Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD
In order to be able to migrate the various SoC EHCI CONFIG options we
first need to finish the switch from CONFIG_USB_EHCI to
CONFIG_USB_EHCI_HCD.
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marex@denx.de>
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index c661c77..81c2aad 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -212,7 +212,7 @@
at91sam9x5ek_nand_hw_init();
#endif
-#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI)
+#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI_HCD)
at91_uhp_hw_init();
#endif
#ifdef CONFIG_LCD
diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c
index 7b58fcd..757af9f 100644
--- a/board/compulab/cm_t54/cm_t54.c
+++ b/board/compulab/cm_t54/cm_t54.c
@@ -181,7 +181,7 @@
}
#endif
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
diff --git a/board/gumstix/duovero/duovero.c b/board/gumstix/duovero/duovero.c
index 11d2d7f..09b0c53 100644
--- a/board/gumstix/duovero/duovero.c
+++ b/board/gumstix/duovero/duovero.c
@@ -24,7 +24,7 @@
static void setup_net_chip(void);
#endif
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
#include <usb.h>
#include <asm/arch/ehci.h>
#include <asm/ehci-omap.h>
@@ -206,7 +206,7 @@
return rc;
}
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
index 12358f1..1deb2bd 100644
--- a/board/htkw/mcx/mcx.c
+++ b/board/htkw/mcx/mcx.c
@@ -19,7 +19,7 @@
#include <asm/arch/clock.h>
#include <errno.h>
#include <i2c.h>
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
#include <usb.h>
#include <asm/ehci-omap.h>
#endif
@@ -33,7 +33,7 @@
/* Address of the framebuffer in RAM. */
#define FB_START_ADDRESS 0x88000000
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 5e44726..fd441d4 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -27,7 +27,7 @@
#include <asm/mach-types.h>
#include "overo.h"
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
#include <usb.h>
#include <asm/ehci-omap.h>
#endif
@@ -393,7 +393,7 @@
}
#endif
-#if defined(CONFIG_USB_EHCI)
+#if defined(CONFIG_USB_EHCI_HCD)
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
@@ -420,4 +420,4 @@
return omap_ehci_hcd_stop();
}
-#endif /* CONFIG_USB_EHCI */
+#endif /* CONFIG_USB_EHCI_HCD */
diff --git a/board/technexion/tao3530/tao3530.c b/board/technexion/tao3530/tao3530.c
index cba48d4..4b61973 100644
--- a/board/technexion/tao3530/tao3530.c
+++ b/board/technexion/tao3530/tao3530.c
@@ -195,7 +195,7 @@
}
#endif
-#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_USB_EHCI_HCD) && !defined(CONFIG_SPL_BUILD)
/* Call usb_stop() before starting the kernel */
void show_boot_progress(int val)
{
@@ -219,4 +219,4 @@
{
return omap_ehci_hcd_stop();
}
-#endif /* CONFIG_USB_EHCI */
+#endif /* CONFIG_USB_EHCI_HCD */
diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c
index ad4b02a..25aeebc 100644
--- a/board/technexion/twister/twister.c
+++ b/board/technexion/twister/twister.c
@@ -19,7 +19,7 @@
#include <spl.h>
#include <mmc.h>
#include <asm/gpio.h>
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
#include <usb.h>
#include <asm/ehci-omap.h>
#endif
@@ -46,7 +46,7 @@
XR16L2751_GPMC_CONFIG6,
};
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index 6b05541..6e73ae1 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -23,7 +23,7 @@
#include <i2c.h>
#include <spartan3.h>
#include <asm/gpio.h>
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
#include <usb.h>
#include <asm/ehci-omap.h>
#endif
@@ -95,7 +95,7 @@
FPGA_GPMC_CONFIG6,
};
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index e90fe1a..c1365e2 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -36,7 +36,7 @@
#include "beagle.h"
#include <command.h>
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
#include <usb.h>
#include <asm/ehci-omap.h>
#endif
@@ -538,7 +538,7 @@
}
#endif
-#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_USB_EHCI_HCD) && !defined(CONFIG_SPL_BUILD)
/* Call usb_stop() before starting the kernel */
void show_boot_progress(int val)
{
@@ -563,7 +563,7 @@
return omap_ehci_hcd_stop();
}
-#endif /* CONFIG_USB_EHCI */
+#endif /* CONFIG_USB_EHCI_HCD */
#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)
int board_eth_init(bd_t *bis)
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index 64d772c..7eaffe3 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -20,7 +20,7 @@
#include "mux_data.h"
-#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP)
#include <sata.h>
#include <usb.h>
#include <asm/gpio.h>
@@ -151,7 +151,7 @@
return 0;
}
-#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP)
static void enable_host_clocks(void)
{
int auxclk;
@@ -220,7 +220,7 @@
}
#endif
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 187ff3c..5822366 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -15,7 +15,7 @@
#include "panda_mux_data.h"
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
#include <usb.h>
#include <asm/arch/ehci.h>
#include <asm/ehci-omap.h>
@@ -301,7 +301,7 @@
#endif
#endif
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,