test: gpio: Add tests for the managed API
Add a test to verify that GPIOs can be acquired/released using the managed
API. Also check that the GPIOs are released when the consumer device is
removed.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index 2f55926..ceed2be 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -121,6 +121,9 @@
<&gpio_c 5 GPIO_IN>,
<&gpio_c 6 (GPIO_ACTIVE_LOW|GPIO_OUT|GPIO_OPEN_DRAIN)>,
<&gpio_c 7 (GPIO_ACTIVE_LOW|GPIO_OUT|GPIO_OPEN_SOURCE)>;
+ test4-gpios = <&gpio_a 14>, <&gpio_b 4 1 3 2 1>;
+ test5-gpios = <&gpio_a 19>;
+
int-value = <1234>;
uint-value = <(-1234)>;
int64-value = /bits/ 64 <0x1111222233334444>;
@@ -270,6 +273,13 @@
compatible = "denx,u-boot-devres-test";
};
+ another-test {
+ reg = <0 2>;
+ compatible = "denx,u-boot-fdt-test";
+ test4-gpios = <&gpio_a 14>, <&gpio_b 4 1 3 2 1>;
+ test5-gpios = <&gpio_a 19>;
+ };
+
acpi_test1: acpi-test {
compatible = "denx,u-boot-acpi-test";
acpi-ssdt-test-data = "ab";
diff --git a/test/dm/bus.c b/test/dm/bus.c
index 865e8bd..27b7266 100644
--- a/test/dm/bus.c
+++ b/test/dm/bus.c
@@ -120,7 +120,7 @@
/* Test that we can probe for children */
static int dm_test_bus_children(struct unit_test_state *uts)
{
- int num_devices = 8;
+ int num_devices = 9;
struct udevice *bus;
struct uclass *uc;
diff --git a/test/dm/gpio.c b/test/dm/gpio.c
index 4848152..54e960b 100644
--- a/test/dm/gpio.c
+++ b/test/dm/gpio.c
@@ -10,6 +10,7 @@
#include <malloc.h>
#include <acpi/acpi_device.h>
#include <asm/gpio.h>
+#include <dm/device-internal.h>
#include <dm/root.h>
#include <dm/test.h>
#include <dm/util.h>
@@ -480,3 +481,104 @@
return 0;
}
DM_TEST(dm_test_gpio_get_acpi_irq, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
+
+/* Test that we can get/release GPIOs using managed API */
+static int dm_test_gpio_devm(struct unit_test_state *uts)
+{
+ static const u32 flags = GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE;
+ struct gpio_desc *desc1, *desc2, *desc3, *desc_err;
+ struct udevice *dev;
+ struct udevice *dev2;
+
+ ut_assertok(uclass_get_device_by_name(UCLASS_TEST_FDT, "a-test",
+ &dev));
+ ut_assertok(uclass_get_device_by_name(UCLASS_TEST_FDT, "another-test",
+ &dev2));
+
+ /* Get 3 GPIOs from 'a-test' dev */
+ desc1 = devm_gpiod_get_index(dev, "test4", 0, flags);
+ ut_assert(!IS_ERR(desc1));
+ desc2 = devm_gpiod_get_index(dev, "test4", 1, flags);
+ ut_assert(!IS_ERR(desc2));
+ desc3 = devm_gpiod_get_index_optional(dev, "test5", 0, flags);
+ ut_assert(!IS_ERR(desc3));
+ ut_assert(desc3);
+
+ /*
+ * Try get the same 3 GPIOs from 'a-test' and 'another-test' devices.
+ * check that it fails
+ */
+ desc_err = devm_gpiod_get_index(dev, "test4", 0, flags);
+ ut_asserteq(-EBUSY, PTR_ERR(desc_err));
+ desc_err = devm_gpiod_get_index(dev2, "test4", 0, flags);
+ ut_asserteq(-EBUSY, PTR_ERR(desc_err));
+ desc_err = devm_gpiod_get_index(dev, "test4", 1, flags);
+ ut_asserteq(-EBUSY, PTR_ERR(desc_err));
+ desc_err = devm_gpiod_get_index(dev2, "test4", 1, flags);
+ ut_asserteq(-EBUSY, PTR_ERR(desc_err));
+ desc_err = devm_gpiod_get_index_optional(dev, "test5", 0, flags);
+ ut_asserteq_ptr(NULL, desc_err);
+ desc_err = devm_gpiod_get_index_optional(dev2, "test5", 0, flags);
+ ut_asserteq_ptr(NULL, desc_err);
+
+ /* Try get GPIOs outside of the list */
+ desc_err = devm_gpiod_get_index(dev, "test4", 2, flags);
+ ut_assert(IS_ERR(desc_err));
+ desc_err = devm_gpiod_get_index_optional(dev, "test5", 1, flags);
+ ut_asserteq_ptr(NULL, desc_err);
+
+ /* Manipulate the GPIOs */
+ ut_assertok(dm_gpio_set_value(desc1, 1));
+ ut_asserteq(1, dm_gpio_get_value(desc1));
+ ut_assertok(dm_gpio_set_value(desc1, 0));
+ ut_asserteq(0, dm_gpio_get_value(desc1));
+
+ ut_assertok(dm_gpio_set_value(desc2, 1));
+ ut_asserteq(1, dm_gpio_get_value(desc2));
+ ut_assertok(dm_gpio_set_value(desc2, 0));
+ ut_asserteq(0, dm_gpio_get_value(desc2));
+
+ ut_assertok(dm_gpio_set_value(desc3, 1));
+ ut_asserteq(1, dm_gpio_get_value(desc3));
+ ut_assertok(dm_gpio_set_value(desc3, 0));
+ ut_asserteq(0, dm_gpio_get_value(desc3));
+
+ /* Check that the GPIO cannot be owned by more than one device */
+ desc_err = devm_gpiod_get_index(dev2, "test4", 0, flags);
+ ut_asserteq(-EBUSY, PTR_ERR(desc_err));
+ desc_err = devm_gpiod_get_index(dev2, "test4", 1, flags);
+ ut_asserteq(-EBUSY, PTR_ERR(desc_err));
+ desc_err = devm_gpiod_get_index_optional(dev2, "test5", 0, flags);
+ ut_asserteq_ptr(NULL, desc_err);
+
+ /*
+ * Release one GPIO and check that we can get it back using
+ * 'another-test' and then 'a-test'
+ */
+ devm_gpiod_put(dev, desc2);
+ desc2 = devm_gpiod_get_index(dev2, "test4", 1, flags);
+ ut_assert(!IS_ERR(desc2));
+
+ devm_gpiod_put(dev2, desc2);
+ desc2 = devm_gpiod_get_index(dev, "test4", 1, flags);
+ ut_assert(!IS_ERR(desc2));
+
+ /* Release one GPIO before removing the 'a-test' dev. */
+ devm_gpiod_put(dev, desc2);
+ device_remove(dev, DM_REMOVE_NORMAL);
+
+ /* All the GPIOs must have been freed. We should be able to claim
+ * them with the 'another-test' device.
+ */
+ desc1 = devm_gpiod_get_index(dev2, "test4", 0, flags);
+ ut_assert(!IS_ERR(desc1));
+ desc2 = devm_gpiod_get_index(dev2, "test4", 1, flags);
+ ut_assert(!IS_ERR(desc2));
+ desc3 = devm_gpiod_get_index_optional(dev2, "test5", 0, flags);
+ ut_assert(!IS_ERR(desc3));
+ ut_assert(desc3);
+
+ device_remove(dev2, DM_REMOVE_NORMAL);
+ return 0;
+}
+DM_TEST(dm_test_gpio_devm, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);
diff --git a/test/dm/test-fdt.c b/test/dm/test-fdt.c
index 04802de..26d57f4 100644
--- a/test/dm/test-fdt.c
+++ b/test/dm/test-fdt.c
@@ -251,7 +251,7 @@
/* Test that FDT-based binding works correctly */
static int dm_test_fdt(struct unit_test_state *uts)
{
- const int num_devices = 8;
+ const int num_devices = 9;
struct udevice *dev;
struct uclass *uc;
int ret;
@@ -473,12 +473,12 @@
count = 0;
uclass_id_foreach_dev(UCLASS_TEST_FDT, dev, uc)
count++;
- ut_asserteq(8, count);
+ ut_asserteq(9, count);
count = 0;
uclass_foreach_dev(dev, uc)
count++;
- ut_asserteq(8, count);
+ ut_asserteq(9, count);
return 0;
}