* Patches by Yuli Barcohen, 13 Jul 2003:
- Correct flash and JFFS2 support for MPC8260ADS
- fix PVR values and clock generation for PowerQUICC II family
(8270/8275/8280)
* Patch by Bernhard Kuhn, 08 Jul 2003:
- add support for M68K targets
* Patch by Ken Chou, 3 Jul:
- Fix PCI config table for A3000
- Fix iobase for natsemi.c
(PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
* Allow to enable "slow" POST routines by key press on power-on
* Fix temperature dependend switching of LCD backlight on LWMON
* Tweak output format for LWMON
diff --git a/cpu/mpc8260/commproc.c b/cpu/mpc8260/commproc.c
index c523ee4..72cceb3 100644
--- a/cpu/mpc8260/commproc.c
+++ b/cpu/mpc8260/commproc.c
@@ -111,9 +111,9 @@
* to port numbers). Documentation uses 1-based numbering.
*/
#define BRG_INT_CLK gd->brg_clk
-#define BRG_UART_CLK ((BRG_INT_CLK + 15) / 16)
+#define BRG_UART_CLK (BRG_INT_CLK / 16)
-/* This function is used by UARTS, or anything else that uses a 16x
+/* This function is used by UARTs, or anything else that uses a 16x
* oversampled clock.
*/
void
@@ -123,9 +123,10 @@
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile uint *bp;
+ uint cd = BRG_UART_CLK / rate;
- /* This is good enough to get SMCs running.....
- */
+ if ((BRG_UART_CLK % rate) < (rate / 2))
+ cd--;
if (brg < 4) {
bp = (uint *)&immr->im_brgc1;
}
@@ -134,7 +135,7 @@
brg -= 4;
}
bp += brg;
- *bp = (((((BRG_UART_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
+ *bp = (cd << 1) | CPM_BRG_EN;
}
/* This function is used to set high speed synchronous baud rate
diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c
index 7662fc6..2736702 100644
--- a/cpu/mpc8260/cpu.c
+++ b/cpu/mpc8260/cpu.c
@@ -22,7 +22,7 @@
*/
/*
- * CPU specific code for the MPC8255 / MPC8260 CPUs
+ * CPU specific code for the MPC825x / MPC826x / MPC827x / MPC828x
*
* written or collected and sometimes rewritten by
* Magnus Damm <damm@bitsmart.com>
@@ -35,6 +35,9 @@
*
* added 8260 masks by
* Marius Groeger <mag@sysgo.de>
+ *
+ * added HiP7 (8270/8275/8280) processors support by
+ * Yuli Barcohen <yuli@arabellasw.com>
*/
#include <common.h>
@@ -56,15 +59,27 @@
puts ("CPU: ");
- if (((pvr >> 16) & 0xff) != 0x81)
+ switch (pvr) {
+ case PVR_8260:
+ case PVR_8260_HIP3:
+ k = 3;
+ break;
+ case PVR_8260_HIP4:
+ k = 4;
+ break;
+ case PVR_8260_HIP7:
+ k = 7;
+ break;
+ default:
return -1; /* whoops! not an MPC8260 */
+ }
rev = pvr & 0xff;
immr = immap->im_memctl.memc_immr;
if ((immr & IMMR_ISB_MSK) != CFG_IMMR)
return -1; /* whoops! someone moved the IMMR */
- printf (CPU_ID_STR " (Rev %02x, Mask ", rev);
+ printf (CPU_ID_STR " (HiP%d Rev %02x, Mask ", k, rev);
/*
* the bottom 16 bits of the immr are the Part Number and Mask Number
@@ -104,6 +119,12 @@
case 0x0062:
printf ("B.1 4K25A");
break;
+ case 0x0A00:
+ printf ("0.0 0K49M");
+ break;
+ case 0x0A01:
+ printf ("0.1 1K49M");
+ break;
default:
printf ("unknown [immr=0x%04x,k=0x%04x]", m, k);
break;
diff --git a/cpu/mpc8260/speed.c b/cpu/mpc8260/speed.c
index 1f53c4f..6a3176a 100644
--- a/cpu/mpc8260/speed.c
+++ b/cpu/mpc8260/speed.c
@@ -120,15 +120,19 @@
scmr = immap->im_clkrst.car_scmr;
corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT;
- busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT;
- cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
- plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
- pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
-
cp = &corecnf_tab[corecnf];
- gd->vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1);
+ busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT;
+ cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
+ if (get_pvr () == PVR_8260_HIP7) { /* HiP7 */
+ pllmf = (scmr & SCMR_PLLMF_MSKH7) >> SCMR_PLLMF_SHIFT;
+ gd->vco_out = clkin * (pllmf + 1);
+ } else { /* HiP3, HiP4 */
+ pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
+ plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
+ gd->vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1);
+ }
#if 0
if (gd->vco_out / (busdf + 1) != clkin) {
/* aaarrrggghhh!!! */
diff --git a/cpu/mpc8xx/lcd.c b/cpu/mpc8xx/lcd.c
index 9f4b210..ec9fbfc 100644
--- a/cpu/mpc8xx/lcd.c
+++ b/cpu/mpc8xx/lcd.c
@@ -25,6 +25,8 @@
/* ** HEADER FILES */
/************************************************************************/
+/* #define DEBUG */
+
#include <config.h>
#include <common.h>
#include <watchdog.h>
@@ -1057,6 +1059,23 @@
/* Now turn on LCD_ON */
immr->im_cpm.cp_pbdat |= 0x00001000;
#endif
+#ifdef CONFIG_RRVISION
+ debug ("PC4->Output(1): enable LVDS\n");
+ debug ("PC5->Output(0): disable PAL clock\n");
+ immr->im_ioport.iop_pddir |= 0x1000;
+ immr->im_ioport.iop_pcpar &= ~(0x0C00);
+ immr->im_ioport.iop_pcdir |= 0x0C00 ;
+ immr->im_ioport.iop_pcdat |= 0x0800 ;
+ immr->im_ioport.iop_pcdat &= ~(0x0400);
+ debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
+ immr->im_ioport.iop_pdpar,
+ immr->im_ioport.iop_pddir,
+ immr->im_ioport.iop_pddat);
+ debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
+ immr->im_ioport.iop_pcpar,
+ immr->im_ioport.iop_pcdir,
+ immr->im_ioport.iop_pcdat);
+#endif
}
/*----------------------------------------------------------------------*/
diff --git a/cpu/mpc8xx/video.c b/cpu/mpc8xx/video.c
index 40e65d3..1887cfe 100644
--- a/cpu/mpc8xx/video.c
+++ b/cpu/mpc8xx/video.c
@@ -23,7 +23,7 @@
* MA 02111-1307 USA
*/
-/* #define DEBUG */
+/* #define DEBUG */
/************************************************************************/
/* ** HEADER FILES */
@@ -86,6 +86,14 @@
#define VIDEO_I2C_ADDR CONFIG_VIDEO_ENCODER_AD7177_ADDR
#endif
+#ifdef CONFIG_VIDEO_ENCODER_AD7179
+
+#include <video_ad7179.h> /* Sets encoder data, mode, and visible and active area */
+
+#define VIDEO_I2C 1
+#define VIDEO_I2C_ADDR CONFIG_VIDEO_ENCODER_AD7179_ADDR
+#endif
+
/************************************************************************/
/* ** VIDEO MODE CONSTANTS */
/************************************************************************/
@@ -155,7 +163,7 @@
/* ** CONSOLE CONSTANTS */
/************************************************************************/
-#ifdef CONFIG_VIDEO_LOGO
+#ifdef CONFIG_VIDEO_LOGO
#define CONSOLE_ROWS ((VIDEO_ROWS - VIDEO_LOGO_HEIGHT) / VIDEO_FONT_HEIGHT)
#define VIDEO_LOGO_SKIP (VIDEO_COLS - VIDEO_LOGO_WIDTH)
#else
@@ -163,11 +171,11 @@
#endif
#define CONSOLE_COLS (VIDEO_COLS / VIDEO_FONT_WIDTH)
-#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * VIDEO_LINE_LEN)
+#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * VIDEO_LINE_LEN)
#define CONSOLE_ROW_FIRST (video_console_address)
-#define CONSOLE_ROW_SECOND (video_console_address + CONSOLE_ROW_SIZE)
+#define CONSOLE_ROW_SECOND (video_console_address + CONSOLE_ROW_SIZE)
#define CONSOLE_ROW_LAST (video_console_address + CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS)
+#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS)
#define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE)
/*
@@ -287,8 +295,8 @@
/* Calculate YUV values (0-255) from RGB beetween 0-100 */
YUYV.Y1 = YUYV.Y2 = 209 * (pR + pG + pB) / 300 + 16;
- YUYV.U = pR - (pG * 3 / 4) - (pB / 4) + 128;
- YUYV.V = pB - (pR / 4) - (pG * 3 / 4) + 128;
+ YUYV.U = pR - (pG * 3 / 4) - (pB / 4) + 128;
+ YUYV.V = pB - (pR / 4) - (pG * 3 / 4) + 128;
return *ret;
#endif
#ifdef VIDEO_MODE_RGB
@@ -473,6 +481,7 @@
/* ** VIDEO CONTROLLER LOW-LEVEL FUNCTIONS */
/************************************************************************/
+#if !defined(CONFIG_RRVISION)
static void video_mode_dupefield (VRAM * source, VRAM * dest, int entries)
{
int i;
@@ -485,6 +494,7 @@
dest[0].lcyc++; /* Add a cycle to the first entry */
dest[entries - 1].lst = 1; /* Set end of ram entries */
}
+#endif
static void inline video_mode_addentry (VRAM * vr,
int Hx, int Vx, int Fx, int Bx,
@@ -501,7 +511,7 @@
vr->lst = LST;
}
-#define ADDENTRY(a,b,c,d,e,f,g,h,i) video_mode_addentry(&vr[entry++],a,b,c,d,e,f,g,h,i)
+#define ADDENTRY(a,b,c,d,e,f,g,h,i) video_mode_addentry(&vr[entry++],a,b,c,d,e,f,g,h,i)
static int video_mode_generate (void)
{
@@ -539,9 +549,12 @@
Y1 = video_panning_value_y & 0xfffe;
Y2 = DY - Y1;
+ debug("X1=%d, X2=%d, Y1=%d, Y2=%d, DX=%d, DY=%d VIDEO_COLS=%d \n",
+ X1, X2, Y1, Y2, DX, DY, VIDEO_COLS);
+
#ifdef VIDEO_MODE_NTSC
/*
- * Hx Vx Fx Bx VDS INT LCYC LP LST
+ * Hx Vx Fx Bx VDS INT LCYC LP LST
*
* Retrace blanking
*/
@@ -641,6 +654,73 @@
#endif
#ifdef VIDEO_MODE_PAL
+
+#if defined(CONFIG_RRVISION)
+
+#define HPW 160 /* horizontal pulse width (was 139) */
+#define VPW 2 /* vertical pulse width */
+#define HBP 104 /* horizontal back porch (was 112) */
+#define VBP 19 /* vertical back porch (was 19) */
+#define VID_R 240 /* number of rows */
+
+ debug ("[VIDEO CTRL] Starting to add controller entries...");
+/*
+ * Even field
+ */
+ ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
+ ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
+
+ ADDENTRY (0, 0, 0, 3, 1, 0, VPW, 1, 0);
+ ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+
+ ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+/*
+ * Active area
+ */
+ ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
+
+ ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
+/*
+ * Odd field
+ */
+ ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
+ ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
+
+ ADDENTRY (0, 0, 0, 3, 1, 0, VPW+1, 1, 0);
+ ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+
+ ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
+/*
+ * Active area
+ */
+ ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
+
+ ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
+ ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
+ ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
+
+ debug ("done\n");
+
+#else /* !CONFIG_RRVISION */
+
/*
* Hx Vx Fx Bx VDS INT LCYC LP LST
*
@@ -692,7 +772,9 @@
* one more cycle loop and a last identifier)
*/
video_mode_dupefield (vr, &vr[entry], entry);
-#endif
+#endif /* CONFIG_RRVISION */
+
+#endif /* VIDEO_MODE_PAL */
/* See what FIFO are we using */
fifo = GETBIT (immap->im_vid.vid_vsr, VIDEO_VSR_CAS);
@@ -829,26 +911,19 @@
debug ("[VIDEO CTRL] Turning on video port led...\n");
SETBIT (*(int *) BCSR4, VIDEO_BCSR4_VIDLED_BIT, 0);
#endif
-
#ifdef CONFIG_RRVISION
- /* enable clock: set PD3 to VCLK, PC5 to HIGH */
- {
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
-
- debug ("PDPAR=%04X PDDIR=%04X PDDAT=%04X\n",
- immr->im_ioport.iop_pdpar,
- immr->im_ioport.iop_pddir,
- immr->im_ioport.iop_pddat);
-
- debug ("[RRvision] PC5 -> Output (1): ");
- immr->im_ioport.iop_pcpar &= ~(0x0400);
- immr->im_ioport.iop_pcdir |= 0x0400 ;
- immr->im_ioport.iop_pcdat |= 0x0400 ;
- debug ("PCPAR=%04X PCDIR=%04X PCDAT=%04X\n",
- immr->im_ioport.iop_pcpar,
- immr->im_ioport.iop_pcdir,
- immr->im_ioport.iop_pcdat);
- }
+ debug ("PC5->Output(1): enable PAL clock");
+ immap->im_ioport.iop_pcpar &= ~(0x0400);
+ immap->im_ioport.iop_pcdir |= 0x0400 ;
+ immap->im_ioport.iop_pcdat |= 0x0400 ;
+ debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
+ immap->im_ioport.iop_pdpar,
+ immap->im_ioport.iop_pddir,
+ immap->im_ioport.iop_pddat);
+ debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
+ immap->im_ioport.iop_pcpar,
+ immap->im_ioport.iop_pcdir,
+ immap->im_ioport.iop_pcdat);
#endif /* CONFIG_RRVISION */
/* Blanking the screen. */