fsl: Change fsl_phy_enet_if to phy_interface_t
The fsl_phy_enet_if enum was, essentially, the phy_interface_t enum.
This meant that drivers which used fsl_phy_enet_if to deal with
PHY interfaces would have to convert between the two (or we would have
to have them mirror each other, and deal with the ensuing maintenance
headache). Instead, we switch all clients of fsl_phy_enet_if over to
phy_interface_t, which should become the standard, anyway.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: Detlev Zundel <dzu@denx.de>
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 0c166fd..520cb90 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -27,8 +27,8 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/mp.h>
-#include <asm/fsl_enet.h>
#include <asm/fsl_serdes.h>
+#include <phy.h>
#if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx))
static int ft_del_cpuhandle(void *blob, int cpuhandle)
@@ -218,27 +218,10 @@
}
#endif
-int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc)
+int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
{
- static const char *fsl_phy_enet_if_str[] = {
- [MII] = "mii",
- [RMII] = "rmii",
- [GMII] = "gmii",
- [RGMII] = "rgmii",
- [RGMII_ID] = "rgmii-id",
- [RGMII_RXID] = "rgmii-rxid",
- [SGMII] = "sgmii",
- [TBI] = "tbi",
- [RTBI] = "rtbi",
- [XAUI] = "xgmii",
- [FSL_ETH_IF_NONE] = "",
- };
-
- if (phyc > ARRAY_SIZE(fsl_phy_enet_if_str))
- return fdt_setprop_string(blob, offset, "phy-connection-type", "");
-
return fdt_setprop_string(blob, offset, "phy-connection-type",
- fsl_phy_enet_if_str[phyc]);
+ phy_string_for_interface(phyc));
}
#ifdef CONFIG_SYS_SRIO
diff --git a/arch/powerpc/include/asm/fsl_enet.h b/arch/powerpc/include/asm/fsl_enet.h
index 1f8f8e4..8227b66 100644
--- a/arch/powerpc/include/asm/fsl_enet.h
+++ b/arch/powerpc/include/asm/fsl_enet.h
@@ -13,20 +13,7 @@
#ifndef __ASM_PPC_FSL_ENET_H
#define __ASM_PPC_FSL_ENET_H
-enum fsl_phy_enet_if {
- MII,
- RMII,
- GMII,
- RGMII,
- RGMII_ID,
- RGMII_RXID,
- RGMII_TXID,
- SGMII,
- TBI,
- RTBI,
- XAUI,
- FSL_ETH_IF_NONE,
-};
+#include <phy.h>
struct tsec_mii_mng {
u32 miimcfg; /* MII management configuration reg */
@@ -38,6 +25,6 @@
u32 ifstat; /* Interface Status Register */
} __attribute__ ((packed));
-int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc);
+int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc);
#endif /* __ASM_PPC_FSL_ENET_H */
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index 0babd26..51d8035 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -16,6 +16,7 @@
#include <mpc83xx.h>
#include <i2c.h>
#include <miiphy.h>
+#include <phy.h>
#if defined(CONFIG_PCI)
#include <pci.h>
#endif
@@ -160,8 +161,9 @@
int i;
for (i = 0; i < ARRAY_SIZE(uec_info); i++)
- uec_info[i].enet_interface_type = RGMII_RXID;
- uec_info[i].speed = 1000;
+ uec_info[i].enet_interface_type =
+ PHY_INTERFACE_MODE_RGMII_RXID;
+ uec_info[i].speed = SPEED_1000;
}
return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info));
}
@@ -398,7 +400,7 @@
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
- RGMII_RXID);
+ PHY_INTERFACE_MODE_RGMII_RXID);
}
#endif
#if defined(CONFIG_HAS_ETH1)
@@ -410,7 +412,7 @@
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
- RGMII_RXID);
+ PHY_INTERFACE_MODE_RGMII_RXID);
}
#endif
}
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index ee1ebd9..650a4fe 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -22,6 +22,7 @@
#include <fdt_support.h>
#include <fsl_esdhc.h>
#include <fsl_mdio.h>
+#include <phy.h>
#include "pci.h"
#include "../common/pq-mds-pib.h"
@@ -155,7 +156,7 @@
return;
}
- err = fdt_fixup_phy_connection(blob, off, SGMII);
+ err = fdt_fixup_phy_connection(blob, off, PHY_INTERFACE_MODE_SGMII);
if (err) {
printf("WARNING: could not set phy-connection-type for %s: "
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index ecda222..89557d2 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -39,6 +39,7 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <fsl_esdhc.h>
+#include <phy.h>
#include "bcsr.h"
#if defined(CONFIG_PQ_MDS_PIB)
@@ -550,7 +551,8 @@
break;
}
- err = fdt_fixup_phy_connection(blob, nodeoff, RMII);
+ err = fdt_fixup_phy_connection(blob, nodeoff,
+ PHY_INTERFACE_MODE_RMII);
if (err < 0) {
printf("WARNING: could not set phy-connection-type "
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index cd80f83..1ecb137 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -30,6 +30,7 @@
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
+#include <phy.h>
/* Default UTBIPAR SMI address */
#ifndef CONFIG_UTBIPAR_INIT_TBIPA
@@ -321,9 +322,9 @@
}
static int uec_set_mac_if_mode(uec_private_t *uec,
- enum fsl_phy_enet_if if_mode, int speed)
+ phy_interface_t if_mode, int speed)
{
- enum fsl_phy_enet_if enet_if_mode;
+ phy_interface_t enet_if_mode;
uec_info_t *uec_info;
uec_t *uec_regs;
u32 upsmr;
@@ -345,15 +346,15 @@
upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
switch (speed) {
- case 10:
+ case SPEED_10:
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
switch (enet_if_mode) {
- case MII:
+ case PHY_INTERFACE_MODE_MII:
break;
- case RGMII:
+ case PHY_INTERFACE_MODE_RGMII:
upsmr |= (UPSMR_RPM | UPSMR_R10M);
break;
- case RMII:
+ case PHY_INTERFACE_MODE_RMII:
upsmr |= (UPSMR_R10M | UPSMR_RMM);
break;
default:
@@ -361,15 +362,15 @@
break;
}
break;
- case 100:
+ case SPEED_100:
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
switch (enet_if_mode) {
- case MII:
+ case PHY_INTERFACE_MODE_MII:
break;
- case RGMII:
+ case PHY_INTERFACE_MODE_RGMII:
upsmr |= UPSMR_RPM;
break;
- case RMII:
+ case PHY_INTERFACE_MODE_RMII:
upsmr |= UPSMR_RMM;
break;
default:
@@ -377,23 +378,24 @@
break;
}
break;
- case 1000:
+ case SPEED_1000:
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
switch (enet_if_mode) {
- case GMII:
+ case PHY_INTERFACE_MODE_GMII:
break;
- case TBI:
+ case PHY_INTERFACE_MODE_TBI:
upsmr |= UPSMR_TBIM;
break;
- case RTBI:
+ case PHY_INTERFACE_MODE_RTBI:
upsmr |= (UPSMR_RPM | UPSMR_TBIM);
break;
- case RGMII_RXID:
- case RGMII_ID:
- case RGMII:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII:
upsmr |= UPSMR_RPM;
break;
- case SGMII:
+ case PHY_INTERFACE_MODE_SGMII:
upsmr |= UPSMR_SGMM;
break;
default:
@@ -518,7 +520,7 @@
struct uec_mii_info *mii_info = uec->mii_info;
extern void change_phy_interface_mode(struct eth_device *dev,
- enum fsl_phy_enet_if mode, int speed);
+ phy_interface_t mode, int speed);
uec_regs = uec->uec_regs;
if (mii_info->link) {
@@ -536,19 +538,19 @@
}
if (mii_info->speed != uec->oldspeed) {
- enum fsl_phy_enet_if mode = \
+ phy_interface_t mode =
uec->uec_info->enet_interface_type;
if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
switch (mii_info->speed) {
- case 1000:
+ case SPEED_1000:
break;
- case 100:
+ case SPEED_100:
printf ("switching to rgmii 100\n");
- mode = RGMII;
+ mode = PHY_INTERFACE_MODE_RGMII;
break;
- case 10:
+ case SPEED_10:
printf ("switching to rgmii 10\n");
- mode = RGMII;
+ mode = PHY_INTERFACE_MODE_RGMII;
break;
default:
printf("%s: Ack,Speed(%d)is illegal\n",
@@ -1112,8 +1114,8 @@
out_be32(&uec_regs->utbipar, utbipar);
/* Configure the TBI for SGMII operation */
- if ((uec->uec_info->enet_interface_type == SGMII) &&
- (uec->uec_info->speed == 1000)) {
+ if ((uec->uec_info->enet_interface_type == PHY_INTERFACE_MODE_SGMII) &&
+ (uec->uec_info->speed == SPEED_1000)) {
uec_write_phy_reg(uec->dev, uec_regs->utbipar,
ENET_TBI_MII_ANA, TBIANA_SETTINGS);
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 94eb9a2..e63bf3a 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -25,6 +25,7 @@
#include "qe.h"
#include "uccf.h"
+#include <phy.h>
#include <asm/fsl_enet.h>
#define MAX_TX_THREADS 8
@@ -691,7 +692,7 @@
u16 rx_bd_ring_len;
u16 tx_bd_ring_len;
u8 phy_address;
- enum fsl_phy_enet_if enet_interface_type;
+ phy_interface_t enet_interface_type;
int speed;
} uec_info_t;
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index c83ca4b..e26218b 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -25,6 +25,7 @@
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
+#include <phy.h>
#define ugphy_printk(format, arg...) \
printf(format "\n", ## arg)
@@ -456,8 +457,9 @@
gbit_config_aneg(mii_info);
- if ((uec->uec_info->enet_interface_type == RGMII_RXID) &&
- (uec->uec_info->speed == 1000)) {
+ if ((uec->uec_info->enet_interface_type ==
+ PHY_INTERFACE_MODE_RGMII_RXID) &&
+ (uec->uec_info->speed == SPEED_1000)) {
u16 val;
int cnt = 50;
@@ -485,22 +487,22 @@
{
struct eth_device *edev = mii_info->dev;
uec_private_t *uec = edev->priv;
- enum fsl_phy_enet_if iface = uec->uec_info->enet_interface_type;
+ phy_interface_t iface = uec->uec_info->enet_interface_type;
int speed = uec->uec_info->speed;
- if ((speed == 1000) &&
- (iface == RGMII_ID ||
- iface == RGMII_RXID ||
- iface == RGMII_TXID)) {
+ if ((speed == SPEED_1000) &&
+ (iface == PHY_INTERFACE_MODE_RGMII_ID ||
+ iface == PHY_INTERFACE_MODE_RGMII_RXID ||
+ iface == PHY_INTERFACE_MODE_RGMII_TXID)) {
int temp;
temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR);
- if (iface == RGMII_ID) {
+ if (iface == PHY_INTERFACE_MODE_RGMII_ID) {
temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
- } else if (iface == RGMII_RXID) {
+ } else if (iface == PHY_INTERFACE_MODE_RGMII_RXID) {
temp &= ~MII_M1111_TX_DELAY;
temp |= MII_M1111_RX_DELAY;
- } else if (iface == RGMII_TXID) {
+ } else if (iface == PHY_INTERFACE_MODE_RGMII_TXID) {
temp &= ~MII_M1111_RX_DELAY;
temp |= MII_M1111_TX_DELAY;
}
@@ -853,10 +855,8 @@
return theInfo;
}
-void marvell_phy_interface_mode (struct eth_device *dev,
- enum fsl_phy_enet_if type,
- int speed
- )
+void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type,
+ int speed)
{
uec_private_t *uec = (uec_private_t *) dev->priv;
struct uec_mii_info *mii_info;
@@ -868,8 +868,8 @@
}
mii_info = uec->mii_info;
- if (type == RGMII) {
- if (speed == 100) {
+ if (type == PHY_INTERFACE_MODE_RGMII) {
+ if (speed == SPEED_100) {
uec_phy_write(mii_info, 0x00, 0x9140);
uec_phy_write(mii_info, 0x1d, 0x001f);
uec_phy_write(mii_info, 0x1e, 0x200c);
@@ -890,7 +890,7 @@
uec_phy_write(mii_info, 0x00, 0xa100);
uec_phy_write(mii_info, 0x00, 0x2100);
udelay (1000000);
- } else if (speed == 10) {
+ } else if (speed == SPEED_10) {
uec_phy_write(mii_info, 0x14, 0x8e40);
uec_phy_write(mii_info, 0x1b, 0x800b);
uec_phy_write(mii_info, 0x14, 0x0c82);
@@ -908,7 +908,7 @@
}
void change_phy_interface_mode (struct eth_device *dev,
- enum fsl_phy_enet_if type, int speed)
+ phy_interface_t type, int speed)
{
#ifdef CONFIG_PHY_MODE_NEED_CHANGE
marvell_phy_interface_mode (dev, type, speed);
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 1191eea..e25d5ac 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -348,7 +348,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 4
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif
@@ -360,7 +360,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK3
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 0
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index affa3a9..f136a8e 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -361,7 +361,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 3
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif
@@ -373,7 +373,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK8
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 4
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index a959940..49d64a5 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -402,7 +402,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
@@ -414,7 +414,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index b0cdc02..a4f42cf 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -319,7 +319,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 2
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
@@ -331,7 +331,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 4
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 3674e49..6237b23 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -334,7 +334,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 7
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
@@ -346,7 +346,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
#endif /* CONFIG_QE */
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 5a7e99e..8835ef5 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -385,13 +385,13 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 7
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH1 */
@@ -406,13 +406,13 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH2 */
@@ -427,13 +427,13 @@
#define CONFIG_SYS_UEC3_TX_CLK QE_CLK12
#define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC3_PHY_ADDR 2
-#define CONFIG_SYS_UEC3_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */
#define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */
-#define CONFIG_SYS_UEC3_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC3_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH3 */
@@ -448,13 +448,13 @@
#define CONFIG_SYS_UEC4_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC4_PHY_ADDR 3
-#define CONFIG_SYS_UEC4_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */
#define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */
-#define CONFIG_SYS_UEC4_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC4_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH4 */
@@ -468,7 +468,7 @@
#define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE
#define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC6_PHY_ADDR 4
-#define CONFIG_SYS_UEC6_INTERFACE_TYPE SGMII
+#define CONFIG_SYS_UEC6_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
#define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000
#endif /* CONFIG_UEC_ETH6 */
@@ -481,7 +481,7 @@
#define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE
#define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC8_PHY_ADDR 6
-#define CONFIG_SYS_UEC8_INTERFACE_TYPE SGMII
+#define CONFIG_SYS_UEC8_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
#define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000
#endif /* CONFIG_UEC_ETH8 */
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 8fcadfe..b98e6a1 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -295,7 +295,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif