Initial port to MCC200 board (work in progress)
Minimally modified patch by Bluetechnix, Vienna
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
new file mode 100644
index 0000000..5f1fd88
--- /dev/null
+++ b/include/configs/mcc200.h
@@ -0,0 +1,402 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5200
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MCC200 1 /* ... on MCC200 board */
+
+#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */
+
+#define CONFIG_MISC_INIT_R
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+
+//###CHD: MPC5100 gibt es nicht -> weg damit!
+#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+//Wenn geht PCI raus!
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+#define CONFIG_PCI_SCAN_SHOW 1
+#undef CONFIG_PCI_SCAN_SHOW
+
+#define CONFIG_PCI_MEM_BUS 0x40000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x50000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x01000000
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_MII 1
+#define CONFIG_EEPRO100 1
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+#undef CONFIG_NS8382X
+
+#define ADD_PCI_CMD CFG_CMD_PCI
+
+#else /* MPC5100 */
+
+#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */
+
+#endif
+
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+
+/* USB */
+#if 1
+#define CONFIG_USB_OHCI
+#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
+#define CONFIG_USB_STORAGE
+#else
+#define ADD_USB_CMD 0
+#endif
+
+//###CHD: BOOTROm raus!
+#if defined(CONFIG_BOOT_ROM)
+#define ADD_DOC_CMD 0
+#else
+#define ADD_DOC_CMD CFG_CMD_DOC
+#endif
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ ADD_DOC_CMD | \
+ ADD_PCI_CMD | \
+ ADD_USB_CMD | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IDE | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=lmpc\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
+ "rootpath=/opt/eldk30/ppc_82xx\0" \
+ "bootfile=/tftpboot/LMPC/uImage\0" \
+ "baudrate=115200\0" \
+ "serverip=192.168.0.1\0" \
+ "ipaddr=192.168.0.2\0" \
+ "ethaddr=00:02:44:7d:73:3b\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if defined(CONFIG_MPC5200)
+/*
+ * IPB Bus clocking configuration.
+ */
+#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#endif
+
+//###CHD: EEProm config RTC config sollte raus, gibt es nciht bei uns auf I2C!
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
+
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR 0x58
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_PCF8563
+#define CFG_I2C_RTC_ADDR 0x51
+
+//###CHD: meiner Ansicht nach auch raus!
+/*
+ * Disk-On-Chip configuration
+ */
+
+#define CFG_DOC_SHORT_TIMEOUT
+#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */
+
+#define CFG_DOC_SUPPORT_2000
+#define CFG_DOC_SUPPORT_MILLENNIUM
+#define CFG_DOC_BASE 0xE0000000
+#define CFG_DOC_SIZE 0x00100000
+
+//###CHD: BOOTROm raus!
+#if defined(CONFIG_BOOT_ROM)
+/*
+ * Flash configuration (8,16 or 32 MB)
+ * TEXT base always at 0xFFF00000
+ * ENV_ADDR always at 0xFFF40000
+ * FLASH_BASE at 0xFC000000 for 32 MB
+ * 0xFD000000 for 16 MB
+ * 0xFD800000 for 8 MB
+ */
+#define CFG_FLASH_BASE 0xfc000000
+#define CFG_FLASH_SIZE 0x02000000
+#define CFG_BOOTROM_BASE 0xFFF00000
+#define CFG_BOOTROM_SIZE 0x00080000
+#define CFG_ENV_ADDR (0xFDF00000 + 0x40000)
+#else
+/*
+ * Flash configuration (8,16 or 32 MB)
+ * TEXT base always at 0xFFF00000
+ * ENV_ADDR always at 0xFFF40000
+ * FLASH_BASE at 0xFE000000 for 32 MB
+ * 0xFF000000 for 16 MB
+ * 0xFF800000 for 8 MB
+ */
+#define CFG_FLASH_BASE 0xfe000000
+#define CFG_FLASH_SIZE 0x02000000
+#define CFG_ENV_ADDR (0xFFF00000 + 0x40000)
+#endif
+#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
+
+#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
+#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+
+#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
+
+#undef CONFIG_FLASH_16BIT /* Flash is 32-bit */
+
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x10000
+#define CFG_ENV_SECT_SIZE 0x40000
+#define CONFIG_ENV_OVERWRITE 1
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xf0000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_DEFAULT_MBAR 0x80000000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+/*
+ * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ */
+/* #define CONFIG_FEC_10MBIT 1 */
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * GPIO configuration
+ */
+//###CHD: MSB = 1 -> 64MB: funktioniert nicht: ERRATA - BUG?
+//###CHD: 0x10000004 = 32MB SDRAM
+//###CHD: 0x90000004 = 64MB SDRAM
+#define CFG_GPS_PORT_CONFIG 0x10000004
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+#else
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL 0
+#endif
+
+//###CHD: hier sollte das BOOT_ROM raus!
+#if defined(CONFIG_BOOT_ROM)
+#define CFG_BOOTCS_START CFG_BOOTROM_BASE
+#define CFG_BOOTCS_SIZE CFG_BOOTROM_SIZE
+#define CFG_BOOTCS_CFG 0x00047800
+#define CFG_CS0_START CFG_BOOTROM_BASE
+#define CFG_CS0_SIZE CFG_BOOTROM_SIZE
+#define CFG_CS1_START CFG_FLASH_BASE
+#define CFG_CS1_SIZE CFG_FLASH_SIZE
+#define CFG_CS1_CFG 0x0004fb00
+#else
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG 0x0004fb00
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+#define CFG_CS1_START CFG_DOC_BASE
+#define CFG_CS1_SIZE CFG_DOC_SIZE
+#define CFG_CS1_CFG 0x00047800
+#endif
+
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x33333333
+
+#define CFG_RESET_ADDRESS 0xff000000
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00005000
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+//###CHD: eigentlich das ganze IDE zeugs raus (IDE wird derzeit nciht mehr gescannt!)
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+
+#undef CONFIG_IDE_RESET /* reset for ide supported */
+#define CONFIG_IDE_PREINIT
+#undef CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS 0 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 2 /* max. 2 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (0x0060)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (0x005C)
+
+/* Interval between registers */
+#define CFG_ATA_STRIDE 4
+
+#endif /* __CONFIG_H */