 				reg = <RK3399_PD_USB3>;
 				clocks = <&cru ACLK_USB3>;
 				pm_qos = <&qos_usb_otg0>,
 					 <&qos_usb_otg1>;
+				#power-domain-cells = <0>;
 			};
-			pd_vio@RK3399_PD_VIO {
+			power-domain@RK3399_PD_VIO {
 				reg = <RK3399_PD_VIO>;
+				#power-domain-cells = <1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				pd_hdcp@RK3399_PD_HDCP {
+				power-domain@RK3399_PD_HDCP {
 					reg = <RK3399_PD_HDCP>;
 					clocks = <&cru ACLK_HDCP>,
 						 <&cru HCLK_HDCP>,
 						 <&cru PCLK_HDCP>;
 					pm_qos = <&qos_hdcp>;
+					#power-domain-cells = <0>;
 				};
-				pd_isp0@RK3399_PD_ISP0 {
+				power-domain@RK3399_PD_ISP0 {
 					reg = <RK3399_PD_ISP0>;
 					clocks = <&cru ACLK_ISP0>,
 						 <&cru HCLK_ISP0>;
 					pm_qos = <&qos_isp0_m0>,
 						 <&qos_isp0_m1>;
+					#power-domain-cells = <0>;
 				};
-				pd_isp1@RK3399_PD_ISP1 {
+				power-domain@RK3399_PD_ISP1 {
 					reg = <RK3399_PD_ISP1>;
 					clocks = <&cru ACLK_ISP1>,
 						 <&cru HCLK_ISP1>;
 					pm_qos = <&qos_isp1_m0>,
 						 <&qos_isp1_m1>;
+					#power-domain-cells = <0>;
 				};
-				pd_tcpc0@RK3399_PD_TCPC0 {
-					reg = <RK3399_PD_TCPD0>;
-					clocks = <&cru SCLK_UPHY0_TCPDCORE>,
-						 <&cru SCLK_UPHY0_TCPDPHY_REF>;
-				};
-				pd_tcpc1@RK3399_PD_TCPC1 {
-					reg = <RK3399_PD_TCPD1>;
-					clocks = <&cru SCLK_UPHY1_TCPDCORE>,
-						 <&cru SCLK_UPHY1_TCPDPHY_REF>;
-				};
-				pd_vo@RK3399_PD_VO {
+				power-domain@RK3399_PD_VO {
 					reg = <RK3399_PD_VO>;
+					#power-domain-cells = <1>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					pd_vopb@RK3399_PD_VOPB {
+					power-domain@RK3399_PD_VOPB {
 						reg = <RK3399_PD_VOPB>;
 						clocks = <&cru ACLK_VOP0>,
 							 <&cru HCLK_VOP0>;
 						pm_qos = <&qos_vop_big_r>,
 							 <&qos_vop_big_w>;
+						#power-domain-cells = <0>;
 					};
-					pd_vopl@RK3399_PD_VOPL {
+					power-domain@RK3399_PD_VOPL {
 						reg = <RK3399_PD_VOPL>;
 						clocks = <&cru ACLK_VOP1>,
 							 <&cru HCLK_VOP1>;
 						pm_qos = <&qos_vop_little>;
+						#power-domain-cells = <0>;
 					};
 				};
 			};
@@ -1124,8 +1117,6 @@
 	pmugrf: syscon@ff320000 {
 		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xff320000 0x0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
 		pmu_io_domains: io-domains {
 			compatible = "rockchip,rk3399-pmu-io-voltage-domain";
@@ -1211,7 +1202,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm0_pin>;
 		clocks = <&pmucru PCLK_RKPWM_PMU>;
-		clock-names = "pwm";
 		status = "disabled";
 	};
 
@@ -1222,7 +1212,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm1_pin>;
 		clocks = <&pmucru PCLK_RKPWM_PMU>;
-		clock-names = "pwm";
 		status = "disabled";
 	};
 
@@ -1233,7 +1222,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm2_pin>;
 		clocks = <&pmucru PCLK_RKPWM_PMU>;
-		clock-names = "pwm";
 		status = "disabled";
 	};
 
@@ -1244,7 +1232,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm3a_pin>;
 		clocks = <&pmucru PCLK_RKPWM_PMU>;
-		clock-names = "pwm";
 		status = "disabled";
 	};
 
@@ -1271,6 +1258,17 @@
 		power-domains = <&power RK3399_PD_VCODEC>;
 	};
 
+	vdec: video-codec@ff660000 {
+		compatible = "rockchip,rk3399-vdec";
+		reg = <0x0 0xff660000 0x0 0x400>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
+			 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
+		clock-names = "axi", "ahb", "cabac", "core";
+		iommus = <&vdec_mmu>;
+		power-domains = <&power RK3399_PD_VDU>;
+	};
+
 	vdec_mmu: iommu@ff660480 {
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
@@ -1278,8 +1276,8 @@
 		interrupt-names = "vdec_mmu";
 		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>;
 		clock-names = "aclk", "iface";
+		power-domains = <&power RK3399_PD_VDU>;
 		#iommu-cells = <0>;
-		status = "disabled";
 	};
 
 	iep_mmu: iommu@ff670800 {
@@ -1336,6 +1334,28 @@
 		};
 	};
 
+	dmac_bus: dma-controller@ff6d0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff6d0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
+		#dma-cells = <1>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC0_PERILP>;
+		clock-names = "apb_pclk";
+	};
+
+	dmac_peri: dma-controller@ff6e0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff6e0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
+		#dma-cells = <1>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC1_PERILP>;
+		clock-names = "apb_pclk";
+	};
+
 	pmucru: pmu-clock-controller@ff750000 {
 		compatible = "rockchip,rk3399-pmucru";
 		reg = <0x0 0xff750000 0x0 0x1000>;
@@ -1387,7 +1407,18 @@
 			status = "disabled";
 		};
 
-		u2phy0: usb2-phy@e450 {
+		mipi_dphy_rx0: mipi-dphy-rx0 {
+			compatible = "rockchip,rk3399-mipi-dphy-rx0";
+			clocks = <&cru SCLK_MIPIDPHY_REF>,
+				 <&cru SCLK_DPHY_RX0_CFG>,
+				 <&cru PCLK_VIO_GRF>;
+			clock-names = "dphy-ref", "dphy-cfg", "grf";
+			power-domains = <&power RK3399_PD_VIO>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		u2phy0: usb2phy@e450 {
 			compatible = "rockchip,rk3399-usb2phy";
 			reg = <0xe450 0x10>;
 			clocks = <&cru SCLK_USB2PHY0_REF>;
@@ -1414,7 +1445,7 @@
 			};
 		};
 
-		u2phy1: usb2-phy@e460 {
+		u2phy1: usb2phy@e460 {
 			compatible = "rockchip,rk3399-usb2phy";
 			reg = <0xe460 0x10>;
 			clocks = <&cru SCLK_USB2PHY1_REF>;
@@ -1513,7 +1544,7 @@
 	};
 
 	watchdog@ff848000 {
-		compatible = "snps,dw-wdt";
+		compatible = "rockchip,rk3399-wdt", "snps,dw-wdt";
 		reg = <0x0 0xff848000 0x0 0x100>;
 		clocks = <&cru PCLK_WDT>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1700,6 +1731,32 @@
 		status = "disabled";
 	};
 
+	isp0: isp0@ff910000 {
+		compatible = "rockchip,rk3399-cif-isp";
+		reg = <0x0 0xff910000 0x0 0x4000>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_ISP0>,
+			 <&cru ACLK_ISP0_WRAPPER>,
+			 <&cru HCLK_ISP0_WRAPPER>;
+		clock-names = "isp", "aclk", "hclk";
+		iommus = <&isp0_mmu>;
+		phys = <&mipi_dphy_rx0>;
+		phy-names = "dphy";
+		power-domains = <&power RK3399_PD_ISP0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
 	isp0_mmu: iommu@ff914000 {
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
@@ -1883,10 +1940,10 @@
 	gpu: gpu@ff9a0000 {
 		compatible = "rockchip,rk3399-mali", "arm,mali-t860";
 		reg = <0x0 0xff9a0000 0x0 0x10000>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "gpu", "job", "mmu";
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&cru ACLK_GPU>;
 		#cooling-cells = <2>;
 		power-domains = <&power RK3399_PD_GPU>;
@@ -2317,7 +2374,7 @@
 			};
 		};
 
-		sleep {
+		suspend {
 			ap_pwroff: ap-pwroff {
 				rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
 			};
@@ -2475,7 +2532,7 @@
 		};
 
 		tsadc {
-			otp_gpio: otp-gpio {
+			otp_pin: otp-pin {
 				rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 
diff --git a/arch/arm/dts/rk3399pro-vmarc-som.dtsi b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
index 5d087be..e1cb426 100644
--- a/arch/arm/dts/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
@@ -12,6 +12,11 @@
 / {
 	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
 
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+	};
+
 	vcc3v3_pcie: vcc-pcie-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -324,7 +329,6 @@
 
 &pcie0 {
 	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-	max-link-speed = <2>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";
@@ -353,6 +357,12 @@
 		};
 	};
 
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	vbus_host {
 		usb1_en_oc: usb1-en-oc {
 			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;