ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2
Backport and squash below Linux 5.2 commits for R-Car Gen3:
Commit id * Summary line
6fffb98645e67b5 arm64: dts: renesas: r8a77990: ebisu: Add GPIO expander
b068ed6efe6244d arm64: dts: renesas: r8a77990: Fix SPDX license identifier style
96c25882252704d ! arm64: dts: renesas: r8a7796: remove unneeded sound #address/size-cells
71ac75dffdae2f8 arm64: dts: renesas: r8a77990: ebisu: Enable LVDS1 encoder
9a0ff5c727b60a3 arm64: dts: renesas: r8a77995: draak: Enable LVDS1 encoder
9130c15829846fa arm64: dts: renesas: ebisu: Fix adv7482 hexadecimal register address
191f7dcd1f5ea1f arm64: dts: renesas: r8a77965: add SSIU support for sound
a8f6110e64422d5 arm64: dts: renesas: ebisu: Enable VIN5
4162aa9db3d4469 arm64: dts: renesas: r8a77995: draak: Enable CAN0, CAN1
af965ba3248edde arm64: dts: renesas: r8a77990: Remove invalid compatible value for CSI40
1f4c123a98098cc arm64: dts: renesas: r8a77990-ebisu: Add BD9571 PMIC
474706117c2baa6 arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config
e2fa79de7ecbef4 arm64: dts: renesas: Update Ebisu and Draak bootargs
de8e8daaf7190ef arm64: dts: renesas: salvator-common: Sort node label
05f1d882d28b871 arm64: dts: renesas: r8a77995: draak: Fix EthernetAVB phy mode to rgmii
7a516e49d975311 arm64: dts: renesas: use extended audio dmac register
e3414b8c45afa5c arm64: dts: renesas: salvator-common: Add GPIO keys support
720066d17c973fd arm64: dts: renesas: r8a7795: Add CMT device nodes
99cb95103e2d058 arm64: dts: renesas: r8a77965: Add CMT device nodes
28a5c61b5136d58 arm64: dts: renesas: r8a77990: Add CMT device nodes
32d622f3290b2a1 arm64: dts: renesas: r8a77965: Remove reg-names of display node
(*) Patch id mismatch between Linux and U-Boot commit.
[!] Dropped changes in arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts,
since the file doesn't exist in the U-Boot tree.
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
diff --git a/arch/arm/dts/r8a77995-draak.dts b/arch/arm/dts/r8a77995-draak.dts
index db2bed1..a7dc11e 100644
--- a/arch/arm/dts/r8a77995-draak.dts
+++ b/arch/arm/dts/r8a77995-draak.dts
@@ -20,7 +20,7 @@
};
chosen {
- bootargs = "ignore_loglevel";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
@@ -168,7 +168,6 @@
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
- phy-mode = "rgmii-txid";
status = "okay";
phy0: ethernet-phy@0 {
@@ -179,6 +178,18 @@
};
};
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-0 = <&can1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
@@ -356,6 +367,13 @@
};
&lvds1 {
+ /*
+ * Even though the LVDS1 output is not connected, the encoder must be
+ * enabled to supply a pixel clock to the DU for the DPAD output when
+ * LVDS0 is in use.
+ */
+ status = "okay";
+
clocks = <&cpg CPG_MOD 727>,
<&x12_clk>,
<&extal_clk>;
@@ -375,6 +393,16 @@
};
};
+ can0_pins: can0 {
+ groups = "can0_data_a";
+ function = "can0";
+ };
+
+ can1_pins: can1 {
+ groups = "can1_data_a";
+ function = "can1";
+ };
+
du_pins: du {
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
function = "du";