board: transformer-t30: convert ASUS Transformers to use DM PMIC
Since required drivers were merged, we can safely clean up the
board and switch to DM based driver with device tree support.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
diff --git a/arch/arm/dts/tegra30-asus-p1801-t.dts b/arch/arm/dts/tegra30-asus-p1801-t.dts
index 39f7caf..d62d432 100644
--- a/arch/arm/dts/tegra30-asus-p1801-t.dts
+++ b/arch/arm/dts/tegra30-asus-p1801-t.dts
@@ -101,6 +101,7 @@
regulator-name = "vdd_emmc_core";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
};
/* uSD slot VDD */
@@ -108,6 +109,7 @@
regulator-name = "vdd_usd";
regulator-min-microvolt = <3100000>;
regulator-max-microvolt = <3100000>;
+ regulator-boot-on;
};
/* uSD slot VDDIO */
diff --git a/arch/arm/dts/tegra30-asus-tf600t.dts b/arch/arm/dts/tegra30-asus-tf600t.dts
index fd9d11c..efc6a83 100644
--- a/arch/arm/dts/tegra30-asus-tf600t.dts
+++ b/arch/arm/dts/tegra30-asus-tf600t.dts
@@ -84,12 +84,14 @@
regulator-name = "vdd_1v2_backlight";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
};
vcore_lcd: vdd2 {
regulator-name = "vcore_lcd";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
};
vdd_1v8_vio: vddio {
@@ -105,6 +107,7 @@
regulator-name = "vdd_emmc_core";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
};
/* uSD slot VDDIO */
@@ -119,6 +122,7 @@
regulator-name = "avdd_dsi_csi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
};
};
};
diff --git a/arch/arm/dts/tegra30-asus-transformer.dtsi b/arch/arm/dts/tegra30-asus-transformer.dtsi
index 888f9ca..afddb83 100644
--- a/arch/arm/dts/tegra30-asus-transformer.dtsi
+++ b/arch/arm/dts/tegra30-asus-transformer.dtsi
@@ -82,6 +82,7 @@
regulator-name = "vdd_emmc_core";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
};
/* uSD slot VDD */
@@ -89,6 +90,7 @@
regulator-name = "vdd_usd";
regulator-min-microvolt = <3100000>;
regulator-max-microvolt = <3100000>;
+ regulator-boot-on;
};
/* uSD slot VDDIO */
diff --git a/board/asus/transformer-t30/Kconfig b/board/asus/transformer-t30/Kconfig
index accc999..915436b 100644
--- a/board/asus/transformer-t30/Kconfig
+++ b/board/asus/transformer-t30/Kconfig
@@ -9,14 +9,4 @@
config SYS_CONFIG_NAME
default "transformer-t30"
-config TRANSFORMER_SPI_BOOT
- bool "Enable support for SPI based flash"
- select TEGRA20_SLINK
- select DM_SPI_FLASH
- select SPI_FLASH_WINBOND
- help
- Tegra 3 based Transformers with Windows RT have core
- boot sequence (BCT and EBT) on separate SPI FLASH
- memory with 4MB size.
-
endif
diff --git a/board/asus/transformer-t30/configs/tf600t.config b/board/asus/transformer-t30/configs/tf600t.config
index 18ab4fb..e40d0fd 100644
--- a/board/asus/transformer-t30/configs/tf600t.config
+++ b/board/asus/transformer-t30/configs/tf600t.config
@@ -1,4 +1,4 @@
CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf600t"
-CONFIG_TRANSFORMER_SPI_BOOT=y
CONFIG_BOOTCOMMAND="setenv gpio_button 222; if run check_button; then poweroff; fi; setenv gpio_button 132; if run check_button; then echo Starting SPI flash update ...; run update_spi; fi; run bootcmd_usb0; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;"
+CONFIG_SPI_FLASH_WINBOND=y
CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
diff --git a/board/asus/transformer-t30/transformer-t30-spl.c b/board/asus/transformer-t30/transformer-t30-spl.c
index 89819b2..952e2c8 100644
--- a/board/asus/transformer-t30/transformer-t30-spl.c
+++ b/board/asus/transformer-t30/transformer-t30-spl.c
@@ -9,7 +9,7 @@
* Svyatoslav Ryhel <clamor95@gmail.com>
*/
-#include <common.h>
+#include <asm/arch/tegra.h>
#include <asm/arch-tegra/tegra_i2c.h>
#include <linux/delay.h>
diff --git a/board/asus/transformer-t30/transformer-t30.c b/board/asus/transformer-t30/transformer-t30.c
index ba795a8..7cac6fd 100644
--- a/board/asus/transformer-t30/transformer-t30.c
+++ b/board/asus/transformer-t30/transformer-t30.c
@@ -9,71 +9,13 @@
/* T30 Transformers derive from Cardhu board */
-#include <common.h>
#include <dm.h>
#include <fdt_support.h>
-#include <i2c.h>
-#include <log.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/gp_padctrl.h>
-#include <asm/arch/gpio.h>
-#include <asm/gpio.h>
-#include <linux/delay.h>
+
#include "pinmux-config-transformer.h"
-#define TPS65911_I2C_ADDRESS 0x2D
-
-#define TPS65911_VDD1 0x21
-#define TPS65911_VDD1_OP 0x22
-#define TPS65911_LDO1 0x30
-#define TPS65911_LDO2 0x31
-#define TPS65911_LDO3 0x37
-#define TPS65911_LDO5 0x32
-#define TPS65911_LDO6 0x35
-
-#define TPS65911_DEVCTRL 0x3F
-#define DEVCTRL_PWR_OFF_MASK BIT(7)
-#define DEVCTRL_DEV_ON_MASK BIT(2)
-#define DEVCTRL_DEV_OFF_MASK BIT(0)
-
-#ifdef CONFIG_CMD_POWEROFF
-int do_poweroff(struct cmd_tbl *cmdtp, int flag,
- int argc, char *const argv[])
-{
- struct udevice *dev;
- uchar data_buffer[1];
- int ret;
-
- ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
- if (ret) {
- log_debug("cannot find PMIC I2C chip\n");
- return 0;
- }
-
- ret = dm_i2c_read(dev, TPS65911_DEVCTRL, data_buffer, 1);
- if (ret)
- return ret;
-
- data_buffer[0] |= DEVCTRL_PWR_OFF_MASK;
-
- ret = dm_i2c_write(dev, TPS65911_DEVCTRL, data_buffer, 1);
- if (ret)
- return ret;
-
- data_buffer[0] |= DEVCTRL_DEV_OFF_MASK;
- data_buffer[0] &= ~DEVCTRL_DEV_ON_MASK;
-
- ret = dm_i2c_write(dev, TPS65911_DEVCTRL, data_buffer, 1);
- if (ret)
- return ret;
-
- // wait some time and then print error
- mdelay(5000);
- printf("Failed to power off!!!\n");
- return 1;
-}
-#endif
-
/*
* Routine: pinmux_init
* Description: Do individual peripheral pinmux configs
@@ -92,66 +34,6 @@
}
}
-#ifdef CONFIG_MMC_SDHCI_TEGRA
-static void tps65911_voltage_init(void)
-{
- struct udevice *dev;
- int ret;
-
- ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
- if (ret) {
- log_debug("cannot find PMIC I2C chip\n");
- return;
- }
-
- /* TPS659110: LDO1_REG = 3.3v, ACTIVE to SDMMC4 */
- ret = dm_i2c_reg_write(dev, TPS65911_LDO1, 0xc9);
- if (ret)
- log_debug("vcore_emmc set failed: %d\n", ret);
-
- if (of_machine_is_compatible("asus,tf600t")) {
- /* TPS659110: VDD1_REG = 1.2v, ACTIVE to backlight */
- ret = dm_i2c_reg_write(dev, TPS65911_VDD1_OP, 0x33);
- if (ret)
- log_debug("vdd_bl set failed: %d\n", ret);
-
- ret = dm_i2c_reg_write(dev, TPS65911_VDD1, 0x0d);
- if (ret)
- log_debug("vdd_bl enable failed: %d\n", ret);
-
- /* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 VIO */
- ret = dm_i2c_reg_write(dev, TPS65911_LDO5, 0x65);
- if (ret)
- log_debug("vdd_usd set failed: %d\n", ret);
-
- /* TPS659110: LDO6_REG = 1.2v, ACTIVE to MIPI */
- ret = dm_i2c_reg_write(dev, TPS65911_LDO6, 0x11);
- if (ret)
- log_debug("vdd_mipi set failed: %d\n", ret);
- } else {
- /* TPS659110: LDO2_REG = 3.1v, ACTIVE to SDMMC1 */
- ret = dm_i2c_reg_write(dev, TPS65911_LDO2, 0xb9);
- if (ret)
- log_debug("vdd_usd set failed: %d\n", ret);
-
- /* TPS659110: LDO3_REG = 3.1v, ACTIVE to SDMMC1 VIO */
- ret = dm_i2c_reg_write(dev, TPS65911_LDO3, 0x5d);
- if (ret)
- log_debug("vddio_usd set failed: %d\n", ret);
- }
-}
-
-/*
- * Routine: pin_mux_mmc
- * Description: setup the MMC muxes, power rails, etc.
- */
-void pin_mux_mmc(void)
-{
- /* Bring up uSD and eMMC power */
- tps65911_voltage_init();
-}
-#endif /* MMC */
-
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, struct bd_info *bd)
{
diff --git a/configs/transformer_t30_defconfig b/configs/transformer_t30_defconfig
index 092c0aa..8d828c1 100644
--- a/configs/transformer_t30_defconfig
+++ b/configs/transformer_t30_defconfig
@@ -45,6 +45,7 @@
CONFIG_CMD_UMS_ABORT_KEYED=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PAUSE=y
+CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
@@ -65,10 +66,14 @@
CONFIG_I2C_MUX_GPIO=y
CONFIG_BUTTON_KEYBOARD=y
CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_TPS65910=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_TPS65911=y
CONFIG_PWM_TEGRA=y
CONFIG_SYS_NS16550=y
+CONFIG_TEGRA20_SLINK=y
+CONFIG_SYSRESET_TPS65910=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_TEGRA=y