x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support
This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM,
installed on the congatec Qseven 2.0 evaluation carrier board
(conga-QEVAL).
Its port is very similar to the MinnowboardMAX port and also uses
the Intel FSP as described in doc/README.x86.
Currently supported are the following interfaces / devices:
- UART (via Winbond legacy SuperIO chip on carrier board)
- Ethernet (PCIe Intel I210 / E1000)
- SPI including SPI NOR as boot-device
- USB 2.0
- SATA via U-Boot SCSI IF
- eMMC
- Video (HDMI output @ 800x600)
- PCIe
Not supported yet is:
- I2C
- USB 3.0
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/board/congatec/Kconfig b/board/congatec/Kconfig
new file mode 100644
index 0000000..1dc306e
--- /dev/null
+++ b/board/congatec/Kconfig
@@ -0,0 +1,29 @@
+#
+# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+if VENDOR_CONGATEC
+
+choice
+ prompt "Mainboard model"
+ optional
+
+config TARGET_CONGA_QEVAL20_QA3_E3845
+ bool "congatec QEVAL 2.0 & conga-QA3/E3845"
+ help
+ This is the congatec Qseven 2.0 evaluation carrier board
+ (conga-QEVAL) equipped with the conga-QA3/E3845-4G SoM.
+ It contains an Atom E3845 with Ethernet, micro-SD, USB 2,
+ USB 3, SATA, serial console and HDMI 1.3 video out.
+ It requires some binary blobs - see README.x86 for details.
+
+ Note that PCIE_ECAM_BASE is set up by the FSP so the value used
+ by U-Boot matches that value.
+
+endchoice
+
+source "board/congatec/conga-qeval20-qa3-e3845/Kconfig"
+
+endif
diff --git a/board/congatec/conga-qeval20-qa3-e3845/Kconfig b/board/congatec/conga-qeval20-qa3-e3845/Kconfig
new file mode 100644
index 0000000..9f31238
--- /dev/null
+++ b/board/congatec/conga-qeval20-qa3-e3845/Kconfig
@@ -0,0 +1,28 @@
+if TARGET_CONGA_QEVAL20_QA3_E3845
+
+config SYS_BOARD
+ default "conga-qeval20-qa3-e3845"
+
+config SYS_VENDOR
+ default "congatec"
+
+config SYS_SOC
+ default "baytrail"
+
+config SYS_CONFIG_NAME
+ default "conga-qeval20-qa3-e3845"
+
+config SYS_TEXT_BASE
+ default 0xfff00000 if !EFI_STUB
+ default 0x01110000 if EFI_STUB
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select X86_RESET_VECTOR if !EFI_STUB
+ select INTEL_BAYTRAIL
+ select BOARD_ROMSIZE_KB_8192
+
+config PCIE_ECAM_BASE
+ default 0xe0000000
+
+endif
diff --git a/board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS b/board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS
new file mode 100644
index 0000000..5a4d4dc
--- /dev/null
+++ b/board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS
@@ -0,0 +1,7 @@
+congatec EVAL20-QA3-E3845
+M: Stefan Roese <sr@denx.de>
+S: Maintained
+F: board/congatec/conga-qeval20-qa3-e3845
+F: include/configs/conga-qeval20-qa3-e3845.h
+F: configs/conga-qeval20-qa3-e3845_defconfig
+F: arch/x86/dts/conga-qeval20-qa3-e3845.dts
diff --git a/board/congatec/conga-qeval20-qa3-e3845/Makefile b/board/congatec/conga-qeval20-qa3-e3845/Makefile
new file mode 100644
index 0000000..23b8748
--- /dev/null
+++ b/board/congatec/conga-qeval20-qa3-e3845/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2015, Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += conga-qeval20-qa3.o start.o
diff --git a/board/congatec/conga-qeval20-qa3-e3845/conga-qeval20-qa3.c b/board/congatec/conga-qeval20-qa3-e3845/conga-qeval20-qa3.c
new file mode 100644
index 0000000..6a946d5
--- /dev/null
+++ b/board/congatec/conga-qeval20-qa3-e3845/conga-qeval20-qa3.c
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2016 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <winbond_w83627.h>
+#include <asm/gpio.h>
+#include <asm/ibmpc.h>
+#include <asm/pnp_def.h>
+
+int board_early_init_f(void)
+{
+ /*
+ * The FSP enables the BayTrail internal legacy UART (again).
+ * Disable it again, so that the Winbond one can be used.
+ */
+ setup_internal_uart(0);
+
+ /* Enable the legacy UART in the Winbond W83627 Super IO chip */
+ winbond_enable_serial(PNP_DEV(WINBOND_IO_PORT, W83627DHG_SP1),
+ UART0_BASE, UART0_IRQ);
+
+ return 0;
+}
+
+int arch_early_init_r(void)
+{
+ return 0;
+}
diff --git a/board/congatec/conga-qeval20-qa3-e3845/start.S b/board/congatec/conga-qeval20-qa3-e3845/start.S
new file mode 100644
index 0000000..2c941a4
--- /dev/null
+++ b/board/congatec/conga-qeval20-qa3-e3845/start.S
@@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2015, Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+.globl early_board_init
+early_board_init:
+ jmp early_board_init_ret