mpc85xx: introduce the kmp204x reference design support
This patch introduces the support for Keymile's kmp204x reference
design. This design is based on Freescale's P2040/P2041 SoC.
The peripherals used by this design are:
- DDR3 RAM with SPD support
- SPI NOR Flash as boot medium
- NAND Flash
- 2 PCIe busses (hosts 1 and 3)
- 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5)
- 3 Local Bus windows, with one dedicated to the QRIO reset/power mgmt
FPGA
- 2 HW I2C busses
- last but not least, the mandatory serial port
The board/keymile/kmp204x code is mostly based on Freescale's P2041rdb
support and was changed according to our design (that means essentially
removing what is not present on the designs and a few adaptations).
There is currently only one prototype board that is based on this design
and this patch also introduces it. The board is called kmlion1.
Signed-off-by: Stefan Bigler <stefan.bigler@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
kmp204x: update the ENV #define
The comments had to be refined as well as the total size
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
[York Sun: fix ddr.c]
Acked-by: York Sun <yorksun@freescale.com>
diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h
new file mode 100644
index 0000000..4158c8d
--- /dev/null
+++ b/include/configs/kmp204x.h
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* KMLION1 */
+#if defined(CONFIG_KMLION1)
+#define CONFIG_HOSTNAME kmlion1
+#define CONFIG_KM_BOARD_NAME "kmlion1"
+
+#else
+#error ("Board not supported")
+#endif
+
+#define CONFIG_KMP204X
+
+#include "km/kmp204x-common.h"
+
+#if defined(CONFIG_KMLION1)
+/* App1 Local bus */
+#define CONFIG_SYS_LBAPP1_BASE 0xD0000000
+#define CONFIG_SYS_LBAPP1_BASE_PHYS 0xFD0000000ull
+
+#define CONFIG_SYS_LBAPP1_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_LBAPP1_BASE_PHYS) \
+ | BR_PS_8 /* Port Size 8 bits */ \
+ | BR_DECC_OFF /* no error corr */ \
+ | BR_MS_GPCM /* MSEL = GPCM */ \
+ | BR_V) /* valid */
+
+#define CONFIG_SYS_LBAPP1_OR_PRELIM (OR_AM_256MB /* length 256MB */ \
+ | OR_GPCM_ACS_DIV2 /* LCS 1/2 clk after */ \
+ | OR_GPCM_CSNT /* LCS 1/4 clk before */ \
+ | OR_GPCM_SCY_2 /* 2 clk wait cycles */ \
+ | OR_GPCM_TRLX /* relaxed tmgs */ \
+ | OR_GPCM_EAD) /* extra bus clk cycles */
+/* Local bus app1 Base Address */
+#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_LBAPP1_BR_PRELIM
+/* Local bus app1 Options */
+#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_LBAPP1_OR_PRELIM
+
+/* App2 Local bus */
+#define CONFIG_SYS_LBAPP2_BASE 0xE0000000
+#define CONFIG_SYS_LBAPP2_BASE_PHYS 0xFE0000000ull
+
+#define CONFIG_SYS_LBAPP2_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_LBAPP2_BASE_PHYS) \
+ | BR_PS_8 /* Port Size 8 bits */ \
+ | BR_DECC_OFF /* no error corr */ \
+ | BR_MS_GPCM /* MSEL = GPCM */ \
+ | BR_V) /* valid */
+
+#define CONFIG_SYS_LBAPP2_OR_PRELIM (OR_AM_256MB /* length 256MB */ \
+ | OR_GPCM_ACS_DIV2 /* LCS 1/2 clk after */ \
+ | OR_GPCM_CSNT /* LCS 1/4 clk before */ \
+ | OR_GPCM_SCY_2 /* 2 clk wait cycles */ \
+ | OR_GPCM_TRLX /* relaxed tmgs */ \
+ | OR_GPCM_EAD) /* extra bus clk cycles */
+/* Local bus app2 Base Address */
+#define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_LBAPP2_BR_PRELIM
+/* Local bus app2 Options */
+#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_LBAPP2_OR_PRELIM
+#endif
+
+#endif /* __CONFIG_H */