cmd: bind: allow to bind driver with driver data

Initial implementation invokes device_bind_with_driver_data()
with driver_data parameter equal to 0.
For driver with driver data, the bind command can't bind
correctly this driver or even worse causes data abort as shown below:

As example, for debug purpose on STM32MP1 platform, ethernet
(dwc_eth_qos.c) driver needed to be unbinded/binded.
This driver is using driver data:

static const struct udevice_id eqos_ids[] = {
    {
        .compatible = "nvidia,tegra186-eqos",
        .data = (ulong)&eqos_tegra186_config
    },
    {
        .compatible = "snps,dwmac-4.20a",
        .data = (ulong)&eqos_stm32_config
    },

    { }
};

After unbinding/binding this driver and probing it (with the dhcp command),
we got a prefetch abort as below:

STM32MP> unbind eth ethernet@5800a000
STM32MP> bind /soc/ethernet@5800a000 eth_eqos
STM32MP> dhcp
prefetch abort
pc : [<4310801c>]          lr : [<ffc8f4ad>]
reloc pc : [<035ba01c>]    lr : [<c01414ad>]
sp : fdaf19b0  ip : ffcea83c     fp : 00000001
r10: ffcfd4a0  r9 : fdaffed0     r8 : 00000000
r7 : ffcff304  r6 : fdc63220     r5 : 00000000  r4 : fdc5b108
r3 : 43108020  r2 : 00003d39     r1 : ffcea544  r0 : fdc63220
Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
Code: data abort
pc : [<ffc4f9c0>]          lr : [<ffc4f9ad>]
reloc pc : [<c01019c0>]    lr : [<c01019ad>]
sp : fdaf18b8  ip : 00000000     fp : 00000001
r10: ffcd69b2  r9 : fdaffed0     r8 : ffcd69aa
r7 : 00000000  r6 : 00000008     r5 : 4310801c  r4 : fffffffc
r3 : 00000001  r2 : 00000028     r1 : 00000000  r0 : 00000006
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32 (T)
Code: 2f00 d1e9 2c00 dce9 (f855) 2024
Resetting CPU ...

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
1 file changed