ColdFire: Add M54455EVB for MCF5445x
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile
new file mode 100644
index 0000000..ca9a772
--- /dev/null
+++ b/board/freescale/m54455evb/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o flash.o mii.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
\ No newline at end of file
diff --git a/board/freescale/m54455evb/config.mk b/board/freescale/m54455evb/config.mk
new file mode 100644
index 0000000..ce014ed
--- /dev/null
+++ b/board/freescale/m54455evb/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0
diff --git a/board/freescale/m54455evb/flash.c b/board/freescale/m54455evb/flash.c
new file mode 100644
index 0000000..de2cca8
--- /dev/null
+++ b/board/freescale/m54455evb/flash.c
@@ -0,0 +1,974 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <asm/immap.h>
+
+#ifndef CFG_FLASH_CFI
+typedef unsigned char FLASH_PORT_WIDTH;
+typedef volatile unsigned char FLASH_PORT_WIDTHV;
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+#define CFG_FLASH_NONCFI_WIDTH FLASH_CFI_8BIT
+
+/* Intel-compatible flash commands */
+#define INTEL_PROGRAM 0x00100010
+#define INTEL_ERASE 0x00200020
+#define INTEL_WRSETUP 0x00400040
+#define INTEL_CLEAR 0x00500050
+#define INTEL_LOCKBIT 0x00600060
+#define INTEL_PROTECT 0x00010001
+#define INTEL_STATUS 0x00700070
+#define INTEL_READID 0x00900090
+#define INTEL_CFIQRY 0x00980098
+#define INTEL_SUSERASE 0x00B000B0
+#define INTEL_PROTPROG 0x00C000C0
+#define INTEL_CONFIRM 0x00D000D0
+#define INTEL_WRBLK 0x00e800e8
+#define INTEL_RESET 0x00FF00FF
+
+/* Intel-compatible flash status bits */
+#define INTEL_FINISHED 0x00800080
+#define INTEL_OK 0x00800080
+#define INTEL_ERASESUS 0x00600060
+#define INTEL_WSM_SUS (INTEL_FINISHED | INTEL_ERASESUS)
+
+/* 28F160C3B CFI Data offset - This could vary */
+#define INTEL_CFI_MFG 0x00 /* Manufacturer ID */
+#define INTEL_CFI_PART 0x01 /* Product ID */
+#define INTEL_CFI_LOCK 0x02 /* */
+#define INTEL_CFI_TWPRG 0x1F /* Typical Single Word Program Timeout 2^n us */
+#define INTEL_CFI_MBUFW 0x20 /* Typical Max Buffer Write Timeout 2^n us */
+#define INTEL_CFI_TERB 0x21 /* Typical Block Erase Timeout 2^n ms */
+#define INTEL_CFI_MWPRG 0x23 /* Maximum Word program timeout 2^n us */
+#define INTEL_CFI_MERB 0x25 /* Maximum Block Erase Timeout 2^n s */
+#define INTEL_CFI_SIZE 0x27 /* Device size 2^n bytes */
+#define INTEL_CFI_CAP 0x28
+#define INTEL_CFI_WRBUF 0x2A
+#define INTEL_CFI_BANK 0x2C /* Number of Bank */
+#define INTEL_CFI_BLK1A 0x2D /* Number of Blocks */
+#define INTEL_CFI_BLK1B 0x2E /* Number of Blocks */
+#define INTEL_CFI_SZ1A 0x2F /* Block Region Size */
+#define INTEL_CFI_SZ1B 0x30
+#define INTEL_CFI_BLK2A 0x31
+#define INTEL_CFI_BLK2B 0x32
+#define INTEL_CFI_SZ2A 0x33
+#define INTEL_CFI_SZ2B 0x34
+
+#define FLASH_CYCLE1 0x0555
+#define FLASH_CYCLE2 0x0aaa
+
+#define WR_BLOCK 0x20
+
+/* not in the flash.h yet */
+#define FLASH_28F64P30T 0x00B9 /* Intel 28F64P30T ( 64M) */
+#define FLASH_28F64P30B 0x00BA /* Intel 28F64P30B ( 64M) */
+#define FLASH_28F128P30T 0x00BB /* Intel 28F128P30T ( 128M = 8M x 16 ) */
+#define FLASH_28F128P30B 0x00BC /* Intel 28F128P30B ( 128M = 8M x 16 ) */
+#define FLASH_28F256P30T 0x00BD /* Intel 28F256P30T ( 256M = 16M x 16 ) */
+#define FLASH_28F256P30B 0x00BE /* Intel 28F256P30B ( 256M = 16M x 16 ) */
+
+#define SYNC __asm__("nop")
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+ulong flash_get_size(FPWV * addr, flash_info_t * info);
+int flash_get_offsets(ulong base, flash_info_t * info);
+int flash_cmd_rd(volatile u16 * addr, int index);
+int write_data(flash_info_t * info, ulong dest, FPW data);
+int write_data_block(flash_info_t * info, ulong src, ulong dest);
+int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data);
+void inline spin_wheel(void);
+void flash_sync_real_protect(flash_info_t * info);
+uchar intel_sector_protected(flash_info_t * info, ushort sector);
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+ulong flash_init(void)
+{
+ int i;
+ ulong size = 0;
+ ulong fbase = 0;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ memset(&flash_info[i], 0, sizeof(flash_info_t));
+
+ switch (i) {
+ case 0:
+ fbase = (ulong) CFG_FLASH0_BASE;
+ break;
+ case 1:
+ fbase = (ulong) CFG_FLASH1_BASE;
+ break;
+ }
+
+ flash_get_size((FPWV *) fbase, &flash_info[i]);
+ flash_get_offsets((ulong) fbase, &flash_info[i]);
+ fbase += flash_info[i].size;
+ size += flash_info[i].size;
+
+ /* get the h/w and s/w protection status in sync */
+ flash_sync_real_protect(&flash_info[i]);
+ }
+
+ /* Protect monitor and environment sectors */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
+
+ return size;
+}
+
+int flash_get_offsets(ulong base, flash_info_t * info)
+{
+ int i, j, k;
+ int sectors, bs, banks;
+ ulong start;
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_ATM) {
+ int sect[] = CFG_ATMEL_SECT;
+ int sectsz[] = CFG_ATMEL_SECTSZ;
+
+ info->start[0] = base;
+ for (k = 0, i = 0; i < CFG_ATMEL_REGION; i++) {
+ for (j = 0; j < sect[i]; j++, k++) {
+ info->start[k + 1] = info->start[k] + sectsz[i];
+ info->protect[k] = 0;
+ }
+ }
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ volatile u16 *addr16 = (volatile u16 *)base;
+
+ *addr16 = (FPW) INTEL_RESET; /* restore read mode */
+ *addr16 = (FPW) INTEL_READID;
+
+ banks = addr16[INTEL_CFI_BANK] & 0xff;
+
+ sectors = 0;
+ info->start[0] = base;
+
+ for (k = 0, i = 0; i < banks; i++) {
+ /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec.
+ * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count
+ * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count
+ */
+ bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8)
+ | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) *
+ 0x100);
+ sectors =
+ (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1;
+
+ for (j = 0; j < sectors; j++, k++) {
+ info->start[k + 1] = info->start[k] + bs;
+ }
+ }
+
+ *addr16 = (FPW) INTEL_RESET; /* restore read mode */
+ }
+
+ return ERR_OK;
+}
+
+void flash_print_info(flash_info_t * info)
+{
+ int i;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL:
+ printf("INTEL ");
+ break;
+ case FLASH_MAN_ATM:
+ printf("ATMEL ");
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AT040:
+ printf("AT49BV040A\n");
+ break;
+ case FLASH_28F128J3A:
+ printf("Intel 28F128J3A\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ return;
+ }
+
+ if (info->size > 0x100000) {
+ int remainder;
+
+ printf(" Size: %ld", info->size >> 20);
+
+ remainder = (info->size % 0x100000);
+ if (remainder) {
+ remainder >>= 10;
+ remainder = (int)((float)
+ (((float)remainder / (float)1024) *
+ 10000));
+ printf(".%d ", remainder);
+ }
+
+ printf("MB in %d Sectors\n", info->sector_count);
+ } else
+ printf(" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf("\n ");
+ printf(" %08lX%s",
+ info->start[i], info->protect[i] ? " (RO)" : " ");
+ }
+ printf("\n");
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+ulong flash_get_size(FPWV * addr, flash_info_t * info)
+{
+ volatile u16 *addr16 = (volatile u16 *)addr;
+ int intel = 0, banks = 0;
+ u16 value;
+ int i;
+
+ addr[FLASH_CYCLE1] = (FPWV) 0x00AA00AA; /* for Atmel, Intel ignores this */
+ addr[FLASH_CYCLE2] = (FPWV) 0x00550055; /* for Atmel, Intel ignores this */
+ addr[FLASH_CYCLE1] = (FPWV) 0x00900090; /* selects Intel or Atmel */
+
+ switch (addr[0] & 0xff) {
+ case (u8) ATM_MANUFACT:
+ info->flash_id = FLASH_MAN_ATM;
+ value = addr[1];
+ break;
+ case (u8) INTEL_MANUFACT:
+ /* Terminate Atmel ID read */
+ addr[0] = (FPWV) 0x00F000F0;
+ /* Write auto select command: read Manufacturer ID */
+ /* Write auto select command sequence and test FLASH answer */
+ *addr16 = (FPW) INTEL_RESET; /* restore read mode */
+ *addr16 = (FPW) INTEL_READID;
+
+ info->flash_id = FLASH_MAN_INTEL;
+ value = (addr16[INTEL_CFI_MFG] << 8);
+ value |= addr16[INTEL_CFI_PART] & 0xff;
+ intel = 1;
+ break;
+ default:
+ printf("Unknown Flash\n");
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+
+ *addr = (FPW) 0x00F000F0;
+ *addr = (FPW) INTEL_RESET; /* restore read mode */
+ return (0); /* no or unknown flash */
+ }
+
+ switch (value) {
+ case (u8) ATM_ID_LV040:
+ info->flash_id += FLASH_AT040;
+ break;
+ case (u16) INTEL_ID_28F128J3:
+ info->flash_id += FLASH_28F128J3A;
+ break;
+ case (u16) INTEL_ID_28F64P30T:
+ info->flash_id += FLASH_28F64P30T;
+ break;
+ case (u16) INTEL_ID_28F64P30B:
+ info->flash_id += FLASH_28F64P30B;
+ break;
+ case (u16) INTEL_ID_28F128P30T:
+ info->flash_id += FLASH_28F128P30T;
+ break;
+ case (u16) INTEL_ID_28F128P30B:
+ info->flash_id += FLASH_28F128P30B;
+ break;
+ case (u16) INTEL_ID_28F256P30T:
+ info->flash_id += FLASH_28F256P30T;
+ break;
+ case (u16) INTEL_ID_28F256P30B:
+ info->flash_id += FLASH_28F256P30B;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ if (intel) {
+ /* Intel spec. under CFI section */
+ u32 sz;
+ int sectors, bs;
+
+ banks = addr16[INTEL_CFI_BANK] & 0xff;
+
+ sectors = sz = 0;
+ for (i = 0; i < banks; i++) {
+ /* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec.
+ * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count
+ * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count
+ */
+ bs = ((((addr16[INTEL_CFI_SZ1B + (i * 4)] & 0xff) << 8)
+ | (addr16[INTEL_CFI_SZ1A + (i * 4)] & 0xff)) *
+ 0x100);
+ sectors +=
+ (addr16[INTEL_CFI_BLK1A + (i * 4)] & 0xff) + 1;
+ sz += (bs * sectors);
+ }
+
+ info->sector_count = sectors;
+ info->size = sz;
+ *addr = (FPW) INTEL_RESET; /* restore read mode */
+ } else {
+ int sect[] = CFG_ATMEL_SECT;
+ int sectsz[] = CFG_ATMEL_SECTSZ;
+
+ info->sector_count = 0;
+ info->size = 0;
+ for (i = 0; i < CFG_ATMEL_REGION; i++) {
+ info->sector_count += sect[i];
+ info->size += sect[i] * sectsz[i];
+ }
+
+ /* reset ID mode */
+ addr[0] = (FPWV) 0x00F000F0;
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ return (info->size);
+}
+
+int flash_cmd_rd(volatile u16 * addr, int index)
+{
+ return (int)addr[index];
+}
+
+/*
+ * This function gets the u-boot flash sector protection status
+ * (flash_info_t.protect[]) in sync with the sector protection
+ * status stored in hardware.
+ */
+void flash_sync_real_protect(flash_info_t * info)
+{
+ int i;
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F160C3B:
+ case FLASH_28F160C3T:
+ case FLASH_28F320C3B:
+ case FLASH_28F320C3T:
+ case FLASH_28F640C3B:
+ case FLASH_28F640C3T:
+ for (i = 0; i < info->sector_count; ++i) {
+ info->protect[i] = intel_sector_protected(info, i);
+ }
+ break;
+ default:
+ /* no h/w protect support */
+ break;
+ }
+}
+
+/*
+ * checks if "sector" in bank "info" is protected. Should work on intel
+ * strata flash chips 28FxxxJ3x in 8-bit mode.
+ * Returns 1 if sector is protected (or timed-out while trying to read
+ * protection status), 0 if it is not.
+ */
+uchar intel_sector_protected(flash_info_t * info, ushort sector)
+{
+ FPWV *addr;
+ FPWV *lock_conf_addr;
+ ulong start;
+ unsigned char ret;
+
+ /*
+ * first, wait for the WSM to be finished. The rationale for
+ * waiting for the WSM to become idle for at most
+ * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+ * because of: (1) erase, (2) program or (3) lock bit
+ * configuration. So we just wait for the longest timeout of
+ * the (1)-(3), i.e. the erase timeout.
+ */
+
+ /* wait at least 35ns (W12) before issuing Read Status Register */
+ /*udelay(1); */
+ addr = (FPWV *) info->start[sector];
+ *addr = (FPW) INTEL_STATUS;
+
+ start = get_timer(0);
+ while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
+ if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) {
+ *addr = (FPW) INTEL_RESET; /* restore read mode */
+ printf("WSM busy too long, can't get prot status\n");
+ return 1;
+ }
+ }
+
+ /* issue the Read Identifier Codes command */
+ *addr = (FPW) INTEL_READID;
+
+ /* Intel example code uses offset of 4 for 8-bit flash */
+ lock_conf_addr = (FPWV *) info->start[sector];
+ ret = (lock_conf_addr[INTEL_CFI_LOCK] & (FPW) INTEL_PROTECT) ? 1 : 0;
+
+ /* put flash back in read mode */
+ *addr = (FPW) INTEL_RESET;
+
+ return ret;
+}
+
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong type, start, last;
+ int rcode = 0, intel = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN)
+ printf("- missing\n");
+ else
+ printf("- no sectors to erase\n");
+ return 1;
+ }
+
+ type = (info->flash_id & FLASH_VENDMASK);
+
+ if (type != (FLASH_MAN_INTEL & FLASH_VENDMASK)) {
+ if (type != (FLASH_MAN_ATM & FLASH_VENDMASK)) {
+ type = (info->flash_id & FLASH_VENDMASK);
+ printf
+ ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+ }
+
+ if (type == FLASH_MAN_INTEL)
+ intel = 1;
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot)
+ printf("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ else
+ printf("\n");
+
+ start = get_timer(0);
+ last = start;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+
+ FPWV *addr = (FPWV *) (info->start[sect]);
+ int min = 0;
+
+ printf(".");
+
+ /* arm simple, non interrupt dependent timer */
+ start = get_timer(0);
+
+ if (intel) {
+ *addr = (FPW) INTEL_READID;
+ min = addr[INTEL_CFI_TERB] & 0xff;
+ min = 1 << min; /* ms */
+ min = (min / info->sector_count) * 1000;
+
+ /* start erase block */
+ *addr = (FPW) INTEL_CLEAR; /* clear status register */
+ *addr = (FPW) INTEL_ERASE; /* erase setup */
+ *addr = (FPW) INTEL_CONFIRM; /* erase confirm */
+
+ while ((*addr & (FPW) INTEL_FINISHED) !=
+ (FPW) INTEL_FINISHED) {
+
+ if (get_timer(start) >
+ CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ *addr = (FPW) INTEL_SUSERASE; /* suspend erase */
+ *addr = (FPW) INTEL_RESET; /* reset to read mode */
+
+ rcode = 1;
+ break;
+ }
+ }
+
+ *addr = (FPW) INTEL_RESET; /* resest to read mode */
+ } else {
+ FPWV *base; /* first address in bank */
+ FPWV *atmeladdr;
+
+ flag = disable_interrupts();
+
+ atmeladdr = (FPWV *) addr; /* concatenate to 8 bit */
+ base = (FPWV *) (CFG_ATMEL_BASE); /* First sector */
+
+ base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */
+ base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */
+ base[FLASH_CYCLE1] = (u8) 0x00800080; /* erase mode */
+ base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */
+ base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */
+ *atmeladdr = (u8) 0x00300030; /* erase sector */
+
+ if (flag)
+ enable_interrupts();
+
+ while ((*atmeladdr & (u8) 0x00800080) !=
+ (u8) 0x00800080) {
+ if (get_timer(start) >
+ CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */
+
+ rcode = 1;
+ break;
+ }
+ }
+
+ *atmeladdr = (u8) 0x00F000F0; /* reset to read mode */
+ } /* Atmel or Intel */
+ }
+ }
+ printf(" done\n");
+
+ return rcode;
+}
+
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ if (info->flash_id == FLASH_UNKNOWN)
+ return 4;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_ATM:
+ {
+ u16 data = 0;
+ int bytes; /* number of bytes to program in current word */
+ int left; /* number of bytes left to program */
+ int i, res;
+
+ for (left = cnt, res = 0;
+ left > 0 && res == 0;
+ addr += sizeof(data), left -=
+ sizeof(data) - bytes) {
+
+ bytes = addr & (sizeof(data) - 1);
+ addr &= ~(sizeof(data) - 1);
+
+ /* combine source and destination data so can program
+ * an entire word of 16 or 32 bits
+ */
+ for (i = 0; i < sizeof(data); i++) {
+ data <<= 8;
+ if (i < bytes || i - bytes >= left)
+ data += *((uchar *) addr + i);
+ else
+ data += *src++;
+ }
+
+ data = (data >> 8) | (data << 8);
+ res = write_word_atm(info, (FPWV *) addr, data);
+ }
+ return res;
+ } /* case FLASH_MAN_ATM */
+
+ case FLASH_MAN_INTEL:
+ {
+ ulong cp, wp;
+ u16 data;
+ int count, i, l, rc, port_width;
+
+ /* get lower word aligned address */
+ wp = addr;
+ port_width = sizeof(FPW);
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ for (; i < port_width && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+
+ for (; cnt == 0 && i < port_width; ++i, ++cp)
+ data = (data << 8) | (*(uchar *) cp);
+
+ if ((rc = write_data(info, wp, data)) != 0)
+ return (rc);
+
+ wp += port_width;
+ }
+
+ if (cnt > WR_BLOCK) {
+ /*
+ * handle word aligned part
+ */
+ count = 0;
+ while (cnt >= WR_BLOCK) {
+
+ if ((rc =
+ write_data_block(info,
+ (ulong) src,
+ wp)) != 0)
+ return (rc);
+
+ wp += WR_BLOCK;
+ src += WR_BLOCK;
+ cnt -= WR_BLOCK;
+
+ if (count++ > 0x800) {
+ spin_wheel();
+ count = 0;
+ }
+ }
+ }
+
+ /* handle word aligned part */
+ if (cnt < WR_BLOCK) {
+ /*
+ * handle word aligned part
+ */
+ count = 0;
+ while (cnt >= port_width) {
+ data = 0;
+ for (i = 0; i < port_width; ++i)
+ data = (data << 8) | *src++;
+
+ if ((rc =
+ write_data(info,
+ (ulong) ((FPWV *) wp),
+ (FPW) (data))) != 0)
+ return (rc);
+
+ wp += port_width;
+ cnt -= port_width;
+ if (count++ > 0x800) {
+ spin_wheel();
+ count = 0;
+ }
+ }
+ }
+
+ if (cnt == 0)
+ return ERR_OK;
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < port_width && cnt > 0;
+ ++i, ++cp) {
+ data = (data << 8) | (*src++);
+ --cnt;
+ }
+ for (; i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return write_data(info, (ulong) ((FPWV *) wp),
+ (FPW) data);
+
+ } /* case FLASH_MAN_INTEL */
+
+ } /* switch */
+
+ return ERR_OK;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_data_block(flash_info_t * info, ulong src, ulong dest)
+{
+ FPWV *srcaddr = (FPWV *) src;
+ FPWV *dstaddr = (FPWV *) dest;
+ ulong start;
+ int flag, i;
+
+ /* Check if Flash is (sufficiently) erased */
+ for (i = 0; i < WR_BLOCK; i++)
+ if ((*dstaddr++ & 0xff) != 0xff) {
+ printf("not erased at %08lx (%lx)\n",
+ (ulong) dstaddr, *dstaddr);
+ return (2);
+ }
+
+ dstaddr = (FPWV *) dest;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *dstaddr = (FPW) INTEL_WRBLK; /* write block setup */
+
+ if (flag)
+ enable_interrupts();
+
+ /* arm simple, non interrupt dependent timer */
+ start = get_timer(0);
+
+ /* wait while polling the status register */
+ while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *dstaddr = (FPW) INTEL_RESET; /* restore read mode */
+ return (1);
+ }
+ }
+
+ *dstaddr = (FPW) WR_BLOCK - 1; /* write 32 to buffer */
+ for (i = 0; i < WR_BLOCK; i++)
+ *dstaddr++ = *srcaddr++;
+
+ dstaddr -= 1;
+ *dstaddr = (FPW) INTEL_CONFIRM; /* write 32 to buffer */
+
+ /* arm simple, non interrupt dependent timer */
+ start = get_timer(0);
+
+ /* wait while polling the status register */
+ while ((*dstaddr & (FPW) INTEL_FINISHED) != (FPW) INTEL_OK) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *dstaddr = (FPW) INTEL_RESET; /* restore read mode */
+ return (1);
+ }
+ }
+
+ *dstaddr = (FPW) INTEL_RESET; /* restore read mode */
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_data(flash_info_t * info, ulong dest, FPW data)
+{
+ FPWV *addr = (FPWV *) dest;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ printf("not erased at %08lx (%lx)\n", (ulong) addr,
+ (ulong) * addr);
+ return (2);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = (int)disable_interrupts();
+
+ *addr = (FPW) INTEL_CLEAR;
+ *addr = (FPW) INTEL_RESET;
+
+ *addr = (FPW) INTEL_WRSETUP; /* write setup */
+ *addr = data;
+
+ if (flag)
+ enable_interrupts();
+
+ /* arm simple, non interrupt dependent timer */
+ start = get_timer(0);
+
+ /* wait while polling the status register */
+ while ((*addr & (FPW) INTEL_OK) != (FPW) INTEL_OK) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW) INTEL_SUSERASE; /* suspend mode */
+ *addr = (FPW) INTEL_CLEAR; /* clear status */
+ *addr = (FPW) INTEL_RESET; /* reset */
+ return (1);
+ }
+ }
+
+ *addr = (FPW) INTEL_CLEAR; /* clear status */
+ *addr = (FPW) INTEL_RESET; /* restore read mode */
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash for ATMEL FLASH
+ * A word is 16 bits, whichever the bus width of the flash bank
+ * (not an individual chip) is.
+ *
+ * returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_word_atm(flash_info_t * info, volatile u8 * dest, u16 data)
+{
+ ulong start;
+ int flag, i;
+ int res = 0; /* result, assume success */
+ FPWV *base; /* first address in flash bank */
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((volatile u16 *)dest) & data) != data) {
+ return (2);
+ }
+
+ base = (FPWV *) (CFG_ATMEL_BASE);
+
+ for (i = 0; i < sizeof(u16); i++) {
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */
+ base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */
+ base[FLASH_CYCLE1] = (u8) 0x00A000A0; /* selects program mode */
+
+ *dest = data; /* start programming the data */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer(0);
+
+ /* data polling for D7 */
+ while (res == 0
+ && (*dest & (u8) 0x00800080) !=
+ (data & (u8) 0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *dest = (u8) 0x00F000F0; /* reset bank */
+ res = 1;
+ }
+ }
+
+ *dest++ = (u8) 0x00F000F0; /* reset bank */
+ data >>= 8;
+ }
+
+ return (res);
+}
+
+void inline spin_wheel(void)
+{
+ static int p = 0;
+ static char w[] = "\\/-";
+
+ printf("\010%c", w[p]);
+ (++p == 3) ? (p = 0) : 0;
+}
+
+#ifdef CFG_FLASH_PROTECTION
+/*-----------------------------------------------------------------------
+ */
+int flash_real_protect(flash_info_t * info, long sector, int prot)
+{
+ int rcode = 0; /* assume success */
+ FPWV *addr; /* address of sector */
+ FPW value;
+
+ addr = (FPWV *) (info->start[sector]);
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F160C3B:
+ case FLASH_28F160C3T:
+ case FLASH_28F320C3B:
+ case FLASH_28F320C3T:
+ case FLASH_28F640C3B:
+ case FLASH_28F640C3T:
+ *addr = (FPW) INTEL_RESET; /* make sure in read mode */
+ *addr = (FPW) INTEL_LOCKBIT; /* lock command setup */
+
+ if (prot)
+ *addr = (FPW) INTEL_PROTECT; /* lock sector */
+ else
+ *addr = (FPW) INTEL_CONFIRM; /* unlock sector */
+
+ /* now see if it really is locked/unlocked as requested */
+ *addr = (FPW) INTEL_READID;
+
+ /* read sector protection at sector address, (A7 .. A0) = 0x02.
+ * D0 = 1 for each device if protected.
+ * If at least one device is protected the sector is marked
+ * protected, but return failure. Mixed protected and
+ * unprotected devices within a sector should never happen.
+ */
+ value = addr[2] & (FPW) INTEL_PROTECT;
+ if (value == 0)
+ info->protect[sector] = 0;
+ else if (value == (FPW) INTEL_PROTECT)
+ info->protect[sector] = 1;
+ else {
+ /* error, mixed protected and unprotected */
+ rcode = 1;
+ info->protect[sector] = 1;
+ }
+ if (info->protect[sector] != prot)
+ rcode = 1; /* failed to protect/unprotect as requested */
+
+ /* reload all protection bits from hardware for now */
+ flash_sync_real_protect(info);
+ break;
+
+ default:
+ /* no hardware protect that we support */
+ info->protect[sector] = prot;
+ break;
+ }
+
+ return rcode;
+}
+#endif
+#endif
diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c
new file mode 100644
index 0000000..1411a1a
--- /dev/null
+++ b/board/freescale/m54455evb/m54455evb.c
@@ -0,0 +1,165 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ puts("Board: ");
+ puts("Freescale M54455 EVB\n");
+ return 0;
+};
+
+long int initdram(int board_type)
+{
+ volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
+ volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
+ u32 dramsize, i;
+
+ dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1;
+
+ for (i = 0x13; i < 0x20; i++) {
+ if (dramsize == (1 << i))
+ break;
+ }
+ i--;
+
+ gpio->mscr_sdram = 0xAA;
+
+ sdram->sdcs0 = (CFG_SDRAM_BASE | i);
+ sdram->sdcs1 = (CFG_SDRAM_BASE1 | i);
+
+ sdram->sdcfg1 = CFG_SDRAM_CFG1;
+ sdram->sdcfg2 = CFG_SDRAM_CFG2;
+
+ /* Issue PALL */
+ sdram->sdcr = CFG_SDRAM_CTRL | 2;
+
+ /* Issue LEMR */
+ sdram->sdmr = CFG_SDRAM_EMOD | 0x408;
+ sdram->sdmr = CFG_SDRAM_MODE | 0x300;
+
+ udelay(500);
+
+ /* Issue PALL */
+ sdram->sdcr = CFG_SDRAM_CTRL | 2;
+
+ /* Perform two refresh cycles */
+ sdram->sdcr = CFG_SDRAM_CTRL | 4;
+ sdram->sdcr = CFG_SDRAM_CTRL | 4;
+
+ sdram->sdmr = CFG_SDRAM_MODE | 0x200;
+
+ sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+
+ udelay(100);
+
+ return (dramsize << 1);
+};
+
+int testdram(void)
+{
+ /* TODO: XXX XXX XXX */
+ printf("DRAM test not implemented!\n");
+
+ return (0);
+}
+
+#if defined(CONFIG_CMD_IDE)
+#include <ata.h>
+
+int ide_preinit(void)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+ gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_MASK) | 0x10;
+ gpio->par_feci2c |=
+ (gpio->par_feci2c & 0xF0FF) | (GPIO_PAR_FECI2C_MDC1_ATA_DIOR |
+ GPIO_PAR_FECI2C_MDIO1_ATA_DIOW);
+ gpio->par_ata |=
+ (GPIO_PAR_ATA_BUFEN | GPIO_PAR_ATA_CS1 | GPIO_PAR_ATA_CS0 |
+ GPIO_PAR_ATA_DA2 | GPIO_PAR_ATA_DA1 | GPIO_PAR_ATA_DA0
+ | GPIO_PAR_ATA_RESET_RESET | GPIO_PAR_ATA_DMARQ_DMARQ |
+ GPIO_PAR_ATA_IORDY_IORDY);
+ gpio->par_pci |=
+ (GPIO_PAR_PCI_GNT3_ATA_DMACK | GPIO_PAR_PCI_REQ3_ATA_INTRQ);
+
+ return (0);
+}
+
+void ide_set_reset(int idereset)
+{
+ volatile atac_t *ata = (atac_t *) MMAP_ATA;
+ long period;
+ /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */
+ int piotms[5][9] = {
+ {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */
+ {50, 125, 45, 20, 35, 5, 15, 0, 35}, /* PIO 1 */
+ {30, 100, 30, 15, 20, 5, 10, 0, 35}, /* PIO 2 */
+ {30, 80, 30, 10, 20, 5, 10, 0, 35}, /* PIO 3 */
+ {25, 70, 20, 10, 20, 5, 10, 0, 35}
+ }; /* PIO 4 */
+
+ if (idereset) {
+ ata->cr = 0; /* control reset */
+ udelay(10000);
+ } else {
+#define CALC_TIMING(t) (t + period - 1) / period
+ period = 1000000000 / gd->bus_clk; /* period in ns */
+
+ /*ata->ton = CALC_TIMING (180); */
+ ata->t1 = CALC_TIMING(piotms[2][0]);
+ ata->t2w = CALC_TIMING(piotms[2][1]);
+ ata->t2r = CALC_TIMING(piotms[2][1]);
+ ata->ta = CALC_TIMING(piotms[2][8]);
+ ata->trd = CALC_TIMING(piotms[2][7]);
+ ata->t4 = CALC_TIMING(piotms[2][3]);
+ ata->t9 = CALC_TIMING(piotms[2][6]);
+
+ ata->cr = 0x40; /* IORDY enable */
+ udelay(200000);
+ ata->cr |= 0x01; /* IORDY enable */
+ }
+}
+#endif
+
+#if defined(CONFIG_PCI)
+/*
+ * Initialize PCI devices, report devices found.
+ */
+static struct pci_controller hose;
+extern void pci_mcf5445x_init(struct pci_controller *hose);
+
+void pci_init_board(void)
+{
+ pci_mcf5445x_init(&hose);
+}
+#endif /* CONFIG_PCI */
+
diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c
new file mode 100644
index 0000000..c067183
--- /dev/null
+++ b/board/freescale/m54455evb/mii.c
@@ -0,0 +1,320 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fec.h>
+#include <asm/immap.h>
+
+#include <config.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#undef MII_DEBUG
+#undef ET_DEBUG
+
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+ struct fec_info_s *info = (struct fec_info_s *)dev->priv;
+
+ if (setclear) {
+ gpio->par_feci2c |=
+ (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
+
+ if (info->iobase == CFG_FEC0_IOBASE)
+ gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO;
+ else
+ gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA;
+ } else {
+ gpio->par_feci2c &=
+ ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
+
+ if (info->iobase == CFG_FEC0_IOBASE)
+ gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
+ else
+ gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
+ }
+ return 0;
+}
+
+#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+
+/* Make MII read/write commands for the FEC. */
+#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
+
+/* PHY identification */
+#define PHY_ID_LXT970 0x78100000 /* LXT970 */
+#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
+#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
+#define PHY_ID_QS6612 0x01814400 /* QS6612 */
+#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
+#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
+#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
+#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */
+#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */
+
+#define STR_ID_LXT970 "LXT970"
+#define STR_ID_LXT971 "LXT971"
+#define STR_ID_82555 "Intel82555"
+#define STR_ID_QS6612 "QS6612"
+#define STR_ID_AMD79C784 "AMD79C784"
+#define STR_ID_LSI80225 "LSI80225"
+#define STR_ID_LSI80225B "LSI80225/B"
+#define STR_ID_DP83848VV "N83848"
+#define STR_ID_DP83849 "N83849"
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_reset(struct fec_info_s *info)
+{
+ volatile fec_t *fecp = (fec_t *) (info->miibase);
+ struct eth_device *dev;
+ int i, miispd;
+ u16 rst = 0;
+
+ dev = eth_get_dev();
+
+ miispd = (gd->bus_clk / 1000000) / 5;
+ fecp->mscr = miispd << 1;
+
+ miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET);
+ for (i = 0; i < FEC_RESET_DELAY; ++i) {
+ udelay(500);
+ miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst);
+ if ((rst & PHY_BMCR_RESET) == 0)
+ break;
+ }
+ if (i == FEC_RESET_DELAY)
+ printf("Mii reset timeout %d\n", i);
+}
+
+/* send command to phy using mii, wait for result */
+uint mii_send(uint mii_cmd)
+{
+ struct fec_info_s *info;
+ struct eth_device *dev;
+ volatile fec_t *ep;
+ uint mii_reply;
+ int j = 0;
+
+ /* retrieve from register structure */
+ dev = eth_get_dev();
+ info = dev->priv;
+
+ ep = (fec_t *) info->miibase;
+
+ ep->mmfr = mii_cmd; /* command to phy */
+
+ /* wait for mii complete */
+ while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
+ udelay(1);
+ j++;
+ }
+ if (j >= MCFFEC_TOUT_LOOP) {
+ printf("MII not complete\n");
+ return -1;
+ }
+
+ mii_reply = ep->mmfr; /* result from phy */
+ ep->eir = FEC_EIR_MII; /* clear MII complete */
+#ifdef ET_DEBUG
+ printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+ __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
+#endif
+
+ return (mii_reply & 0xffff); /* data read from phy */
+}
+#endif /* CFG_DISCOVER_PHY || (CONFIG_MII) */
+
+#if defined(CFG_DISCOVER_PHY)
+int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+ struct fec_info_s *info = dev->priv;
+ int phyaddr, pass;
+ uint phyno, phytype;
+
+ if (info->phyname_init)
+ return info->phy_addr;
+
+ phyaddr = -1; /* didn't find a PHY yet */
+ for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+ if (pass > 1) {
+ /* PHY may need more time to recover from reset.
+ * The LXT970 needs 50ms typical, no maximum is
+ * specified, so wait 10ms before try again.
+ * With 11 passes this gives it 100ms to wake up.
+ */
+ udelay(10000); /* wait 10ms */
+ }
+
+ for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+
+ phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+ printf("PHY type 0x%x pass %d type\n", phytype, pass);
+#endif
+ if (phytype != 0xffff) {
+ phyaddr = phyno;
+ phytype <<= 16;
+ phytype |=
+ mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+
+ switch (phytype & 0xffffffff) {
+ case PHY_ID_DP83848VV:
+ strcpy(info->phy_name,
+ STR_ID_DP83848VV);
+ info->phyname_init = 1;
+ break;
+ default:
+ strcpy(info->phy_name, "unknown");
+ info->phyname_init = 1;
+ break;
+ }
+
+#ifdef ET_DEBUG
+ printf("PHY @ 0x%x pass %d type ", phyno, pass);
+ switch (phytype & 0xffffffff) {
+ case PHY_ID_DP83848VV:
+ printf(STR_ID_DP83848VV);
+ break;
+ default:
+ printf("0x%08x\n", phytype);
+ break;
+ }
+#endif
+ }
+ }
+ }
+ if (phyaddr < 0)
+ printf("No PHY device found.\n");
+
+ return phyaddr;
+}
+#endif /* CFG_DISCOVER_PHY */
+
+int mii_init(void) __attribute__((weak,alias("__mii_init")));
+
+void __mii_init(void)
+{
+ volatile fec_t *fecp;
+ struct fec_info_s *info;
+ struct eth_device *dev;
+ int miispd = 0, i = 0;
+ u16 autoneg = 0;
+
+ /* retrieve from register structure */
+ dev = eth_get_dev();
+ info = dev->priv;
+
+ fecp = (fec_t *) info->miibase;
+
+ /* We use strictly polling mode only */
+ fecp->eimr = 0;
+
+ /* Clear any pending interrupt */
+ fecp->eir = 0xffffffff;
+
+ /* Set MII speed */
+ miispd = (gd->bus_clk / 1000000) / 5;
+ fecp->mscr = miispd << 1;
+
+ info->phy_addr = mii_discover_phy(dev);
+
+#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
+ while (i < MCFFEC_TOUT_LOOP) {
+ autoneg = 0;
+ miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
+ i++;
+
+ if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
+ break;
+
+ udelay(500);
+ }
+ if (i >= MCFFEC_TOUT_LOOP) {
+ printf("Auto Negotiation not complete\n");
+ }
+
+ /* adapt to the half/full speed settings */
+ info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
+ info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ * no PHY connected...
+ * For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ * Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+ unsigned short *value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+ rdreg = mii_send(mk_mii_read(addr, reg));
+
+ *value = rdreg;
+
+#ifdef MII_DEBUG
+ printf("0x%04x\n", *value);
+#endif
+
+ return 0;
+}
+
+int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+ unsigned short value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+ rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+ printf("0x%04x\n", value);
+#endif
+
+ return 0;
+}
+
+#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m54455evb/u-boot.lds
new file mode 100644
index 0000000..bda68e4
--- /dev/null
+++ b/board/freescale/m54455evb/u-boot.lds
@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mcf5445x/start.o (.text)
+ lib_m68k/traps.o (.text)
+ lib_m68k/interrupts.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/zlib.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+
+ .reloc :
+ {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ _sbss = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .;
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}