ARMV7: Exynos4: Add support for TRATS board
This patch adds support for Samsung TRATS board
Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
new file mode 100644
index 0000000..2925cff
--- /dev/null
+++ b/board/samsung/trats/trats.c
@@ -0,0 +1,379 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Heungjun Kim <riverful.kim@samsung.com>
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/watchdog.h>
+#include <asm/arch/power.h>
+#include <pmic.h>
+#include <usb/s3c_udc.h>
+#include <max8998_pmic.h>
+
+#include "setup.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int board_rev;
+
+#ifdef CONFIG_REVISION_TAG
+u32 get_board_rev(void)
+{
+ return board_rev;
+}
+#endif
+
+static void check_hw_revision(void);
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ check_hw_revision();
+ printf("HW Revision:\t0x%x\n", board_rev);
+
+#if defined(CONFIG_PMIC)
+ pmic_init();
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
+
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+}
+
+static unsigned int get_hw_revision(void)
+{
+ struct exynos4_gpio_part1 *gpio =
+ (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
+ int hwrev = 0;
+ int i;
+
+ /* hw_rev[3:0] == GPE1[3:0] */
+ for (i = 0; i < 4; i++) {
+ s5p_gpio_cfg_pin(&gpio->e1, i, GPIO_INPUT);
+ s5p_gpio_set_pull(&gpio->e1, i, GPIO_PULL_NONE);
+ }
+
+ udelay(1);
+
+ for (i = 0; i < 4; i++)
+ hwrev |= (s5p_gpio_get_value(&gpio->e1, i) << i);
+
+ debug("hwrev 0x%x\n", hwrev);
+
+ return hwrev;
+}
+
+static void check_hw_revision(void)
+{
+ int hwrev;
+
+ hwrev = get_hw_revision();
+
+ board_rev |= hwrev;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ puts("Board:\tTRATS\n");
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ struct exynos4_gpio_part2 *gpio =
+ (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
+ int i, err;
+
+ /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
+ s5p_gpio_direction_output(&gpio->k0, 2, 1);
+ s5p_gpio_set_pull(&gpio->k0, 2, GPIO_PULL_NONE);
+
+ /*
+ * eMMC GPIO:
+ * SDR 8-bit@48MHz at MMC0
+ * GPK0[0] SD_0_CLK(2)
+ * GPK0[1] SD_0_CMD(2)
+ * GPK0[2] SD_0_CDn -> Not used
+ * GPK0[3:6] SD_0_DATA[0:3](2)
+ * GPK1[3:6] SD_0_DATA[0:3](3)
+ *
+ * DDR 4-bit@26MHz at MMC4
+ * GPK0[0] SD_4_CLK(3)
+ * GPK0[1] SD_4_CMD(3)
+ * GPK0[2] SD_4_CDn -> Not used
+ * GPK0[3:6] SD_4_DATA[0:3](3)
+ * GPK1[3:6] SD_4_DATA[4:7](4)
+ */
+ for (i = 0; i < 7; i++) {
+ if (i == 2)
+ continue;
+ /* GPK0[0:6] special function 2 */
+ s5p_gpio_cfg_pin(&gpio->k0, i, 0x2);
+ /* GPK0[0:6] pull disable */
+ s5p_gpio_set_pull(&gpio->k0, i, GPIO_PULL_NONE);
+ /* GPK0[0:6] drv 4x */
+ s5p_gpio_set_drv(&gpio->k0, i, GPIO_DRV_4X);
+ }
+
+ for (i = 3; i < 7; i++) {
+ /* GPK1[3:6] special function 3 */
+ s5p_gpio_cfg_pin(&gpio->k1, i, 0x3);
+ /* GPK1[3:6] pull disable */
+ s5p_gpio_set_pull(&gpio->k1, i, GPIO_PULL_NONE);
+ /* GPK1[3:6] drv 4x */
+ s5p_gpio_set_drv(&gpio->k1, i, GPIO_DRV_4X);
+ }
+
+ /*
+ * MMC device init
+ * mmc0 : eMMC (8-bit buswidth)
+ * mmc2 : SD card (4-bit buswidth)
+ */
+ err = s5p_mmc_init(0, 8);
+
+ /* T-flash detect */
+ s5p_gpio_cfg_pin(&gpio->x3, 4, 0xf);
+ s5p_gpio_set_pull(&gpio->x3, 4, GPIO_PULL_UP);
+
+ /*
+ * Check the T-flash detect pin
+ * GPX3[4] T-flash detect pin
+ */
+ if (!s5p_gpio_get_value(&gpio->x3, 4)) {
+ /*
+ * SD card GPIO:
+ * GPK2[0] SD_2_CLK(2)
+ * GPK2[1] SD_2_CMD(2)
+ * GPK2[2] SD_2_CDn -> Not used
+ * GPK2[3:6] SD_2_DATA[0:3](2)
+ */
+ for (i = 0; i < 7; i++) {
+ if (i == 2)
+ continue;
+ /* GPK2[0:6] special function 2 */
+ s5p_gpio_cfg_pin(&gpio->k2, i, 0x2);
+ /* GPK2[0:6] pull disable */
+ s5p_gpio_set_pull(&gpio->k2, i, GPIO_PULL_NONE);
+ /* GPK2[0:6] drv 4x */
+ s5p_gpio_set_drv(&gpio->k2, i, GPIO_DRV_4X);
+ }
+ err = s5p_mmc_init(2, 4);
+ }
+
+ return err;
+}
+#endif
+
+#ifdef CONFIG_USB_GADGET
+static int s5pc210_phy_control(int on)
+{
+ int ret = 0;
+ struct pmic *p = get_pmic();
+
+ if (pmic_probe(p))
+ return -1;
+
+ if (on) {
+ ret |= pmic_set_output(p,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+ MAX8998_SAFEOUT1, LDO_ON);
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
+ MAX8998_LDO3, LDO_ON);
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
+ MAX8998_LDO8, LDO_ON);
+
+ } else {
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
+ MAX8998_LDO8, LDO_OFF);
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
+ MAX8998_LDO3, LDO_OFF);
+ ret |= pmic_set_output(p,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+ MAX8998_SAFEOUT1, LDO_OFF);
+ }
+
+ if (ret) {
+ puts("MAX8998 LDO setting error!\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+struct s3c_plat_otg_data s5pc210_otg_data = {
+ .phy_control = s5pc210_phy_control,
+ .regs_phy = EXYNOS4_USBPHY_BASE,
+ .regs_otg = EXYNOS4_USBOTG_BASE,
+ .usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL,
+ .usb_flags = PHY0_SLEEP,
+};
+#endif
+
+static void pmic_reset(void)
+{
+ struct exynos4_gpio_part2 *gpio =
+ (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
+
+ s5p_gpio_direction_output(&gpio->x0, 7, 1);
+ s5p_gpio_set_pull(&gpio->x2, 7, GPIO_PULL_NONE);
+}
+
+static void board_clock_init(void)
+{
+ struct exynos4_clock *clk =
+ (struct exynos4_clock *)samsung_get_base_clock();
+
+ writel(CLK_SRC_CPU_VAL, (unsigned int)&clk->src_cpu);
+ writel(CLK_SRC_TOP0_VAL, (unsigned int)&clk->src_top0);
+ writel(CLK_SRC_FSYS_VAL, (unsigned int)&clk->src_fsys);
+ writel(CLK_SRC_PERIL0_VAL, (unsigned int)&clk->src_peril0);
+
+ writel(CLK_DIV_CPU0_VAL, (unsigned int)&clk->div_cpu0);
+ writel(CLK_DIV_CPU1_VAL, (unsigned int)&clk->div_cpu1);
+ writel(CLK_DIV_DMC0_VAL, (unsigned int)&clk->div_dmc0);
+ writel(CLK_DIV_DMC1_VAL, (unsigned int)&clk->div_dmc1);
+ writel(CLK_DIV_LEFTBUS_VAL, (unsigned int)&clk->div_leftbus);
+ writel(CLK_DIV_RIGHTBUS_VAL, (unsigned int)&clk->div_rightbus);
+ writel(CLK_DIV_TOP_VAL, (unsigned int)&clk->div_top);
+ writel(CLK_DIV_FSYS1_VAL, (unsigned int)&clk->div_fsys1);
+ writel(CLK_DIV_FSYS2_VAL, (unsigned int)&clk->div_fsys2);
+ writel(CLK_DIV_FSYS3_VAL, (unsigned int)&clk->div_fsys3);
+ writel(CLK_DIV_PERIL0_VAL, (unsigned int)&clk->div_peril0);
+ writel(CLK_DIV_PERIL3_VAL, (unsigned int)&clk->div_peril3);
+
+ writel(PLL_LOCKTIME, (unsigned int)&clk->apll_lock);
+ writel(PLL_LOCKTIME, (unsigned int)&clk->mpll_lock);
+ writel(PLL_LOCKTIME, (unsigned int)&clk->epll_lock);
+ writel(PLL_LOCKTIME, (unsigned int)&clk->vpll_lock);
+ writel(APLL_CON1_VAL, (unsigned int)&clk->apll_con1);
+ writel(APLL_CON0_VAL, (unsigned int)&clk->apll_con0);
+ writel(MPLL_CON1_VAL, (unsigned int)&clk->mpll_con1);
+ writel(MPLL_CON0_VAL, (unsigned int)&clk->mpll_con0);
+ writel(EPLL_CON1_VAL, (unsigned int)&clk->epll_con1);
+ writel(EPLL_CON0_VAL, (unsigned int)&clk->epll_con0);
+ writel(VPLL_CON1_VAL, (unsigned int)&clk->vpll_con1);
+ writel(VPLL_CON0_VAL, (unsigned int)&clk->vpll_con0);
+
+ writel(CLK_GATE_IP_CAM_VAL, (unsigned int)&clk->gate_ip_cam);
+ writel(CLK_GATE_IP_VP_VAL, (unsigned int)&clk->gate_ip_tv);
+ writel(CLK_GATE_IP_MFC_VAL, (unsigned int)&clk->gate_ip_mfc);
+ writel(CLK_GATE_IP_G3D_VAL, (unsigned int)&clk->gate_ip_g3d);
+ writel(CLK_GATE_IP_IMAGE_VAL, (unsigned int)&clk->gate_ip_image);
+ writel(CLK_GATE_IP_LCD0_VAL, (unsigned int)&clk->gate_ip_lcd0);
+ writel(CLK_GATE_IP_LCD1_VAL, (unsigned int)&clk->gate_ip_lcd1);
+ writel(CLK_GATE_IP_FSYS_VAL, (unsigned int)&clk->gate_ip_fsys);
+ writel(CLK_GATE_IP_GPS_VAL, (unsigned int)&clk->gate_ip_gps);
+ writel(CLK_GATE_IP_PERIL_VAL, (unsigned int)&clk->gate_ip_peril);
+ writel(CLK_GATE_IP_PERIR_VAL, (unsigned int)&clk->gate_ip_perir);
+ writel(CLK_GATE_BLOCK_VAL, (unsigned int)&clk->gate_block);
+}
+
+static void board_watchdog_disable(void)
+{
+ struct exynos4_watchdog *wd =
+ (struct exynos4_watchdog *)samsung_get_base_watchdog();
+
+ writel(~(WTCON_EN | WTCON_INT), (unsigned int)&wd->wtcon);
+}
+
+static void board_power_init(void)
+{
+ struct exynos4_power *pwr =
+ (struct exynos4_power *)samsung_get_base_power();
+
+ /* PS HOLD */
+ writel(EXYNOS4_PS_HOLD_CON_VAL, (unsigned int)&pwr->ps_hold_control);
+
+ /* Set power down */
+ writel(0, (unsigned int)&pwr->cam_configuration);
+ writel(0, (unsigned int)&pwr->tv_configuration);
+ writel(0, (unsigned int)&pwr->mfc_configuration);
+ writel(0, (unsigned int)&pwr->g3d_configuration);
+ writel(0, (unsigned int)&pwr->lcd1_configuration);
+ writel(0, (unsigned int)&pwr->gps_configuration);
+ writel(0, (unsigned int)&pwr->gps_alive_configuration);
+}
+
+static void board_uart_init(void)
+{
+ struct exynos4_gpio_part1 *gpio1 =
+ (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
+ struct exynos4_gpio_part2 *gpio2 =
+ (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
+ int i;
+
+ /* UART0-UART1 GPIOs (part1) : 0x22222222 */
+ for (i = 0; i < 7; i++) {
+ s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE);
+ s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2));
+ }
+
+ /*
+ * UART2-UART3 GPIOs (part2) : 0x00223322
+ * GPA1CON[3] = I2C_3_SCL (3)
+ * GPA1CON[2] = I2C_3_SDA (3)
+ */
+ for (i = 0; i < 5; i++) {
+ s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
+ s5p_gpio_cfg_pin(&gpio1->a1, i,
+ GPIO_FUNC((i == 2 || i == 3) ? 0x3 : 0x2));
+ }
+
+ /* UART_SEL GPY4[7] (part2) at EXYNOS4 */
+ s5p_gpio_set_pull(&gpio2->y4, 7, GPIO_PULL_UP);
+ s5p_gpio_direction_output(&gpio2->y4, 7, 1);
+}
+
+int board_early_init_f(void)
+{
+ board_watchdog_disable();
+
+ pmic_reset();
+ board_clock_init();
+ board_uart_init();
+ board_power_init();
+
+ return 0;
+}