usb: dwc2: Add reset ctrl to driver
Add code to reset all reset signals as in usb DT node. A reset property
is an optional feature, so only print out a warning and do not fail if a
reset property is not present.
If a reset property is discovered, then use it to deassert, thus
bringing the IP out of reset.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
index cbe065b..b6f008a 100644
--- a/drivers/usb/host/dwc2.c
+++ b/drivers/usb/host/dwc2.c
@@ -15,6 +15,7 @@
#include <wait_bit.h>
#include <asm/io.h>
#include <power/regulator.h>
+#include <reset.h>
#include "dwc2.h"
@@ -49,6 +50,8 @@
*/
bool hnp_srp_disable;
bool oc_disable;
+
+ struct reset_ctl_bulk resets;
};
#ifndef CONFIG_DM_USB
@@ -1124,11 +1127,43 @@
}
}
+static int dwc2_reset(struct udevice *dev)
+{
+ int ret;
+ struct dwc2_priv *priv = dev_get_priv(dev);
+
+ ret = reset_get_bulk(dev, &priv->resets);
+ if (ret) {
+ dev_warn(dev, "Can't get reset: %d\n", ret);
+ /* Return 0 if error due to !CONFIG_DM_RESET and reset
+ * DT property is not present.
+ */
+ if (ret == -ENOENT || ret == -ENOTSUPP)
+ return 0;
+ else
+ return ret;
+ }
+
+ ret = reset_deassert_bulk(&priv->resets);
+ if (ret) {
+ reset_release_bulk(&priv->resets);
+ dev_err(dev, "Failed to reset: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv)
{
struct dwc2_core_regs *regs = priv->regs;
uint32_t snpsid;
int i, j;
+ int ret;
+
+ ret = dwc2_reset(dev);
+ if (ret)
+ return ret;
snpsid = readl(®s->gsnpsid);
dev_info(dev, "Core Release: %x.%03x\n",
@@ -1303,6 +1338,8 @@
dwc2_uninit_common(priv->regs);
+ reset_release_bulk(&priv->resets);
+
return 0;
}