Merge branch 'master' of git://git.denx.de/u-boot-mmc
diff --git a/README b/README
index 216f0c7..7cb7c4f 100644
--- a/README
+++ b/README
@@ -1525,6 +1525,16 @@
 		this to the maximum filesize (in bytes) for the buffer.
 		Default is 4 MiB if undefined.
 
+		DFU_DEFAULT_POLL_TIMEOUT
+		Poll timeout [ms], is the timeout a device can send to the
+		host. The host must wait for this timeout before sending
+		a subsequent DFU_GET_STATUS request to the device.
+
+		DFU_MANIFEST_POLL_TIMEOUT
+		Poll timeout [ms], which the device sends to the host when
+		entering dfuMANIFEST state. Host waits this timeout, before
+		sending again an USB request to the device.
+
 - Journaling Flash filesystem support:
 		CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
 		CONFIG_JFFS2_NAND_DEV
diff --git a/common/Makefile b/common/Makefile
index e2ff0cb..cecd81a 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -159,6 +159,9 @@
 obj-$(CONFIG_CMD_UBIFS) += cmd_ubifs.o
 obj-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
 obj-$(CONFIG_CMD_UNZIP) += cmd_unzip.o
+ifdef CONFIG_LZMA
+obj-$(CONFIG_CMD_LZMADEC) += cmd_lzmadec.o
+endif
 ifdef CONFIG_CMD_USB
 obj-y += cmd_usb.o
 obj-y += usb.o usb_hub.o
diff --git a/common/cmd_lzmadec.c b/common/cmd_lzmadec.c
new file mode 100644
index 0000000..7b0b3fd
--- /dev/null
+++ b/common/cmd_lzmadec.c
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2013 Patrice Bouchand <pbfwdlist_gmail_com>
+ * lzma uncompress command in Uboot
+ *
+ * made from existing cmd_unzip.c file of Uboot
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+
+#include <lzma/LzmaTools.h>
+
+static int do_lzmadec(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	unsigned long src, dst;
+	unsigned long src_len = ~0UL, dst_len = ~0UL;
+	int ret;
+
+	switch (argc) {
+	case 4:
+		dst_len = simple_strtoul(argv[3], NULL, 16);
+		/* fall through */
+	case 3:
+		src = simple_strtoul(argv[1], NULL, 16);
+		dst = simple_strtoul(argv[2], NULL, 16);
+		break;
+	default:
+		return CMD_RET_USAGE;
+	}
+
+	ret = lzmaBuffToBuffDecompress(map_sysmem(dst, dst_len), &src_len,
+				       map_sysmem(src, 0), dst_len);
+
+	if (ret != SZ_OK)
+		return 1;
+	printf("Uncompressed size: %ld = 0x%lX\n", src_len, src_len);
+	setenv_hex("filesize", src_len);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	lzmadec,    4,    1,    do_lzmadec,
+	"lzma uncompress a memory region",
+	"srcaddr dstaddr [dstsize]"
+);
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index 07011e9..f94c412 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -126,6 +126,28 @@
 	return ret;
 }
 
+int dfu_flush(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
+{
+	int ret = 0;
+
+	if (dfu->flush_medium)
+		ret = dfu->flush_medium(dfu);
+
+	printf("\nDFU complete CRC32: 0x%08x\n", dfu->crc);
+
+	/* clear everything */
+	dfu_free_buf();
+	dfu->crc = 0;
+	dfu->offset = 0;
+	dfu->i_blk_seq_num = 0;
+	dfu->i_buf_start = dfu_buf;
+	dfu->i_buf_end = dfu_buf;
+	dfu->i_buf = dfu->i_buf_start;
+	dfu->inited = 0;
+
+	return ret;
+}
+
 int dfu_write(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
 {
 	int ret = 0;
@@ -196,26 +218,6 @@
 			ret = tret;
 	}
 
-	/* end? */
-	if (size == 0) {
-		/* Now try and flush to the medium if needed. */
-		if (dfu->flush_medium)
-			ret = dfu->flush_medium(dfu);
-		printf("\nDFU complete CRC32: 0x%08x\n", dfu->crc);
-
-		/* clear everything */
-		dfu_free_buf();
-		dfu->crc = 0;
-		dfu->offset = 0;
-		dfu->i_blk_seq_num = 0;
-		dfu->i_buf_start = dfu_buf;
-		dfu->i_buf_end = dfu_buf;
-		dfu->i_buf = dfu->i_buf_start;
-
-		dfu->inited = 0;
-
-	}
-
 	return ret = 0 ? size : ret;
 }
 
diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c
index a045864..de75ff1 100644
--- a/drivers/usb/gadget/f_dfu.c
+++ b/drivers/usb/gadget/f_dfu.c
@@ -164,9 +164,14 @@
 
 	dfu_write(dfu_get_entity(f_dfu->altsetting), req->buf,
 		  req->length, f_dfu->blk_seq_num);
+}
 
-	if (req->length == 0)
-		puts("DOWNLOAD ... OK\nCtrl+C to exit ...\n");
+static void dnload_request_flush(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_dfu *f_dfu = req->context;
+
+	dfu_flush(dfu_get_entity(f_dfu->altsetting), req->buf,
+		  req->length, f_dfu->blk_seq_num);
 }
 
 static void handle_getstatus(struct usb_request *req)
@@ -174,19 +179,22 @@
 	struct dfu_status *dstat = (struct dfu_status *)req->buf;
 	struct f_dfu *f_dfu = req->context;
 
+	dfu_set_poll_timeout(dstat, 0);
+
 	switch (f_dfu->dfu_state) {
 	case DFU_STATE_dfuDNLOAD_SYNC:
 	case DFU_STATE_dfuDNBUSY:
 		f_dfu->dfu_state = DFU_STATE_dfuDNLOAD_IDLE;
 		break;
 	case DFU_STATE_dfuMANIFEST_SYNC:
+		f_dfu->dfu_state = DFU_STATE_dfuMANIFEST;
 		break;
+	case DFU_STATE_dfuMANIFEST:
+		dfu_set_poll_timeout(dstat, DFU_MANIFEST_POLL_TIMEOUT);
 	default:
 		break;
 	}
 
-	dfu_set_poll_timeout(dstat, 0);
-
 	if (f_dfu->poll_timeout)
 		if (!(f_dfu->blk_seq_num %
 		      (dfu_get_buf_size() / DFU_USB_BUFSIZ)))
@@ -446,10 +454,11 @@
 	switch (ctrl->bRequest) {
 	case USB_REQ_DFU_GETSTATUS:
 		/* We're MainfestationTolerant */
-		f_dfu->dfu_state = DFU_STATE_dfuIDLE;
+		f_dfu->dfu_state = DFU_STATE_dfuMANIFEST;
 		handle_getstatus(req);
 		f_dfu->blk_seq_num = 0;
 		value = RET_STAT_LEN;
+		req->complete = dnload_request_flush;
 		break;
 	case USB_REQ_DFU_GETSTATE:
 		handle_getstate(req);
@@ -463,6 +472,33 @@
 	return value;
 }
 
+static int state_dfu_manifest(struct f_dfu *f_dfu,
+			      const struct usb_ctrlrequest *ctrl,
+			      struct usb_gadget *gadget,
+			      struct usb_request *req)
+{
+	int value = 0;
+
+	switch (ctrl->bRequest) {
+	case USB_REQ_DFU_GETSTATUS:
+		/* We're MainfestationTolerant */
+		f_dfu->dfu_state = DFU_STATE_dfuIDLE;
+		handle_getstatus(req);
+		f_dfu->blk_seq_num = 0;
+		value = RET_STAT_LEN;
+		puts("DOWNLOAD ... OK\nCtrl+C to exit ...\n");
+		break;
+	case USB_REQ_DFU_GETSTATE:
+		handle_getstate(req);
+		break;
+	default:
+		f_dfu->dfu_state = DFU_STATE_dfuERROR;
+		value = RET_STALL;
+		break;
+	}
+	return value;
+}
+
 static int state_dfu_upload_idle(struct f_dfu *f_dfu,
 				 const struct usb_ctrlrequest *ctrl,
 				 struct usb_gadget *gadget,
@@ -539,7 +575,7 @@
 	state_dfu_dnbusy,        /* DFU_STATE_dfuDNBUSY */
 	state_dfu_dnload_idle,   /* DFU_STATE_dfuDNLOAD_IDLE */
 	state_dfu_manifest_sync, /* DFU_STATE_dfuMANIFEST_SYNC */
-	NULL,                    /* DFU_STATE_dfuMANIFEST */
+	state_dfu_manifest,	 /* DFU_STATE_dfuMANIFEST */
 	NULL,                    /* DFU_STATE_dfuMANIFEST_WAIT_RST */
 	state_dfu_upload_idle,   /* DFU_STATE_dfuUPLOAD_IDLE */
 	state_dfu_error          /* DFU_STATE_dfuERROR */
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 04171bd..fa62cb6 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -169,4 +169,6 @@
 
 #define CONFIG_TPM_TIS_SANDBOX
 
+#define CONFIG_CMD_LZMADEC
+
 #endif
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 98b6e72..721c4e6 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -265,6 +265,7 @@
 #define CONFIG_DFU_NAND
 #define CONFIG_CMD_DFU
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(1 << 20)
+#define DFU_MANIFEST_POLL_TIMEOUT	25000
 
 #endif /* CONFIG_SPL_BUILD */
 
diff --git a/include/dfu.h b/include/dfu.h
index f973426..6c71ecb 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -80,6 +80,9 @@
 #ifndef DFU_DEFAULT_POLL_TIMEOUT
 #define DFU_DEFAULT_POLL_TIMEOUT 0
 #endif
+#ifndef DFU_MANIFEST_POLL_TIMEOUT
+#define DFU_MANIFEST_POLL_TIMEOUT	DFU_DEFAULT_POLL_TIMEOUT
+#endif
 
 struct dfu_entity {
 	char			name[DFU_NAME_SIZE];
@@ -138,6 +141,7 @@
 
 int dfu_read(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
 int dfu_write(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
+int dfu_flush(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
 /* Device specific */
 #ifdef CONFIG_DFU_MMC
 extern int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s);
diff --git a/tools/patman/README b/tools/patman/README
index 59f1776..b3aba13 100644
--- a/tools/patman/README
+++ b/tools/patman/README
@@ -217,8 +217,10 @@
 	to update the log there and then, knowing that the script will
 	do the rest.
 
- Cc: Their Name <email>
-	This copies a single patch to another email address.
+Patch-cc: Their Name <email>
+	This copies a single patch to another email address. Note that the
+	Cc: used by git send-email is ignored by patman, but will be
+	interpreted by git send-email if you use it.
 
 Series-process-log: sort, uniq
 	This tells patman to sort and/or uniq the change logs. It is
@@ -246,8 +248,9 @@
 
 Once the patches are created, patman sends them using git send-email. The
 whole series is sent to the recipients in Series-to: and Series-cc.
-You can Cc individual patches to other people with the Cc: tag. Tags in the
-subject are also picked up to Cc patches. For example, a commit like this:
+You can Cc individual patches to other people with the Patch-cc: tag. Tags
+in the subject are also picked up to Cc patches. For example, a commit like
+this:
 
 >>>>
 commit 10212537b85ff9b6e09c82045127522c0f0db981
@@ -258,16 +261,16 @@
 
     This should make sending out e-mails to the right people easier.
 
-    Cc: sandbox, mikef, ag
-    Cc: afleming
+    Patch-cc: sandbox, mikef, ag
+    Patch-cc: afleming
 <<<<
 
 will create a patch which is copied to x86, arm, sandbox, mikef, ag and
 afleming.
 
-If you have a cover letter it will get sent to the union of the CC lists of
-all of the other patches. If you want to sent it to additional people you
-can add a tag:
+If you have a cover letter it will get sent to the union of the Patch-cc
+lists of all of the other patches. If you want to sent it to additional
+people you can add a tag:
 
 Cover-letter-cc: <list of addresses>
 
diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py
index 684204c..c4017e0 100644
--- a/tools/patman/patchstream.py
+++ b/tools/patman/patchstream.py
@@ -36,7 +36,7 @@
 re_commit_tag = re.compile('^Commit-([a-z-]*): *(.*)')
 
 # Commit tags that we want to collect and keep
-re_tag = re.compile('^(Tested-by|Acked-by|Reviewed-by|Cc): (.*)')
+re_tag = re.compile('^(Tested-by|Acked-by|Reviewed-by|Patch-cc): (.*)')
 
 # The start of a new commit in the git log
 re_commit = re.compile('^commit ([0-9a-f]*)$')
@@ -267,7 +267,7 @@
             if (tag_match.group(1) == 'Tested-by' and
                     tag_match.group(2).find(os.getenv('USER') + '@') != -1):
                 self.warn.append("Ignoring %s" % line)
-            elif tag_match.group(1) == 'Cc':
+            elif tag_match.group(1) == 'Patch-cc':
                 self.commit.AddCc(tag_match.group(2).split(','))
             else:
                 self.tags.append(line);