| CONFIG_ARM=y |
| CONFIG_SYS_VENDOR="topic" |
| CONFIG_SYS_CONFIG_NAME="topic_miami" |
| CONFIG_SPL_SYS_DCACHE_OFF=y |
| CONFIG_SYS_L2CACHE_OFF=y |
| CONFIG_ARCH_ZYNQ=y |
| CONFIG_TEXT_BASE=0x4000000 |
| CONFIG_SF_DEFAULT_SPEED=108000000 |
| CONFIG_ENV_SIZE=0x8000 |
| CONFIG_DM_GPIO=y |
| CONFIG_DEFAULT_DEVICE_TREE="zynq-topic-miamilite" |
| CONFIG_SPL_STACK_R_ADDR=0x200000 |
| CONFIG_SPL_STACK=0xfffffe00 |
| CONFIG_SPL=y |
| CONFIG_DEBUG_UART_CLOCK=100000000 |
| CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamilite/ps7_regs.txt" |
| CONFIG_SYS_LOAD_ADDR=0x0 |
| CONFIG_DEBUG_UART=y |
| CONFIG_SYS_MEMTEST_START=0x00000000 |
| CONFIG_SYS_MEMTEST_END=0x18000000 |
| CONFIG_REMAKE_ELF=y |
| CONFIG_SYS_CUSTOM_LDSCRIPT=y |
| CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" |
| CONFIG_DISTRO_DEFAULTS=y |
| CONFIG_BOOTDELAY=0 |
| CONFIG_BOOTCOMMAND="if mmcinfo; then if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; fi; fi; run $modeboot" |
| CONFIG_USE_PREBOOT=y |
| CONFIG_CLOCKS=y |
| CONFIG_SPL_MAX_SIZE=0x30000 |
| CONFIG_SPL_HAS_BSS_LINKER_SECTION=y |
| CONFIG_SPL_BSS_START_ADDR=0x100000 |
| CONFIG_SPL_BSS_MAX_SIZE=0x100000 |
| # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set |
| CONFIG_SPL_STACK_R=y |
| CONFIG_SYS_SPL_MALLOC=y |
| CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 |
| CONFIG_SPL_SPI_LOAD=y |
| CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000 |
| CONFIG_SYS_PROMPT="zynq-uboot> " |
| CONFIG_SYS_MAXARGS=32 |
| CONFIG_SYS_PBSIZE=2077 |
| CONFIG_SYS_BOOTM_LEN=0x3c00000 |
| CONFIG_CMD_THOR_DOWNLOAD=y |
| CONFIG_THOR_RESET_OFF=y |
| CONFIG_CMD_MEMTEST=y |
| CONFIG_CMD_DFU=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_CACHE=y |
| CONFIG_OF_EMBED=y |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| # CONFIG_NET is not set |
| CONFIG_SPL_DM_SEQ_ALIAS=y |
| CONFIG_DFU_RAM=y |
| CONFIG_SYS_DFU_DATA_BUF_SIZE=0x600000 |
| CONFIG_FPGA_XILINX=y |
| CONFIG_FPGA_ZYNQPL=y |
| CONFIG_DM_I2C=y |
| CONFIG_SYS_I2C_CADENCE=y |
| CONFIG_MMC_SDHCI=y |
| CONFIG_MMC_SDHCI_ZYNQ=y |
| CONFIG_SPI_FLASH_STMICRO=y |
| # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set |
| CONFIG_DEBUG_UART_ZYNQ=y |
| CONFIG_ARM_DCC=y |
| CONFIG_ZYNQ_SERIAL=y |
| CONFIG_ZYNQ_QSPI=y |
| CONFIG_USB=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_ULPI_VIEWPORT=y |
| CONFIG_USB_ULPI=y |
| CONFIG_USB_GADGET=y |
| CONFIG_USB_GADGET_MANUFACTURER="Xilinx" |
| CONFIG_USB_GADGET_VENDOR_NUM=0x03fd |
| CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 |
| CONFIG_CI_UDC=y |
| CONFIG_USB_GADGET_DOWNLOAD=y |
| CONFIG_SYS_TIMER_COUNTS_DOWN=y |