arm: dts: imx8mm: sync dts from Linux Kernel 5.6.7
This patch synchronizes the device tree with that from 5.6.7.
This also adds nodes for crypto and ddrc, which makes keeping
the device tree files from individual boards in sync with the
Linux kernel. This is helpful when boads reference those nodes.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/dts/imx8mm.dtsi b/arch/arm/dts/imx8mm.dtsi
index 8aafad2..1e5e115 100644
--- a/arch/arm/dts/imx8mm.dtsi
+++ b/arch/arm/dts/imx8mm.dtsi
@@ -12,7 +12,6 @@
#include "imx8mm-pinfunc.h"
/ {
- compatible = "fsl,imx8mm";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
@@ -141,11 +140,6 @@
};
};
- memory@40000000 {
- device_type = "memory";
- reg = <0x0 0x40000000 0 0x80000000>;
- };
-
osc_32k: clock-osc-32k {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -233,7 +227,7 @@
ranges = <0x0 0x0 0x0 0x3e000000>;
aips1: bus@30000000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
@@ -394,7 +388,7 @@
};
sdma2: dma-controller@302c0000 {
- compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x302c0000 0x10000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
@@ -405,7 +399,7 @@
};
sdma3: dma-controller@302b0000 {
- compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x302b0000 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
@@ -439,7 +433,7 @@
};
anatop: anatop@30360000 {
- compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus";
+ compatible = "fsl,imx8mm-anatop", "syscon";
reg = <0x30360000 0x10000>;
};
@@ -479,14 +473,18 @@
<&clk IMX8MM_CLK_AUDIO_AHB>,
<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MM_SYS_PLL3>,
- <&clk IMX8MM_VIDEO_PLL1>;
+ <&clk IMX8MM_VIDEO_PLL1>,
+ <&clk IMX8MM_AUDIO_PLL1>,
+ <&clk IMX8MM_AUDIO_PLL2>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
<&clk IMX8MM_SYS_PLL1_800M>;
assigned-clock-rates = <0>,
<400000000>,
<400000000>,
<750000000>,
- <594000000>;
+ <594000000>,
+ <393216000>,
+ <361267200>;
};
src: reset-controller@30390000 {
@@ -498,7 +496,7 @@
};
aips2: bus@30400000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
@@ -557,7 +555,7 @@
};
aips3: bus@30800000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30800000 0x30800000 0x400000>;
@@ -638,6 +636,36 @@
status = "disabled";
};
+ crypto: crypto@30900000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30900000 0x40000>;
+ ranges = <0 0x30900000 0x40000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_AHB>,
+ <&clk IMX8MM_CLK_IPG_ROOT>;
+ clock-names = "aclk", "ipg";
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
i2c1: i2c@30a20000 {
compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
@@ -698,8 +726,6 @@
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
<&clk IMX8MM_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
- assigned-clocks = <&clk IMX8MM_CLK_USDHC1>;
- assigned-clock-rates = <400000000>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
bus-width = <4>;
@@ -728,8 +754,6 @@
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
<&clk IMX8MM_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
- assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
- assigned-clock-rates = <400000000>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
bus-width = <4>;
@@ -737,11 +761,11 @@
};
sdma1: dma-controller@30bd0000 {
- compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
- <&clk IMX8MM_CLK_SDMA1_ROOT>;
+ <&clk IMX8MM_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
@@ -776,7 +800,7 @@
};
aips4: bus@32c00000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
@@ -859,6 +883,16 @@
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+ ddrc: memory-controller@3d400000 {
+ compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+ reg = <0x3d400000 0x400000>;
+ clock-names = "core", "pll", "alt", "apb";
+ clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+ <&clk IMX8MM_DRAM_PLL>,
+ <&clk IMX8MM_CLK_DRAM_ALT>,
+ <&clk IMX8MM_CLK_DRAM_APB>;
+ };
+
ddr-pmu@3d800000 {
compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
reg = <0x3d800000 0x400000>;