x86: config: Move common x86 configs to a common file
Many of the x86 CONFIG options will be common across different boards. Move
them to a common file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
new file mode 100644
index 0000000..825e9f7
--- /dev/null
+++ b/include/configs/x86-common.h
@@ -0,0 +1,251 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2008
+ * Graeme Russ, graeme.russ@gmail.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/ibmpc.h>
+
+#ifndef __CONFIG_X86_COMMON_H
+#define __CONFIG_X86_COMMON_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_SYS_VSNPRINTF
+#define CONFIG_ZBOOT_32
+#define CONFIG_PHYSMEM
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_DM
+#define CONFIG_CMD_DM
+#define CONFIG_DM_GPIO
+#define CONFIG_DM_SERIAL
+
+#define CONFIG_LMB
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_LZO
+#define CONFIG_FIT
+#undef CONFIG_ZLIB
+#undef CONFIG_GZIP
+#define CONFIG_SYS_BOOTM_LEN (16 << 20)
+
+/* SATA AHCI storage */
+
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SATA_INTEL
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_LIBATA
+#define CONFIG_SYS_64BIT_LBA
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+#endif
+
+/* Generic TPM interfaced through LPC bus */
+#define CONFIG_TPM
+#define CONFIG_TPM_TIS_LPC
+#define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000
+
+/*-----------------------------------------------------------------------
+ * Real Time Clock Configuration
+ */
+#define CONFIG_RTC_MC146818
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0
+#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_BASE_ADDRESS
+
+/*-----------------------------------------------------------------------
+ * Serial Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, \
+ 9600, 19200, 38400, 115200}
+#define CONFIG_SYS_NS16550_PORT_MAPPED
+
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_STDIO_DEREGISTER
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_COMMAND_HISTORY
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_SUPPORT_VFAT
+/************************************************************
+ * ATAPI support (experimental)
+ ************************************************************/
+#define CONFIG_ATAPI
+
+/************************************************************
+ * DISK Partition support
+ ************************************************************/
+#define CONFIG_EFI_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION /* Experimental */
+
+#define CONFIG_CMD_PART
+#define CONFIG_CMD_CBFS
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_PARTITION_UUIDS
+
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+/* x86 GPIOs are accessed through a PCI device */
+#define CONFIG_INTEL_ICH6_GPIO
+
+/*-----------------------------------------------------------------------
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ECHO
+#undef CONFIG_CMD_FLASH
+#define CONFIG_CMD_FPGA
+#define CONFIG_CMD_FPGA_LOADMK
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_IO
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ITEST
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SETGETDCR
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_TIME
+#define CONFIG_CMD_GETTIME
+#define CONFIG_CMD_XIMG
+#define CONFIG_CMD_SCSI
+
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+
+#define CONFIG_CMD_ZBOOT
+#define CONFIG_CMD_ELF
+
+#define CONFIG_BOOTARGS \
+ "root=/dev/sdb3 init=/sbin/init rootwait ro"
+#define CONFIG_BOOTCOMMAND \
+ "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000"
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE 512
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + \
+ 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x00100000
+#define CONFIG_SYS_MEMTEST_END 0x01000000
+#define CONFIG_SYS_LOAD_ADDR 0x20000000
+
+/*-----------------------------------------------------------------------
+ * Video Configuration
+ */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_SW_CURSOR
+#define VIDEO_FB_16BPP_WORD_SWAP
+#define CONFIG_I8042_KBD
+#define CONFIG_CFB_CONSOLE
+
+/*-----------------------------------------------------------------------
+ * CPU Features
+ */
+
+#define CONFIG_SYS_X86_TSC_TIMER
+#define CONFIG_SYS_PCAT_INTERRUPTS
+#define CONFIG_SYS_PCAT_TIMER
+#define CONFIG_SYS_NUM_IRQS 16
+
+#define CONFIG_SYS_STACK_SIZE (32 * 1024)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MALLOC_LEN 0x200000
+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/*-----------------------------------------------------------------------
+ * FLASH configuration
+ */
+#define CONFIG_ICH_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_MACRONIX
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_GIGADEVICE
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SF_TEST
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI
+
+/*-----------------------------------------------------------------------
+ * Environment configuration
+ */
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE 0x01000
+
+/*-----------------------------------------------------------------------
+ * PCI configuration
+ */
+#define CONFIG_PCI
+
+/*-----------------------------------------------------------------------
+ * USB configuration
+ */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_PCI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL
+
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_TFTP_TSIZE
+#define CONFIG_CMD_DHCP
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+#define CONFIG_CMD_USB
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_STD_DEVICES_SETTINGS
+
+#endif /* __CONFIG_H */