Merge git://git.denx.de/u-boot-i2c
diff --git a/MAINTAINERS b/MAINTAINERS
index c8386ab..0cf2602 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -196,7 +196,8 @@
F: drivers/mtd/jedec_flash.c
COLDFIRE
-M: Jason Jin <jason.jin@freescale.com>
+M: Huan Wang <alison.wang@freescale.com>
+M: Angelo Dureghello <angelo@sysam.it>
S: Maintained
T: git git://git.denx.de/u-boot-coldfire.git
F: arch/m68k/
@@ -390,6 +391,7 @@
UBI
M: Kyungmin Park <kmpark@infradead.org>
+M: Heiko Schocher <hs@denx.de>
S: Maintained
T: git git://git.denx.de/u-boot-ubi.git
F: drivers/mtd/ubi/
diff --git a/Makefile b/Makefile
index b4ed775..8a0de5c 100644
--- a/Makefile
+++ b/Makefile
@@ -503,6 +503,7 @@
-path ./include/config/auto.conf -newer $(KCONFIG_CONFIG)))
ifneq ($(autoconf_is_current),)
include $(srctree)/config.mk
+include $(srctree)/arch/$(ARCH)/Makefile
endif
# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
@@ -601,17 +602,11 @@
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
-head-y := $(CPUDIR)/start.o
-head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o
-head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o
-
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
libs-y += lib/
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
-libs-y += $(CPUDIR)/
libs-$(CONFIG_OF_EMBED) += dts/
-libs-y += arch/$(ARCH)/lib/
libs-y += fs/
libs-y += net/
libs-y += disk/
@@ -645,23 +640,11 @@
libs-y += drivers/usb/phy/
libs-y += drivers/usb/ulpi/
libs-y += common/
-libs-y += lib/libfdt/
libs-$(CONFIG_API) += api/
libs-$(CONFIG_HAS_POST) += post/
libs-y += test/
libs-y += test/dm/
-ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
-libs-y += arch/$(ARCH)/imx-common/
-endif
-
-ifneq (,$(filter $(SOC), armada-xp kirkwood))
-libs-y += arch/$(ARCH)/mvebu-common/
-endif
-
-libs-$(CONFIG_ARM) += arch/arm/cpu/
-libs-$(CONFIG_PPC) += arch/powerpc/cpu/
-
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
libs-y := $(sort $(libs-y))
diff --git a/README b/README
index 66770b6..bfefa21 100644
--- a/README
+++ b/README
@@ -3657,10 +3657,13 @@
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
- CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION
- Address, size and partition on the MMC to load U-Boot from
+ Address and partition on the MMC to load U-Boot from
when the MMC is being used in raw mode.
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
+ Partition on the MMC to load U-Boot from when the MMC is being
+ used in raw mode
+
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
Sector to load kernel uImage from when MMC is being
used in raw mode (for Falcon mode)
@@ -3671,6 +3674,10 @@
parameters from when MMC is being used in raw mode
(for falcon mode)
+ CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
+ Partition on the MMC to load U-Boot from when the MMC is being
+ used in fs mode
+
CONFIG_SPL_FAT_SUPPORT
Support for fs/fat/libfat.o in SPL binary
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
new file mode 100644
index 0000000..de25cc9
--- /dev/null
+++ b/arch/arc/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/arc/cpu/$(CPU)/start.o
+
+libs-y += arch/arc/cpu/$(CPU)/
+libs-y += arch/arc/lib/
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0982117..7a64b66 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -396,8 +396,8 @@
bool "Support mx35pdk"
select CPU_ARM1136
-config TARGET_RPI_B
- bool "Support rpi_b"
+config TARGET_RPI
+ bool "Support rpi"
select CPU_ARM1176
config TARGET_TNETV107X_EVM
@@ -931,7 +931,7 @@
source "board/phytec/pcm051/Kconfig"
source "board/ppcag/bg0900/Kconfig"
source "board/pxa255_idp/Kconfig"
-source "board/raspberrypi/rpi_b/Kconfig"
+source "board/raspberrypi/rpi/Kconfig"
source "board/ronetix/pm9261/Kconfig"
source "board/ronetix/pm9263/Kconfig"
source "board/ronetix/pm9g45/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
new file mode 100644
index 0000000..ebb7dc3
--- /dev/null
+++ b/arch/arm/Makefile
@@ -0,0 +1,29 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/arm/cpu/$(CPU)/start.o
+
+ifeq ($(CONFIG_SPL_BUILD),y)
+ifneq ($(CONFIG_SPL_START_S_PATH),)
+head-y := $(CONFIG_SPL_START_S_PATH:"%"=%)/start.o
+endif
+endif
+
+libs-y += arch/arm/cpu/$(CPU)/
+libs-y += arch/arm/cpu/
+libs-y += arch/arm/lib/
+
+ifeq ($(CONFIG_SPL_BUILD),y)
+ifneq (,$(CONFIG_MX23)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
+libs-y += arch/arm/imx-common/
+endif
+else
+ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
+libs-y += arch/arm/imx-common/
+endif
+endif
+
+ifneq (,$(filter $(SOC), armada-xp kirkwood))
+libs-y += arch/arm/mvebu-common/
+endif
diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig
index 36b7f11..9760299 100644
--- a/arch/arm/cpu/armv7/uniphier/Kconfig
+++ b/arch/arm/cpu/armv7/uniphier/Kconfig
@@ -5,15 +5,17 @@
default "uniphier"
config SYS_CONFIG_NAME
- default "ph1_pro4" if MACH_PH1_PRO4
- default "ph1_ld4" if MACH_PH1_LD4
- default "ph1_sld8" if MACH_PH1_SLD8
+ default "uniphier"
+
+config UNIPHIER_SMP
+ bool
choice
prompt "UniPhier SoC select"
config MACH_PH1_PRO4
bool "PH1-Pro4"
+ select UNIPHIER_SMP
config MACH_PH1_LD4
bool "PH1-LD4"
@@ -23,6 +25,29 @@
endchoice
+choice
+ prompt "UniPhier Support Card select"
+ optional
+
+config PFC_MICRO_SUPPORT_CARD
+ bool "Support card with PFC CPLD"
+ help
+ This option provides support for the expansion board with PFC
+ original address mapping.
+
+ Say Y to use the on-board UART, Ether, LED devices.
+
+config DCC_MICRO_SUPPORT_CARD
+ bool "Support card with DCC CPLD"
+ help
+ This option provides support for the expansion board with DCC-
+ arranged address mapping that is compatible with legacy UniPhier
+ reference boards.
+
+ Say Y to use the on-board UART, Ether, LED devices.
+
+endchoice
+
config CMD_PINMON
bool "Enable boot mode pins monitor command"
depends on !SPL_BUILD
diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile
index 0f64d25..4a7b8a9 100644
--- a/arch/arm/cpu/armv7/uniphier/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/Makefile
@@ -11,6 +11,7 @@
obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o
obj-y += dram_init.o
obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
+obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o
obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
obj-$(CONFIG_UNIPHIER_SMP) += smp.o
obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o
diff --git a/arch/arm/cpu/armv7/uniphier/board_early_init_r.c b/arch/arm/cpu/armv7/uniphier/board_early_init_r.c
new file mode 100644
index 0000000..cb7e04f
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/board_early_init_r.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/board.h>
+
+int board_early_init_r(void)
+{
+ uniphier_board_late_init();
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/uniphier/board_late_init.c b/arch/arm/cpu/armv7/uniphier/board_late_init.c
index 3730020..0622a1e 100644
--- a/arch/arm/cpu/armv7/uniphier/board_late_init.c
+++ b/arch/arm/cpu/armv7/uniphier/board_late_init.c
@@ -26,42 +26,6 @@
#endif
}
-static void nand_denali_fixup(void)
-{
-#if defined(CONFIG_NAND_DENALI) && \
- (defined(CONFIG_MACH_PH1_SLD8) || defined(CONFIG_MACH_PH1_PRO4))
- /*
- * The Denali NAND controller on some of UniPhier SoCs does not
- * automatically query the device parameters. For those SoCs,
- * some registers must be set after the device is probed.
- */
- void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE;
- struct mtd_info *mtd;
- struct nand_chip *chip;
-
- if (nand_curr_device < 0 ||
- nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE) {
- /* NAND was not detected. Just return. */
- return;
- }
-
- mtd = &nand_info[nand_curr_device];
- chip = mtd->priv;
-
- writel(mtd->erasesize / mtd->writesize, denali_reg + PAGES_PER_BLOCK);
- writel(0, denali_reg + DEVICE_WIDTH);
- writel(mtd->writesize, denali_reg + DEVICE_MAIN_AREA_SIZE);
- writel(mtd->oobsize, denali_reg + DEVICE_SPARE_AREA_SIZE);
- writel(1, denali_reg + DEVICES_CONNECTED);
-
- /*
- * chip->scan_bbt in nand_scan_tail() has been skipped.
- * It should be done in here.
- */
- chip->scan_bbt(mtd);
-#endif
-}
-
int board_late_init(void)
{
puts("MODE: ");
@@ -70,7 +34,6 @@
case BOOT_DEVICE_MMC1:
printf("eMMC Boot\n");
setenv("bootmode", "emmcboot");
- nand_denali_fixup();
break;
case BOOT_DEVICE_NAND:
printf("NAND Boot\n");
@@ -80,7 +43,6 @@
case BOOT_DEVICE_NOR:
printf("NOR Boot\n");
setenv("bootmode", "norboot");
- nand_denali_fixup();
break;
default:
printf("Unsupported Boot Mode\n");
diff --git a/arch/arm/cpu/armv7/uniphier/init_page_table.c b/arch/arm/cpu/armv7/uniphier/init_page_table.c
index d273835..a0d10a9 100644
--- a/arch/arm/cpu/armv7/uniphier/init_page_table.c
+++ b/arch/arm/cpu/armv7/uniphier/init_page_table.c
@@ -28,7 +28,12 @@
#define IS_SSC(x) ((IS_SPL_TEXT_AREA(x)) || \
(IS_INIT_STACK_AREA(x)))
#define IS_EXT(x) ((x) < 0x100)
-#define IS_REG(x) (0x500 <= (x) && (x) < 0x700)
+
+/* 0x20000000-0x2fffffff, 0xf0000000-0xffffffff are only used by PH1-sLD3 */
+#define IS_REG(x) (0x200 <= (x) && (x) < 0x300) || \
+ (0x500 <= (x) && (x) < 0x700) || \
+ (0xf00 <= (x))
+
#define IS_DDR(x) (0x800 <= (x) && (x) < 0xf00)
#define MMU_FLAGS(x) (IS_SSC(x)) ? SSC : \
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c
index f113db5..3c82a1a 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c
@@ -22,16 +22,7 @@
writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
- if (readl(SBBASE0) & 0x1) {
- /*
- * Boot Swap Off: boot from mask ROM
- * 0x00000000-0x01ffffff: mask ROM
- * 0x02000000-0x3effffff: memory bank (31MB)
- * 0x03f00000-0x3fffffff: peripherals (1MB)
- */
- writel(0x0000be01, SBBASE0); /* dummy */
- writel(0x0200be01, SBBASE1);
- } else {
+ if (boot_is_swapped()) {
/*
* Boot Swap On: boot from external NOR/SRAM
* 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff.
@@ -40,6 +31,15 @@
* 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals
*/
writel(0x0000bc01, SBBASE0);
+ } else {
+ /*
+ * Boot Swap Off: boot from mask ROM
+ * 0x00000000-0x01ffffff: mask ROM
+ * 0x02000000-0x3effffff: memory bank (31MB)
+ * 0x03f00000-0x3fffffff: peripherals (1MB)
+ */
+ writel(0x0000be01, SBBASE0); /* dummy */
+ writel(0x0200be01, SBBASE1);
}
#elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
#if !defined(CONFIG_SPL_BUILD)
diff --git a/arch/arm/cpu/armv7/uniphier/support_card.c b/arch/arm/cpu/armv7/uniphier/support_card.c
index 40d4940..419012e 100644
--- a/arch/arm/cpu/armv7/uniphier/support_card.c
+++ b/arch/arm/cpu/armv7/uniphier/support_card.c
@@ -83,6 +83,12 @@
}
#endif
+int check_support_card(void)
+{
+ printf("SC: Micro Support Card ");
+ return support_card_show_revision();
+}
+
void support_card_init(void)
{
/*
@@ -94,12 +100,6 @@
support_card_reset_deassert();
}
-int check_support_card(void)
-{
- printf("SC: Micro Support Card ");
- return support_card_show_revision();
-}
-
#if defined(CONFIG_SMC911X)
#include <netdev.h>
@@ -112,18 +112,14 @@
#if !defined(CONFIG_SYS_NO_FLASH)
#include <mtd/cfi_flash.h>
+#include <asm/arch/sbc-regs.h>
-#if CONFIG_SYS_MAX_FLASH_BANKS > 1
-static phys_addr_t flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS] =
- CONFIG_SYS_FLASH_BANKS_LIST;
+struct memory_bank {
+ phys_addr_t base;
+ unsigned long size;
+};
-phys_addr_t cfi_flash_bank_addr(int i)
-{
- return flash_banks_list[i];
-}
-#endif
-
-int mem_is_flash(phys_addr_t base)
+static int mem_is_flash(const struct memory_bank *mem)
{
const int loop = 128;
u32 *scratch_addr;
@@ -131,8 +127,9 @@
int ret = 1;
int i;
- scratch_addr = map_physmem(base + 0x01e00000,
- sizeof(u32) * loop, MAP_NOCACHE);
+ /* just in case, use the tail of the memory bank */
+ scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop,
+ sizeof(u32) * loop, MAP_NOCACHE);
for (i = 0; i < loop; i++, scratch_addr++) {
saved_value = readl(scratch_addr);
@@ -150,31 +147,79 @@
return ret;
}
-int board_flash_wp_on(void)
-{
- int i;
- int ret = 1;
+#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
+ /* {address, size} */
+static const struct memory_bank memory_banks_boot_swap_off[] = {
+ {0x02000000, 0x01f00000},
+};
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- if (mem_is_flash(cfi_flash_bank_addr(i))) {
- /*
- * We found at least one flash.
- * We need to return 0 and call flash_init().
- */
- ret = 0;
- }
-#if CONFIG_SYS_MAX_FLASH_BANKS > 1
- else {
- /*
- * We might have a SRAM here.
- * To prevent SRAM data from being destroyed,
- * we set dummy address (SDRAM).
- */
- flash_banks_list[i] = 0x80000000 + 0x10000 * i;
- }
+static const struct memory_bank memory_banks_boot_swap_on[] = {
+ {0x00000000, 0x01f00000},
+};
#endif
+
+#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
+static const struct memory_bank memory_banks_boot_swap_off[] = {
+ {0x04000000, 0x04000000},
+};
+
+static const struct memory_bank memory_banks_boot_swap_on[] = {
+ {0x00000000, 0x04000000},
+ {0x04000000, 0x04000000},
+};
+#endif
+
+static const struct memory_bank
+*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
+
+phys_addr_t cfi_flash_bank_addr(int i)
+{
+ return flash_banks_list[i]->base;
+}
+
+unsigned long cfi_flash_bank_size(int i)
+{
+ return flash_banks_list[i]->size;
+}
+
+static void detect_num_flash_banks(void)
+{
+ const struct memory_bank *memory_bank, *end;
+
+ cfi_flash_num_flash_banks = 0;
+
+ if (boot_is_swapped()) {
+ memory_bank = memory_banks_boot_swap_on;
+ end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on);
+ } else {
+ memory_bank = memory_banks_boot_swap_off;
+ end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off);
}
- return ret;
+ for (; memory_bank < end; memory_bank++) {
+ if (cfi_flash_num_flash_banks >=
+ CONFIG_SYS_MAX_FLASH_BANKS_DETECT)
+ break;
+
+ if (mem_is_flash(memory_bank)) {
+ flash_banks_list[cfi_flash_num_flash_banks] =
+ memory_bank;
+
+ debug("flash bank found: base = 0x%lx, size = 0x%lx\n",
+ memory_bank->base, memory_bank->size);
+ cfi_flash_num_flash_banks++;
+ }
+ }
+
+ debug("number of flash banks: %d\n", cfi_flash_num_flash_banks);
}
-#endif
+#else /* ONFIG_SYS_NO_FLASH */
+void detect_num_flash_banks(void)
+{
+};
+#endif /* ONFIG_SYS_NO_FLASH */
+
+void support_card_late_init(void)
+{
+ detect_num_flash_banks();
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 01df9a9..187d58c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -33,6 +33,7 @@
tegra124-jetson-tk1.dtb \
tegra124-venice2.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \
+ uniphier-ph1-sld3-ref.dtb \
uniphier-ph1-pro4-ref.dtb \
uniphier-ph1-ld4-ref.dtb \
uniphier-ph1-sld8-ref.dtb
diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/dts/uniphier-ph1-ld4-ref.dts
index f01189c..08bbd03 100644
--- a/arch/arm/dts/uniphier-ph1-ld4-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts
@@ -23,20 +23,39 @@
bootargs = "console=ttyPS0,115200 earlyprintk";
stdout-path = &uart0;
};
+
+ aliases {
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ uart3 = &uart3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
};
&uart0 {
- status = "okay";
+ status = "okay";
};
&uart1 {
- status = "okay";
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ eeprom {
+ compatible = "i2c-eeprom";
+ reg = <0x50>;
+ };
};
&usb0 {
- status = "okay";
+ status = "okay";
};
&usb1 {
- status = "okay";
+ status = "okay";
};
diff --git a/arch/arm/dts/uniphier-ph1-ld4.dtsi b/arch/arm/dts/uniphier-ph1-ld4.dtsi
index 80074c5..2a3dd73 100644
--- a/arch/arm/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/dts/uniphier-ph1-ld4.dtsi
@@ -13,8 +13,8 @@
compatible = "panasonic,ph1-ld4";
cpus {
- #size-cells = <0>;
#address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
device_type = "cpu";
@@ -57,6 +57,42 @@
clock-frequency = <36864000>;
};
+ i2c0: i2c@58400000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58400000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58480000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@58500000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58500000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58580000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
usb0: usb@5a800100 {
compatible = "panasonic,uniphier-ehci", "usb-ehci";
status = "disabled";
@@ -74,5 +110,11 @@
status = "disabled";
reg = <0x5a820100 0x100>;
};
+
+ nand: nand@68000000 {
+ compatible = "denali,denali-nand-dt";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ };
};
};
diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts
index 52fa81f..23add7c 100644
--- a/arch/arm/dts/uniphier-ph1-pro4-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts
@@ -23,20 +23,41 @@
bootargs = "console=ttyPS0,115200 earlyprintk";
stdout-path = &uart0;
};
+
+ aliases {
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ uart3 = &uart3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
};
&uart0 {
- status = "okay";
+ status = "okay";
};
&uart1 {
- status = "okay";
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ eeprom {
+ compatible = "i2c-eeprom";
+ reg = <0x50>;
+ };
};
&usb0 {
- status = "okay";
+ status = "okay";
};
&usb1 {
- status = "okay";
+ status = "okay";
};
diff --git a/arch/arm/dts/uniphier-ph1-pro4.dtsi b/arch/arm/dts/uniphier-ph1-pro4.dtsi
index dd84269..49e375e 100644
--- a/arch/arm/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/dts/uniphier-ph1-pro4.dtsi
@@ -13,8 +13,8 @@
compatible = "panasonic,ph1-pro4";
cpus {
- #size-cells = <0>;
#address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
device_type = "cpu";
@@ -63,6 +63,62 @@
clock-frequency = <73728000>;
};
+ i2c0: i2c@58780000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58780000 0x80>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@58781000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58781000 0x80>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@58782000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58782000 0x80>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@58783000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58783000 0x80>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ /* i2c4 does not exist */
+
+ i2c5: i2c@58785000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58785000 0x80>;
+ clock-frequency = <400000>;
+ status = "ok";
+ };
+
+ i2c6: i2c@58786000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58786000 0x80>;
+ clock-frequency = <400000>;
+ status = "ok";
+ };
+
usb0: usb@5a800100 {
compatible = "panasonic,uniphier-ehci", "usb-ehci";
status = "disabled";
@@ -74,5 +130,11 @@
status = "disabled";
reg = <0x5a810100 0x100>;
};
+
+ nand: nand@68000000 {
+ compatible = "denali,denali-nand-dt";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ };
};
};
diff --git a/arch/arm/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/dts/uniphier-ph1-sld3-ref.dts
new file mode 100644
index 0000000..91b4dbe
--- /dev/null
+++ b/arch/arm/dts/uniphier-ph1-sld3-ref.dts
@@ -0,0 +1,60 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 Reference Board
+ *
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld3.dtsi"
+
+/ {
+ model = "Panasonic UniPhier PH1-sLD3 Reference Board";
+ compatible = "panasonic,ph1-sld3-ref", "panasonic,ph1-sld3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyPS0,115200 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ aliases {
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ eeprom {
+ compatible = "i2c-eeprom";
+ reg = <0x50>;
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/uniphier-ph1-sld3.dtsi b/arch/arm/dts/uniphier-ph1-sld3.dtsi
new file mode 100644
index 0000000..f5529d2
--- /dev/null
+++ b/arch/arm/dts/uniphier-ph1-sld3.dtsi
@@ -0,0 +1,125 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 SoC
+ *
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "panasonic,ph1-sld3";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ uart0: serial@54006800 {
+ compatible = "panasonic,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x20>;
+ clock-frequency = <36864000>;
+ };
+
+ uart1: serial@54006900 {
+ compatible = "panasonic,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x20>;
+ clock-frequency = <36864000>;
+ };
+
+ uart2: serial@54006a00 {
+ compatible = "panasonic,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x20>;
+ clock-frequency = <36864000>;
+ };
+
+ i2c0: i2c@58400000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58400000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58480000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@58500000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58500000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58580000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ usb0: usb@5a800100 {
+ compatible = "panasonic,uniphier-ehci", "usb-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ };
+
+ usb1: usb@5a810100 {
+ compatible = "panasonic,uniphier-ehci", "usb-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ };
+
+ usb2: usb@5a820100 {
+ compatible = "panasonic,uniphier-ehci", "usb-ehci";
+ status = "disabled";
+ reg = <0x5a820100 0x100>;
+ };
+
+ usb3: usb@5a830100 {
+ compatible = "panasonic,uniphier-ehci", "usb-ehci";
+ status = "disabled";
+ reg = <0x5a830100 0x100>;
+ };
+
+ nand: nand@f8000000 {
+ compatible = "denali,denali-nand-dt";
+ reg = <0xf8000000 0x20>, <0xf8100000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ };
+ };
+};
diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/dts/uniphier-ph1-sld8-ref.dts
index ac73aad..a8ce049 100644
--- a/arch/arm/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts
@@ -23,20 +23,39 @@
bootargs = "console=ttyPS0,115200 earlyprintk";
stdout-path = &uart0;
};
+
+ aliases {
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ uart3 = &uart3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
};
&uart0 {
- status = "okay";
+ status = "okay";
};
&uart1 {
- status = "okay";
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ eeprom {
+ compatible = "i2c-eeprom";
+ reg = <0x50>;
+ };
};
&usb0 {
- status = "okay";
+ status = "okay";
};
&usb1 {
- status = "okay";
+ status = "okay";
};
diff --git a/arch/arm/dts/uniphier-ph1-sld8.dtsi b/arch/arm/dts/uniphier-ph1-sld8.dtsi
index 43a39f5..0ea76e5 100644
--- a/arch/arm/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/dts/uniphier-ph1-sld8.dtsi
@@ -13,8 +13,8 @@
compatible = "panasonic,ph1-sld8";
cpus {
- #size-cells = <0>;
#address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
device_type = "cpu";
@@ -57,6 +57,42 @@
clock-frequency = <80000000>;
};
+ i2c0: i2c@58400000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58400000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58480000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@58500000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58500000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58580000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
usb0: usb@5a800100 {
compatible = "panasonic,uniphier-ehci", "usb-ehci";
status = "disabled";
@@ -74,5 +110,11 @@
status = "disabled";
reg = <0x5a820100 0x100>;
};
+
+ nand: nand@68000000 {
+ compatible = "denali,denali-nand-dt";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ };
};
};
diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h
index 61f427d..0289ba6 100644
--- a/arch/arm/include/asm/arch-bcm2835/mbox.h
+++ b/arch/arm/include/asm/arch-bcm2835/mbox.h
@@ -119,6 +119,39 @@
* };
*/
+#define BCM2835_MBOX_TAG_GET_BOARD_REV 0x00010002
+
+/*
+ * 0x2..0xf from:
+ * http://raspberryalphaomega.org.uk/2013/02/06/automatic-raspberry-pi-board-revision-detection-model-a-b1-and-b2/
+ * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=32733
+ * 0x10, 0x11 from swarren's testing
+ */
+#define BCM2835_BOARD_REV_B_I2C0_2 0x2
+#define BCM2835_BOARD_REV_B_I2C0_3 0x3
+#define BCM2835_BOARD_REV_B_I2C1_4 0x4
+#define BCM2835_BOARD_REV_B_I2C1_5 0x5
+#define BCM2835_BOARD_REV_B_I2C1_6 0x6
+#define BCM2835_BOARD_REV_A_7 0x7
+#define BCM2835_BOARD_REV_A_8 0x8
+#define BCM2835_BOARD_REV_A_9 0x9
+#define BCM2835_BOARD_REV_B_REV2_d 0xd
+#define BCM2835_BOARD_REV_B_REV2_e 0xe
+#define BCM2835_BOARD_REV_B_REV2_f 0xf
+#define BCM2835_BOARD_REV_B_PLUS 0x10
+#define BCM2835_BOARD_REV_CM 0x11
+
+struct bcm2835_mbox_tag_get_board_rev {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct {
+ } req;
+ struct {
+ u32 rev;
+ } resp;
+ } body;
+};
+
#define BCM2835_MBOX_TAG_GET_MAC_ADDRESS 0x00010003
struct bcm2835_mbox_tag_get_mac_address {
diff --git a/arch/arm/include/asm/arch-uniphier/board.h b/arch/arm/include/asm/arch-uniphier/board.h
index e6ba4e4..e3cba5b 100644
--- a/arch/arm/include/asm/arch-uniphier/board.h
+++ b/arch/arm/include/asm/arch-uniphier/board.h
@@ -12,10 +12,12 @@
defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
void support_card_reset(void);
void support_card_init(void);
+void support_card_late_init(void);
int check_support_card(void);
#else
#define support_card_reset() do {} while (0)
#define support_card_init() do {} while (0)
+#define support_card_late_init() do {} while (0)
static inline int check_support_card(void)
{
return 0;
@@ -32,4 +34,9 @@
support_card_init();
}
+static inline void uniphier_board_late_init(void)
+{
+ support_card_late_init();
+}
+
#endif /* ARCH_BOARD_H */
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
new file mode 100644
index 0000000..e9b3184
--- /dev/null
+++ b/arch/avr32/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/avr32/cpu/start.o
+
+libs-y += arch/avr32/cpu/
+libs-y += arch/avr32/lib/
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
new file mode 100644
index 0000000..787475e
--- /dev/null
+++ b/arch/blackfin/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/blackfin/cpu/start.o
+
+libs-y += arch/blackfin/cpu/
+libs-y += arch/blackfin/lib/
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index 69f08bc..aadb0d2 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -11,10 +11,9 @@
#ifdef __KERNEL__
+#include <linux/compiler.h>
#include <asm/blackfin.h>
-#define __iomem
-
static inline void sync(void)
{
SSYNC();
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
new file mode 100644
index 0000000..aa3d2fa
--- /dev/null
+++ b/arch/m68k/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/m68k/cpu/$(CPU)/start.o
+
+libs-y += arch/m68k/cpu/$(CPU)/
+libs-y += arch/m68k/lib/
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
new file mode 100644
index 0000000..ae4adc2
--- /dev/null
+++ b/arch/microblaze/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/microblaze/cpu/start.o
+
+libs-y += arch/microblaze/cpu/
+libs-y += arch/microblaze/lib/
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
new file mode 100644
index 0000000..1907b57
--- /dev/null
+++ b/arch/mips/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/mips/cpu/$(CPU)/start.o
+
+libs-y += arch/mips/cpu/$(CPU)/
+libs-y += arch/mips/lib/
diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h
index 1d5112e..c25a846 100644
--- a/arch/mips/include/asm/unaligned.h
+++ b/arch/mips/include/asm/unaligned.h
@@ -8,7 +8,7 @@
#ifndef _ASM_MIPS_UNALIGNED_H
#define _ASM_MIPS_UNALIGNED_H
-#include <compiler.h>
+#include <linux/compiler.h>
#if defined(__MIPSEB__)
#define get_unaligned __get_unaligned_be
#define put_unaligned __put_unaligned_be
diff --git a/arch/nds32/Makefile b/arch/nds32/Makefile
new file mode 100644
index 0000000..e1eccba
--- /dev/null
+++ b/arch/nds32/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/nds32/cpu/$(CPU)/start.o
+
+libs-y += arch/nds32/cpu/$(CPU)/
+libs-y += arch/nds32/lib/
diff --git a/arch/nios2/Makefile b/arch/nios2/Makefile
new file mode 100644
index 0000000..18685a9
--- /dev/null
+++ b/arch/nios2/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/nios2/cpu/start.o
+
+libs-y += arch/nios2/cpu/
+libs-y += arch/nios2/lib/
diff --git a/arch/openrisc/Makefile b/arch/openrisc/Makefile
new file mode 100644
index 0000000..c4da3ce
--- /dev/null
+++ b/arch/openrisc/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/openrisc/cpu/start.o
+
+libs-y += arch/openrisc/cpu/
+libs-y += arch/openrisc/lib/
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
new file mode 100644
index 0000000..8aa1d60
--- /dev/null
+++ b/arch/powerpc/Makefile
@@ -0,0 +1,11 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/powerpc/cpu/$(CPU)/start.o
+head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o
+head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o
+
+libs-y += arch/powerpc/cpu/$(CPU)/
+libs-y += arch/powerpc/cpu/
+libs-y += arch/powerpc/lib/
diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig
index e447748e..99420ab 100644
--- a/arch/powerpc/cpu/mpc8xx/Kconfig
+++ b/arch/powerpc/cpu/mpc8xx/Kconfig
@@ -13,9 +13,6 @@
config TARGET_ESTEEM192E
bool "Support ESTEEM192E"
-config TARGET_HERMES
- bool "Support hermes"
-
config TARGET_IP860
bool "Support IP860"
@@ -112,7 +109,6 @@
source "board/RRvision/Kconfig"
source "board/cogent/Kconfig"
source "board/esteem192e/Kconfig"
-source "board/hermes/Kconfig"
source "board/ip860/Kconfig"
source "board/ivm/Kconfig"
source "board/kup/kup4k/Kconfig"
diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c
index 60c401e..6a1cd46 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c
@@ -125,8 +125,7 @@
* I owe him a free beer. - wd]
*/
-#if defined(CONFIG_HERMES) || \
- defined(CONFIG_IP860) || \
+#if defined(CONFIG_IP860) || \
defined(CONFIG_IVML24) || \
defined(CONFIG_IVMS8) || \
defined(CONFIG_LWMON) || \
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index 6eaab88..e6d5355 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -820,13 +820,6 @@
mac_read_from_eeprom();
#endif
-#ifdef CONFIG_HERMES
- if ((gd->board_type >> 16) == 2)
- bd->bi_ethspeed = gd->board_type & 0xFFFF;
- else
- bd->bi_ethspeed = 0xFFFF;
-#endif
-
#ifdef CONFIG_CMD_NET
/* kept around for legacy kernels only ... ignore the next section */
eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr);
@@ -876,11 +869,6 @@
misc_init_r();
#endif
-#ifdef CONFIG_HERMES
- if (bd->bi_ethspeed != 0xFFFF)
- hermes_start_lxt980((int) bd->bi_ethspeed);
-#endif
-
#if defined(CONFIG_CMD_KGDB)
WATCHDOG_RESET();
puts("KGDB: ");
diff --git a/arch/sandbox/Makefile b/arch/sandbox/Makefile
new file mode 100644
index 0000000..23fdcdb
--- /dev/null
+++ b/arch/sandbox/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/sandbox/cpu/start.o
+
+libs-y += arch/sandbox/cpu/
+libs-y += arch/sandbox/lib/
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
new file mode 100644
index 0000000..ca55fac
--- /dev/null
+++ b/arch/sh/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/sh/cpu/$(CPU)/start.o
+
+libs-y += arch/sh/cpu/$(CPU)/
+libs-y += arch/sh/lib/
diff --git a/arch/sh/include/asm/unaligned.h b/arch/sh/include/asm/unaligned.h
index 2e0d164..06096ee 100644
--- a/arch/sh/include/asm/unaligned.h
+++ b/arch/sh/include/asm/unaligned.h
@@ -8,7 +8,7 @@
#include <asm/unaligned-sh4a.h>
#else
/* Otherwise, SH can't handle unaligned accesses. */
-#include <compiler.h>
+#include <linux/compiler.h>
#if defined(__BIG_ENDIAN__)
#define get_unaligned __get_unaligned_be
#define put_unaligned __put_unaligned_be
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
new file mode 100644
index 0000000..2d4c971
--- /dev/null
+++ b/arch/sparc/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/sparc/cpu/$(CPU)/start.o
+
+libs-y += arch/sparc/cpu/$(CPU)/
+libs-y += arch/sparc/lib/
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
new file mode 100644
index 0000000..36a6018
--- /dev/null
+++ b/arch/x86/Makefile
@@ -0,0 +1,12 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/x86/cpu/start.o
+ifeq ($(CONFIG_SPL_BUILD),y)
+head-y += arch/x86/cpu/start16.o
+head-y += arch/x86/cpu/resetvec.o
+endif
+
+libs-y += arch/x86/cpu/
+libs-y += arch/x86/lib/
diff --git a/arch/x86/cpu/coreboot/ipchecksum.c b/arch/x86/cpu/coreboot/ipchecksum.c
index 5f6c009..3340872 100644
--- a/arch/x86/cpu/coreboot/ipchecksum.c
+++ b/arch/x86/cpu/coreboot/ipchecksum.c
@@ -29,7 +29,8 @@
* SUCH DAMAGE.
*/
-#include <compiler.h>
+#include <linux/types.h>
+#include <linux/compiler.h>
#include <asm/arch/ipchecksum.h>
unsigned short ipchksum(const void *vptr, unsigned long nbytes)
diff --git a/arch/x86/include/asm/arch-coreboot/sysinfo.h b/arch/x86/include/asm/arch-coreboot/sysinfo.h
index 8e4a61d..832c50a 100644
--- a/arch/x86/include/asm/arch-coreboot/sysinfo.h
+++ b/arch/x86/include/asm/arch-coreboot/sysinfo.h
@@ -10,7 +10,7 @@
#define _COREBOOT_SYSINFO_H
#include <common.h>
-#include <compiler.h>
+#include <linux/compiler.h>
#include <libfdt.h>
#include <asm/arch/tables.h>
diff --git a/arch/x86/include/asm/arch-coreboot/tables.h b/arch/x86/include/asm/arch-coreboot/tables.h
index 0d02fe0..e254484 100644
--- a/arch/x86/include/asm/arch-coreboot/tables.h
+++ b/arch/x86/include/asm/arch-coreboot/tables.h
@@ -9,7 +9,7 @@
#ifndef _COREBOOT_TABLES_H
#define _COREBOOT_TABLES_H
-#include <compiler.h>
+#include <linux/compiler.h>
struct cbuint64 {
u32 lo;
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index fcd9aa9..e0b2561 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -1,7 +1,7 @@
#ifndef _ASM_IO_H
#define _ASM_IO_H
-#include <compiler.h>
+#include <linux/compiler.h>
/*
* This file contains the definitions for the x86 IO instructions
diff --git a/arch/x86/lib/string.c b/arch/x86/lib/string.c
index a1656cc..6c66431 100644
--- a/arch/x86/lib/string.c
+++ b/arch/x86/lib/string.c
@@ -8,9 +8,9 @@
/* From glibc-2.14, sysdeps/i386/memset.c */
-#include <compiler.h>
-#include <asm/string.h>
#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/string.h>
typedef uint32_t op_t;
diff --git a/board/hermes/Kconfig b/board/hermes/Kconfig
deleted file mode 100644
index deb37fd..0000000
--- a/board/hermes/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_HERMES
-
-config SYS_BOARD
- default "hermes"
-
-config SYS_CONFIG_NAME
- default "hermes"
-
-endif
diff --git a/board/hermes/MAINTAINERS b/board/hermes/MAINTAINERS
deleted file mode 100644
index a596dad..0000000
--- a/board/hermes/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-HERMES BOARD
-M: Wolfgang Denk <wd@denx.de>
-S: Maintained
-F: board/hermes/
-F: include/configs/hermes.h
-F: configs/hermes_defconfig
diff --git a/board/hermes/Makefile b/board/hermes/Makefile
deleted file mode 100644
index ccca520..0000000
--- a/board/hermes/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = hermes.o flash.o
diff --git a/board/hermes/flash.c b/board/hermes/flash.c
deleted file mode 100644
index 38d3cd3..0000000
--- a/board/hermes/flash.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_byte (flash_info_t *info, ulong dest, uchar data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size, size<<20);
- }
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
- (memctl->memc_br0 & ~(BR_BA_MSK));
-
- /* Re-do sizing to get full correct info */
- size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
- flash_info[0].size = size;
-
- return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- uchar value;
- vu_char *caddr = (vu_char *)addr;
- ulong base = (ulong)addr;
-
-
- /* Write auto select command: read Manufacturer ID */
- caddr[0x0AAA] = 0xAA;
- caddr[0x0555] = 0x55;
- caddr[0x0AAA] = 0x90;
-
- value = caddr[0];
- switch (value) {
- case (AMD_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FUJ_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_FUJ;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- value = caddr[2]; /* device ID */
-
- switch (value) {
- case (AMD_ID_LV400T & 0xFF):
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case (AMD_ID_LV400B & 0xFF):
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case (AMD_ID_LV800T & 0xFF):
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (AMD_ID_LV800B & 0xFF):
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (AMD_ID_LV160T & 0xFF):
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (AMD_ID_LV160B & 0xFF):
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-#if 0 /* enable when device IDs are available */
- case (AMD_ID_LV320T & 0xFF):
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (AMD_ID_LV320B & 0xFF):
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection: D0 = 1 if protected */
- caddr = (volatile unsigned char *)(info->start[i]);
- info->protect[i] = caddr[4] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- caddr = (vu_char *)info->start[0];
-
- *caddr = 0xF0; /* reset bank */
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_char *addr = (vu_char*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0AAA] = 0xAA;
- addr[0x0555] = 0x55;
- addr[0x0AAA] = 0x80;
- addr[0x0AAA] = 0xAA;
- addr[0x0555] = 0x55;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_char*)(info->start[sect]);
- addr[0] = 0x30;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_char*)(info->start[l_sect]);
- while ((addr[0] & 0x80) != 0x80) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (vu_char *)info->start[0];
- addr[0] = 0xF0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- int rc;
-
- while (cnt > 0) {
- if ((rc = write_byte(info, addr++, *src++)) != 0) {
- return (rc);
- }
- --cnt;
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_byte (flash_info_t *info, ulong dest, uchar data)
-{
- vu_char *addr = (vu_char*)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_char *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0AAA] = 0xAA;
- addr[0x0555] = 0x55;
- addr[0x0AAA] = 0xA0;
-
- *((vu_char *)dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/hermes/hermes.c b/board/hermes/hermes.c
deleted file mode 100644
index 6126b73..0000000
--- a/board/hermes/hermes.c
+++ /dev/null
@@ -1,590 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <mpc8xx.h>
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) bootstage_mark(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-static ulong board_init (void);
-static void send_smi_frame (volatile scc_t * sp, volatile cbd_t * bd,
- uchar * msg);
-
-/* ------------------------------------------------------------------------- */
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-const uint sdram_table[] = {
- /*
- * Single Read. (Offset 0 in UPMA RAM)
- */
- 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
- 0x1ff77c47, /* last */
- /*
- * SDRAM Initialization (offset 5 in UPMA RAM)
- *
- * This is no UPM entry point. The following definition uses
- * the remaining space to establish an initialization
- * sequence, which is executed by a RUN command.
- *
- */
- 0x1fe77c35, 0xffaffc34, 0x1fa57c35, /* last */
- /*
- * Burst Read. (Offset 8 in UPMA RAM)
- */
- 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
- 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Single Write. (Offset 18 in UPMA RAM)
- */
- 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Burst Write. (Offset 20 in UPMA RAM)
- */
- 0x1f07fc04, 0xeeaebc00, 0x10ad4c00, 0xf0afcc00,
- 0xf0afcc00, 0xe1bb8c06, 0x1ff77c47, /* last */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Refresh (Offset 30 in UPMA RAM)
- */
- 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- 0xfffffc84, 0xfffffc07, /* last */
- _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Exception. (Offset 3c in UPMA RAM)
- */
- 0x7ffffc07, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- *
- * Test ID string (HERMES...)
- *
- * Return code for board revision and network speed
- */
-
-int checkboard (void)
-{
- char buf[64];
- int i;
- int l = getenv_f("serial#", buf, sizeof(buf));
-
- puts ("Board: ");
-
- if (l < 0 || strncmp(buf, "HERMES", 6)) {
- puts ("### No HW ID - assuming HERMES-PRO");
- } else {
- for (i = 0; i < l; i++) {
- if (buf[i] == ' ')
- break;
- putc (buf[i]);
- }
- }
-
- gd->board_type = board_init ();
-
- printf (" Rev. %ld.x\n", (gd->board_type >> 16));
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- long int size, size8, size9;
-
- upmconfig (UPMA, (uint *) sdram_table,
- sizeof (sdram_table) / sizeof (uint));
-
- /*
- * Preliminary prescaler for refresh
- */
- memctl->memc_mptpr = 0x0400;
-
- memctl->memc_mar = 0x00000088;
-
- /*
- * Map controller banks 1 to the SDRAM banks at preliminary address
- */
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-
- /* HERMES-PRO boards have only one bank SDRAM */
-
-
- udelay (200);
-
- /* perform SDRAM initializsation sequence */
-
- memctl->memc_mamr = 0xD0802114;
- memctl->memc_mcr = 0x80002105;
- udelay (1);
- memctl->memc_mamr = 0xD0802118;
- memctl->memc_mcr = 0x80002130;
- udelay (1);
- memctl->memc_mamr = 0xD0802114;
- memctl->memc_mcr = 0x80002106;
-
- udelay (1000);
-
- /*
- * Check Bank 0 Memory Size for re-configuration
- *
- * try 8 column mode
- */
- size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE_PRELIM,
- SDRAM_MAX_SIZE);
-
- udelay (1000);
-
- /*
- * try 9 column mode
- */
- size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE_PRELIM,
- SDRAM_MAX_SIZE);
-
- if (size8 < size9) { /* leave configuration at 9 columns */
- size = size9;
-/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
- } else { /* back to 8 columns */
- size = size8;
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
- udelay (500);
-/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
- }
-
- udelay (1000);
-
- memctl->memc_or1 = ((-size) & 0xFFFF0000) | SDRAM_TIMING;
- memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
- udelay (10000);
-
- return (size);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
- long int maxsize)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- memctl->memc_mamr = mamr_value;
-
- return (get_ram_size(base, maxsize));
-}
-
-/* ------------------------------------------------------------------------- */
-
-#define PB_LED_3 0x00020000 /* Status LED's */
-#define PB_LED_2 0x00010000
-#define PB_LED_1 0x00008000
-#define PB_LED_0 0x00004000
-
-#define PB_LED_ALL (PB_LED_0 | PB_LED_1 | PB_LED_2 | PB_LED_3)
-
-#define PC_REP_SPD1 0x00000800
-#define PC_REP_SPD0 0x00000400
-
-#define PB_RESET_2081 0x00000020 /* Reset PEB2081 */
-
-#define PB_MAI_4 0x00000010 /* Configuration */
-#define PB_MAI_3 0x00000008
-#define PB_MAI_2 0x00000004
-#define PB_MAI_1 0x00000002
-#define PB_MAI_0 0x00000001
-
-#define PB_MAI_ALL (PB_MAI_0 | PB_MAI_1 | PB_MAI_2 | PB_MAI_3 | PB_MAI_4)
-
-
-#define PC_REP_MGRPRS 0x0200
-#define PC_REP_SPD 0x0040 /* Select 100 Mbps */
-#define PC_REP_RES 0x0004
-#define PC_BIT14 0x0002 /* ??? */
-#define PC_BIT15 0x0001 /* ??? ENDSL ?? */
-
-/* ------------------------------------------------------------------------- */
-
-static ulong board_init (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- ulong reg, revision, speed = 100;
- int ethspeed;
- char *s;
-
- if ((s = getenv ("ethspeed")) != NULL) {
- if (strcmp (s, "100") == 0) {
- ethspeed = 100;
- } else if (strcmp (s, "10") == 0) {
- ethspeed = 10;
- } else {
- ethspeed = 0;
- }
- } else {
- ethspeed = 0;
- }
-
- /* Configure Port B Output Pins => 0x0003cc3F */
- reg = PB_LED_ALL | PC_REP_SPD1 | PC_REP_SPD0 | PB_RESET_2081 |
- PB_MAI_ALL;
- immr->im_cpm.cp_pbpar &= ~reg;
- immr->im_cpm.cp_pbodr &= ~reg;
- immr->im_cpm.cp_pbdat &= ~reg; /* all 0 */
- immr->im_cpm.cp_pbdir |= reg;
-
- /* Check hardware revision */
- if ((immr->im_ioport.iop_pcdat & 0x0003) == 0x0003) {
- /*
- * Revision 3.x hardware
- */
- revision = 3;
-
- immr->im_ioport.iop_pcdat = 0x0240;
- immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_SPD | PC_REP_RES | PC_BIT14); /* = 0x0246 */
- immr->im_ioport.iop_pcdat |= PC_REP_RES;
- } else {
- immr->im_ioport.iop_pcdat = 0x0002;
- immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_RES | PC_BIT14 | PC_BIT15); /* = 0x0207 */
-
- if ((immr->im_ioport.iop_pcdat & PC_REP_SPD) == 0) {
- /*
- * Revision 2.x hardware: PC9 connected to PB21
- */
- revision = 2;
-
- if (ethspeed == 0) {
- /* both 10 and 100 Mbps allowed:
- * select 10 Mbps and autonegotiation
- */
- puts (" [10+100]");
- immr->im_cpm.cp_pbdat = 0; /* SPD1:SPD0 = 0:0 - autonegot. */
- speed = 10;
- } else if (ethspeed == 10) {
- /* we are asked for 10 Mbps,
- * so select 10 Mbps
- */
- puts (" [10]");
- immr->im_cpm.cp_pbdat = 0; /* ??? */
- speed = 10;
- } else {
- /* anything else:
- * select 100 Mbps
- */
- puts (" [100]");
- immr->im_cpm.cp_pbdat = PC_REP_SPD0 | PC_REP_SPD1;
- /* SPD1:SPD0 = 1:1 - 100 Mbps */
- speed = 100;
- }
- immr->im_ioport.iop_pcdat |= (PC_REP_RES | PC_BIT14);
-
- /* must be run from RAM */
- /* start_lxt980 (speed); */
- /*************************/
- } else {
- /*
- * Revision 1.x hardware
- */
- revision = 1;
-
- immr->im_ioport.iop_pcdat = PC_REP_MGRPRS | PC_BIT14; /* = 0x0202 */
- immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_SPD | PC_REP_RES | PC_BIT14 | PC_BIT15); /* = 0x0247 */
-
- if (ethspeed == 0) {
- /* both 10 and 100 Mbps allowed:
- * select 100 Mbps and autonegotiation
- */
- puts (" [10+100]");
- immr->im_cpm.cp_pbdat = 0; /* SPD1:SPD0 = 0:0 - autonegot. */
- immr->im_ioport.iop_pcdat |= PC_REP_SPD;
- } else if (ethspeed == 10) {
- /* we are asked for 10 Mbps,
- * so select 10 Mbps
- */
- puts (" [10]");
- immr->im_cpm.cp_pbdat = PC_REP_SPD0; /* SPD1:SPD0 = 0:1 - 10 Mbps */
- } else {
- /* anything else:
- * select 100 Mbps
- */
- puts (" [100]");
- immr->im_cpm.cp_pbdat = PC_REP_SPD0 | PC_REP_SPD1;
- /* SPD1:SPD0 = 1:1 - 100 Mbps */
- immr->im_ioport.iop_pcdat |= PC_REP_SPD;
- }
-
- immr->im_ioport.iop_pcdat |= PC_REP_RES;
- }
- }
- SHOW_BOOT_PROGRESS(BOOTSTAGE_ID_CHECK_MAGIC);
-
- return ((revision << 16) | (speed & 0xFFFF));
-}
-
-/* ------------------------------------------------------------------------- */
-
-#define SCC_SM 1 /* Index => SCC2 */
-#define PROFF PROFF_SCC2
-
-#define SMI_MSGLEN 8 /* Length of SMI Messages */
-
-#define PHYGPCR_ADDR 0x109 /* Port Enable */
-#define PHYPCR_ADDR 0x132 /* PHY Port Control Reg. (port 1) */
-#define LEDPCR_ADDR 0x141 /* LED Port Control Reg. */
-#define RPRESET_ADDR 0x144 /* Repeater Reset */
-
-#define PHYPCR_SPEED 0x2000 /* on for 100 Mbps, off for 10 Mbps */
-#define PHYPCR_AN 0x1000 /* on to enable Auto-Negotiation */
-#define PHYPCR_REST_AN 0x0200 /* on to restart Auto-Negotiation */
-#define PHYPCR_FDX 0x0100 /* on for Full Duplex, off for HDX */
-#define PHYPCR_COLT 0x0080 /* on to enable COL signal test */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Must run from RAM:
- * uses parameter RAM area which is used for stack while running from ROM
- */
-void hermes_start_lxt980 (int speed)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = (cpm8xx_t *) & (immr->im_cpm);
- volatile scc_t *sp = (scc_t *) & (cp->cp_scc[SCC_SM]);
- volatile cbd_t *bd;
- volatile hdlc_pram_t *hp;
- uchar smimsg[SMI_MSGLEN];
- ushort phypcrval;
- uint bd_off;
- int pnr;
-
- printf ("LXT9880: %3d Mbps\n", speed);
-
- immr->im_ioport.iop_paodr |= 0x0008; /* init PAODR: PA12 (TXD2) open drain */
- immr->im_ioport.iop_papar |= 0x400c; /* init PAPAR: TXD2, RXD2, BRGO4 */
- immr->im_ioport.iop_padir &= 0xbff3; /* init PADIR: BRGO4 */
- immr->im_ioport.iop_padir |= 0x4000;
-
- /* get temporary BD; no need for permanent alloc */
- bd_off = dpram_base_align (8);
-
- bd = (cbd_t *) (immr->im_cpm.cp_dpmem + bd_off);
-
- bd->cbd_bufaddr = 0;
- bd->cbd_datlen = 0;
- bd->cbd_sc = BD_SC_WRAP | BD_SC_LAST | BD_SC_INTRPT | BD_SC_TC;
-
- /* init. baudrate generator BRG4 */
- cp->cp_brgc4 = (0x00010000 | (50 << 1)); /* output 1 MHz */
-
- cp->cp_sicr &= 0xFFFF00FF; /* SICR: mask SCC2 */
- cp->cp_sicr |= 0x00001B00; /* SICR: SCC2 clk BRG4 */
-
- /* init SCC_SM register */
- sp->scc_psmr = 0x0000; /* init PSMR: no additional flags */
- sp->scc_todr = 0x0000;
- sp->scc_dsr = 0x7e7e;
-
- /* init. SCC_SM parameter area */
- hp = (hdlc_pram_t *) & cp->cp_dparam[PROFF];
-
- hp->tbase = bd_off; /* offset from beginning of DPRAM */
-
- hp->rfcr = 0x18;
- hp->tfcr = 0x18;
- hp->mrblr = 10;
-
- hp->c_mask = 0x0000f0b8;
- hp->c_pres = 0x0000ffff;
-
- hp->disfc = 0;
- hp->crcec = 0;
- hp->abtsc = 0;
- hp->nmarc = 0;
- hp->retrc = 0;
-
- hp->mflr = 10;
-
- hp->rfthr = 1;
-
- hp->hmask = 0;
- hp->haddr1 = 0;
- hp->haddr2 = 0;
- hp->haddr3 = 0;
- hp->haddr4 = 0;
-
- cp->cp_cpcr = SCC_SM << 6 | 0x0001; /* SCC_SM: init TX/RX params */
- while (cp->cp_cpcr & CPM_CR_FLG);
-
- /* clear all outstanding SCC events */
- sp->scc_scce = ~0;
-
- /* enable transmitter: GSMR_L: TPL=2(16bits), TPP=3(all ones), ENT */
- sp->scc_gsmrh = 0;
- sp->scc_gsmrl |= SCC_GSMRL_TPL_16 | SCC_GSMRL_TPP_ALL1 |
- SCC_GSMRL_ENT | SCC_GSMRL_MODE_HDLC;
-
-#if 0
- smimsg[0] = 0x00; /* CHIP/HUB ID */
- smimsg[1] = 0x38; /* WRITE CMD */
- smimsg[2] = (RPRESET_ADDR << 4) & 0xf0;
- smimsg[3] = RPRESET_ADDR >> 4;
- smimsg[4] = 0x01;
- smimsg[5] = 0x00;
- smimsg[6] = 0x00;
- smimsg[7] = 0x00;
-
- send_smi_frame (sp, bd, smimsg);
-#endif
-
- smimsg[0] = 0x7f; /* BROADCAST */
- smimsg[1] = 0x34; /* ASSIGN HUB ID */
- smimsg[2] = 0x00;
- smimsg[3] = 0x00;
- smimsg[4] = 0x00; /* HUB ID = 0 */
- smimsg[5] = 0x00;
- smimsg[6] = 0x00;
- smimsg[7] = 0x00;
-
- send_smi_frame (sp, bd, smimsg);
-
- smimsg[0] = 0x7f; /* BROADCAST */
- smimsg[1] = 0x3c; /* SET ARBOUT TO 0 */
- smimsg[2] = 0x00; /* ADDRESS = 0 */
- smimsg[3] = 0x00;
- smimsg[4] = 0x00; /* DATA = 0 */
- smimsg[5] = 0x00;
- smimsg[6] = 0x00;
- smimsg[7] = 0x00;
-
- send_smi_frame (sp, bd, smimsg);
-
- if (speed == 100) {
- phypcrval = PHYPCR_SPEED; /* 100 MBIT, disable autoneg. */
- } else {
- phypcrval = 0; /* 10 MBIT, disable autoneg. */
- }
-
- /* send MSGs */
- for (pnr = 0; pnr < 8; pnr++) {
- smimsg[0] = 0x00; /* CHIP/HUB ID */
- smimsg[1] = 0x38; /* WRITE CMD */
- smimsg[2] = ((PHYPCR_ADDR + pnr) << 4) & 0xf0;
- smimsg[3] = (PHYPCR_ADDR + pnr) >> 4;
- smimsg[4] = (unsigned char) (phypcrval & 0xff);
- smimsg[5] = (unsigned char) (phypcrval >> 8);
- smimsg[6] = 0x00;
- smimsg[7] = 0x00;
-
- send_smi_frame (sp, bd, smimsg);
- }
-
- smimsg[0] = 0x00; /* CHIP/HUB ID */
- smimsg[1] = 0x38; /* WRITE CMD */
- smimsg[2] = (PHYGPCR_ADDR << 4) & 0xf0;
- smimsg[3] = PHYGPCR_ADDR >> 4;
- smimsg[4] = 0xff; /* enable port 1-8 */
- smimsg[5] = 0x01; /* enable MII1 (0x01) */
- smimsg[6] = 0x00;
- smimsg[7] = 0x00;
-
- send_smi_frame (sp, bd, smimsg);
-
- smimsg[0] = 0x00; /* CHIP/HUB ID */
- smimsg[1] = 0x38; /* WRITE CMD */
- smimsg[2] = (LEDPCR_ADDR << 4) & 0xf0;
- smimsg[3] = LEDPCR_ADDR >> 4;
- smimsg[4] = 0xaa; /* Port 1-8 Conf.bits = 10 (Hardware control) */
- smimsg[5] = 0xaa;
- smimsg[6] = 0x00;
- smimsg[7] = 0x00;
-
- send_smi_frame (sp, bd, smimsg);
-
- /*
- * Disable Transmitter (so that we can free the BD, too)
- */
- sp->scc_gsmrl &= ~SCC_GSMRL_ENT;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void send_smi_frame (volatile scc_t * sp, volatile cbd_t * bd,
- uchar * msg)
-{
-#ifdef DEBUG
- unsigned hub, chip, cmd, length, addr;
-
- hub = msg[0] & 0x1F;
- chip = msg[0] >> 5;
- cmd = msg[1] & 0x1F;
- length = (msg[1] >> 5) | ((msg[2] & 0x0F) << 3);
- addr = (msg[2] >> 4) | (msg[3] << 4);
-
- printf ("SMI send: Hub %02x Chip %x Cmd %02x Len %d Addr %03x: "
- "%02x %02x %02x %02x\n",
- hub, chip, cmd, length, addr, msg[4], msg[5], msg[6], msg[7]);
-#endif /* DEBUG */
-
- bd->cbd_bufaddr = (uint) msg;
- bd->cbd_datlen = SMI_MSGLEN;
- bd->cbd_sc |= BD_SC_READY;
-
- /* wait for msg transmitted */
- while ((sp->scc_scce & 0x0002) == 0);
- /* clear all events */
- sp->scc_scce = ~0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-void show_boot_progress (int status)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- /* let things compatible */
- if (status < -BOOTSTAGE_ID_POST_FAIL_R)
- status = -1;
- status ^= 0x0F;
- status = (status & 0x0F) << 14;
- immr->im_cpm.cp_pbdat = (immr->im_cpm.cp_pbdat & ~PB_LED_ALL) | status;
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/hermes/u-boot.lds b/board/hermes/u-boot.lds
deleted file mode 100644
index 0309860..0000000
--- a/board/hermes/u-boot.lds
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- board/hermes/built-in.o (.text*)
-
- . = env_offset;
- common/env_embedded.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/hermes/u-boot.lds.debug b/board/hermes/u-boot.lds.debug
deleted file mode 100644
index f34c07b..0000000
--- a/board/hermes/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
- arch/powerpc/lib/time.o (.text)
- arch/powerpc/lib/ticks.o (.text)
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/raspberrypi/rpi_b/Kconfig b/board/raspberrypi/rpi/Kconfig
similarity index 71%
rename from board/raspberrypi/rpi_b/Kconfig
rename to board/raspberrypi/rpi/Kconfig
index 501d511..6a538cf 100644
--- a/board/raspberrypi/rpi_b/Kconfig
+++ b/board/raspberrypi/rpi/Kconfig
@@ -1,7 +1,7 @@
-if TARGET_RPI_B
+if TARGET_RPI
config SYS_BOARD
- default "rpi_b"
+ default "rpi"
config SYS_VENDOR
default "raspberrypi"
@@ -10,6 +10,6 @@
default "bcm2835"
config SYS_CONFIG_NAME
- default "rpi_b"
+ default "rpi"
endif
diff --git a/board/raspberrypi/rpi/MAINTAINERS b/board/raspberrypi/rpi/MAINTAINERS
new file mode 100644
index 0000000..6dcb7bd
--- /dev/null
+++ b/board/raspberrypi/rpi/MAINTAINERS
@@ -0,0 +1,6 @@
+RPI BOARD
+M: Stephen Warren <swarren@wwwdotorg.org>
+S: Maintained
+F: board/raspberrypi/rpi/
+F: include/configs/rpi.h
+F: configs/rpi_defconfig
diff --git a/board/raspberrypi/rpi_b/Makefile b/board/raspberrypi/rpi/Makefile
similarity index 96%
rename from board/raspberrypi/rpi_b/Makefile
rename to board/raspberrypi/rpi/Makefile
index 7e9bfbf..c53c92b 100644
--- a/board/raspberrypi/rpi_b/Makefile
+++ b/board/raspberrypi/rpi/Makefile
@@ -12,4 +12,4 @@
# GNU General Public License for more details.
#
-obj-y := rpi_b.o
+obj-y := rpi.o
diff --git a/board/raspberrypi/rpi_b/rpi_b.c b/board/raspberrypi/rpi/rpi.c
similarity index 63%
rename from board/raspberrypi/rpi_b/rpi_b.c
rename to board/raspberrypi/rpi/rpi.c
index db904a4..51a4fa1 100644
--- a/board/raspberrypi/rpi_b/rpi_b.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -42,6 +42,12 @@
u32 end_tag;
};
+struct msg_get_board_rev {
+ struct bcm2835_mbox_hdr hdr;
+ struct bcm2835_mbox_tag_get_board_rev get_board_rev;
+ u32 end_tag;
+};
+
struct msg_get_mac_address {
struct bcm2835_mbox_hdr hdr;
struct bcm2835_mbox_tag_get_mac_address get_mac_address;
@@ -60,6 +66,67 @@
u32 end_tag;
};
+/* See comments in mbox.h for data source */
+static const struct {
+ const char *name;
+ const char *fdtfile;
+} models[] = {
+ [BCM2835_BOARD_REV_B_I2C0_2] = {
+ "Model B (no P5)",
+ "bcm2835-rpi-b-i2c0.dtb",
+ },
+ [BCM2835_BOARD_REV_B_I2C0_3] = {
+ "Model B (no P5)",
+ "bcm2835-rpi-b-i2c0.dtb",
+ },
+ [BCM2835_BOARD_REV_B_I2C1_4] = {
+ "Model B",
+ "bcm2835-rpi-b.dtb",
+ },
+ [BCM2835_BOARD_REV_B_I2C1_5] = {
+ "Model B",
+ "bcm2835-rpi-b.dtb",
+ },
+ [BCM2835_BOARD_REV_B_I2C1_6] = {
+ "Model B",
+ "bcm2835-rpi-b.dtb",
+ },
+ [BCM2835_BOARD_REV_A_7] = {
+ "Model A",
+ "bcm2835-rpi-a.dtb",
+ },
+ [BCM2835_BOARD_REV_A_8] = {
+ "Model A",
+ "bcm2835-rpi-a.dtb",
+ },
+ [BCM2835_BOARD_REV_A_9] = {
+ "Model A",
+ "bcm2835-rpi-a.dtb",
+ },
+ [BCM2835_BOARD_REV_B_REV2_d] = {
+ "Model B rev2",
+ "bcm2835-rpi-b-rev2.dtb",
+ },
+ [BCM2835_BOARD_REV_B_REV2_e] = {
+ "Model B rev2",
+ "bcm2835-rpi-b-rev2.dtb",
+ },
+ [BCM2835_BOARD_REV_B_REV2_f] = {
+ "Model B rev2",
+ "bcm2835-rpi-b-rev2.dtb",
+ },
+ [BCM2835_BOARD_REV_B_PLUS] = {
+ "Model B+",
+ "bcm2835-rpi-b-plus.dtb",
+ },
+ [BCM2835_BOARD_REV_CM] = {
+ "Compute Module",
+ "bcm2835-rpi-cm.dtb",
+ },
+};
+
+u32 rpi_board_rev = 0;
+
int dram_init(void)
{
ALLOC_ALIGN_BUFFER(struct msg_get_arm_mem, msg, 1, 16);
@@ -79,13 +146,27 @@
return 0;
}
-int misc_init_r(void)
+static void set_fdtfile(void)
+{
+ const char *fdtfile;
+
+ if (getenv("fdtfile"))
+ return;
+
+ fdtfile = models[rpi_board_rev].fdtfile;
+ if (!fdtfile)
+ fdtfile = "bcm2835-rpi-other.dtb";
+
+ setenv("fdtfile", fdtfile);
+}
+
+static void set_usbethaddr(void)
{
ALLOC_ALIGN_BUFFER(struct msg_get_mac_address, msg, 1, 16);
int ret;
if (getenv("usbethaddr"))
- return 0;
+ return;
BCM2835_MBOX_INIT_HDR(msg);
BCM2835_MBOX_INIT_TAG(&msg->get_mac_address, GET_MAC_ADDRESS);
@@ -94,11 +175,18 @@
if (ret) {
printf("bcm2835: Could not query MAC address\n");
/* Ignore error; not critical */
- return 0;
+ return;
}
eth_setenv_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac);
+ return;
+}
+
+int misc_init_r(void)
+{
+ set_fdtfile();
+ set_usbethaddr();
return 0;
}
@@ -126,8 +214,36 @@
return 0;
}
+static void get_board_rev(void)
+{
+ ALLOC_ALIGN_BUFFER(struct msg_get_board_rev, msg, 1, 16);
+ int ret;
+ const char *name;
+
+ BCM2835_MBOX_INIT_HDR(msg);
+ BCM2835_MBOX_INIT_TAG(&msg->get_board_rev, GET_BOARD_REV);
+
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
+ if (ret) {
+ printf("bcm2835: Could not query board revision\n");
+ /* Ignore error; not critical */
+ return;
+ }
+
+ rpi_board_rev = msg->get_board_rev.body.resp.rev;
+ if (rpi_board_rev >= ARRAY_SIZE(models))
+ rpi_board_rev = 0;
+
+ name = models[rpi_board_rev].name;
+ if (!name)
+ name = "Unknown model";
+ printf("RPI model: %s\n", name);
+}
+
int board_init(void)
{
+ get_board_rev();
+
gd->bd->bi_boot_params = 0x100;
return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
diff --git a/board/raspberrypi/rpi_b/MAINTAINERS b/board/raspberrypi/rpi_b/MAINTAINERS
deleted file mode 100644
index 14f3948..0000000
--- a/board/raspberrypi/rpi_b/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-RPI_B BOARD
-M: Stephen Warren <swarren@wwwdotorg.org>
-S: Maintained
-F: board/raspberrypi/rpi_b/
-F: include/configs/rpi_b.h
-F: configs/rpi_b_defconfig
diff --git a/common/board_r.c b/common/board_r.c
index 1b8998d..4eb7a02 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -291,26 +291,14 @@
{
ulong flash_size = 0;
bd_t *bd = gd->bd;
- int ok;
puts("Flash: ");
- if (board_flash_wp_on()) {
+ if (board_flash_wp_on())
printf("Uninitialized - Write Protect On\n");
- /* Since WP is on, we can't find real size. Set to 0 */
- ok = 1;
- } else {
+ else
flash_size = flash_init();
- ok = flash_size > 0;
- }
- if (!ok) {
- puts("*** failed ***\n");
-#ifdef CONFIG_PPC
- /* Why does PPC do this? */
- hang();
-#endif
- return -1;
- }
+
print_size(flash_size, "");
#ifdef CONFIG_SYS_FLASH_CHECKSUM
/*
@@ -454,24 +442,6 @@
return 0;
}
-#ifdef CONFIG_HERMES
-static int initr_hermes(void)
-{
- if ((gd->board_type >> 16) == 2)
- gd->bd->bi_ethspeed = gd->board_type & 0xFFFF;
- else
- gd->bd->bi_ethspeed = 0xFFFF;
- return 0;
-}
-
-static int initr_hermes_start(void)
-{
- if (gd->bd->bi_ethspeed != 0xFFFF)
- hermes_start_lxt980((int) gd->bd->bi_ethspeed);
- return 0;
-}
-#endif
-
#ifdef CONFIG_SC3
/* TODO: with new initcalls, move this into the driver */
extern void sc3_read_eeprom(void);
@@ -803,9 +773,6 @@
#ifdef CONFIG_SC3
initr_sc3_read_eeprom,
#endif
-#ifdef CONFIG_HERMES
- initr_hermes,
-#endif
#if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET)
mac_read_from_eeprom,
#endif
@@ -831,9 +798,6 @@
#ifdef CONFIG_MISC_INIT_R
misc_init_r, /* miscellaneous platform-dependent init */
#endif
-#ifdef CONFIG_HERMES
- initr_hermes_start,
-#endif
INIT_FUNC_WATCHDOG_RESET
#ifdef CONFIG_CMD_KGDB
initr_kgdb,
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 3d37a86..f0b713c 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -144,9 +144,6 @@
print_eth(5);
#endif
-#ifdef CONFIG_HERMES
- print_mhz("ethspeed", bd->bi_ethspeed);
-#endif
printf("IP addr = %s\n", getenv("ipaddr"));
printf("baudrate = %6u bps\n", gd->baudrate);
print_num("relocaddr", gd->relocaddr);
diff --git a/common/cmd_fuse.c b/common/cmd_fuse.c
index abab978..d4bc0f6 100644
--- a/common/cmd_fuse.c
+++ b/common/cmd_fuse.c
@@ -128,7 +128,7 @@
err:
puts("ERROR\n");
- return ret;
+ return CMD_RET_FAILURE;
}
U_BOOT_CMD(
diff --git a/common/console.c b/common/console.c
index 4695386..29560c3 100644
--- a/common/console.c
+++ b/common/console.c
@@ -125,12 +125,12 @@
*/
switch (file) {
case stdin:
- gd->jt[XF_getc] = dev->getc;
- gd->jt[XF_tstc] = dev->tstc;
+ gd->jt[XF_getc] = getc;
+ gd->jt[XF_tstc] = tstc;
break;
case stdout:
- gd->jt[XF_putc] = dev->putc;
- gd->jt[XF_puts] = dev->puts;
+ gd->jt[XF_putc] = putc;
+ gd->jt[XF_puts] = puts;
gd->jt[XF_printf] = printf;
break;
}
diff --git a/common/image-fdt.c b/common/image-fdt.c
index 8db3ccb..e3f06cd 100644
--- a/common/image-fdt.c
+++ b/common/image-fdt.c
@@ -237,6 +237,7 @@
int fdt_noffset;
#endif
const char *select = NULL;
+ int ok_no_fdt = 0;
*of_flat_tree = NULL;
*of_size = 0;
@@ -309,7 +310,7 @@
fdt_addr);
fdt_hdr = image_get_fdt(fdt_addr);
if (!fdt_hdr)
- goto error;
+ goto no_fdt;
/*
* move image data to the load address,
@@ -379,7 +380,7 @@
break;
default:
puts("ERROR: Did not find a cmdline Flattened Device Tree\n");
- goto error;
+ goto no_fdt;
}
printf(" Booting using the fdt blob at %#08lx\n", fdt_addr);
@@ -413,11 +414,11 @@
}
} else {
debug("## No Flattened Device Tree\n");
- return 0;
+ goto no_fdt;
}
} else {
debug("## No Flattened Device Tree\n");
- return 0;
+ goto no_fdt;
}
*of_flat_tree = fdt_blob;
@@ -427,9 +428,15 @@
return 0;
+no_fdt:
+ ok_no_fdt = 1;
error:
*of_flat_tree = NULL;
*of_size = 0;
+ if (!select && ok_no_fdt) {
+ debug("Continuing to boot without FDT\n");
+ return 0;
+ }
return 1;
}
diff --git a/common/lcd.c b/common/lcd.c
index 28b3fe7..3ed504d 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -530,7 +530,7 @@
lcd_ctrl_init(lcdbase);
/*
- * lcd_ctrl_init() of some drivers (i.e. bcm2835 on rpi_b) ignores
+ * lcd_ctrl_init() of some drivers (i.e. bcm2835 on rpi) ignores
* the 'lcdbase' argument and uses custom lcd base address
* by setting up gd->fb_base. Check for this condition and fixup
* 'lcd_base' address.
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index ee71f79..7bae16b 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -15,7 +15,7 @@
DECLARE_GLOBAL_DATA_PTR;
-static int mmc_load_image_raw(struct mmc *mmc, unsigned long sector)
+static int mmc_load_image_raw_sector(struct mmc *mmc, unsigned long sector)
{
unsigned long err;
u32 image_size_sectors;
@@ -51,6 +51,22 @@
return (err == 0);
}
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
+static int mmc_load_image_raw_partition(struct mmc *mmc, int partition)
+{
+ disk_partition_t info;
+
+ if (get_partition_info(&mmc->block_dev, partition, &info)) {
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
+ printf("spl: partition error\n");
+#endif
+ return -1;
+ }
+
+ return mmc_load_image_raw_sector(mmc, info.start);
+}
+#endif
+
#ifdef CONFIG_SPL_OS_BOOT
static int mmc_load_image_raw_os(struct mmc *mmc)
{
@@ -64,7 +80,8 @@
return -1;
}
- return mmc_load_image_raw(mmc, CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR);
+ return mmc_load_image_raw_sector(mmc,
+ CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR);
}
#endif
@@ -98,18 +115,24 @@
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || mmc_load_image_raw_os(mmc))
#endif
- err = mmc_load_image_raw(mmc,
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
+ err = mmc_load_image_raw_partition(mmc,
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION);
+#else
+ err = mmc_load_image_raw_sector(mmc,
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
+#endif
#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
- } else if (boot_mode == MMCSD_MODE_FS) {
+ }
+ if (err || boot_mode == MMCSD_MODE_FS) {
debug("boot mode - FS\n");
#ifdef CONFIG_SPL_FAT_SUPPORT
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || spl_load_image_fat_os(&mmc->block_dev,
- CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION))
+ CONFIG_SYS_MMCSD_FS_BOOT_PARTITION))
#endif
err = spl_load_image_fat(&mmc->block_dev,
- CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION,
+ CONFIG_SYS_MMCSD_FS_BOOT_PARTITION,
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
if(err)
#endif /* CONFIG_SPL_FAT_SUPPORT */
@@ -117,10 +140,10 @@
#ifdef CONFIG_SPL_EXT_SUPPORT
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || spl_load_image_ext_os(&mmc->block_dev,
- CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION))
+ CONFIG_SYS_MMCSD_FS_BOOT_PARTITION))
#endif
err = spl_load_image_ext(&mmc->block_dev,
- CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION,
+ CONFIG_SYS_MMCSD_FS_BOOT_PARTITION,
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
#endif /* CONFIG_SPL_EXT_SUPPORT */
}
@@ -146,7 +169,7 @@
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || mmc_load_image_raw_os(mmc))
#endif
- err = mmc_load_image_raw(mmc,
+ err = mmc_load_image_raw_sector(mmc,
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
#endif
} else {
diff --git a/common/usb.c b/common/usb.c
index 7d33a0f..736cd9f 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -33,7 +33,6 @@
#include <linux/ctype.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
-#include <compiler.h>
#include <errno.h>
#include <usb.h>
#ifdef CONFIG_4xx
diff --git a/configs/hermes_defconfig b/configs/hermes_defconfig
deleted file mode 100644
index a923a61..0000000
--- a/configs/hermes_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_8xx=y
-CONFIG_TARGET_HERMES=y
diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig
index de068e9..3155340 100644
--- a/configs/ph1_ld4_defconfig
+++ b/configs/ph1_ld4_defconfig
@@ -4,6 +4,7 @@
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_UNIPHIER=y
+S:CONFIG_MACH_PH1_LD4=y
++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BDI=y
CONFIG_CMD_CONSOLE=y
diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig
index f4ddf5f..7ea4e6e 100644
--- a/configs/ph1_pro4_defconfig
+++ b/configs/ph1_pro4_defconfig
@@ -4,6 +4,7 @@
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_UNIPHIER=y
+S:CONFIG_MACH_PH1_PRO4=y
++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BDI=y
CONFIG_CMD_CONSOLE=y
diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig
index ee14382..ddf210c 100644
--- a/configs/ph1_sld8_defconfig
+++ b/configs/ph1_sld8_defconfig
@@ -4,6 +4,7 @@
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_UNIPHIER=y
+S:CONFIG_MACH_PH1_SLD8=y
++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BDI=y
CONFIG_CMD_CONSOLE=y
diff --git a/configs/rpi_b_defconfig b/configs/rpi_b_defconfig
deleted file mode 100644
index 9a4705e..0000000
--- a/configs/rpi_b_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_RPI_B=y
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
new file mode 100644
index 0000000..9379cf0
--- /dev/null
+++ b/configs/rpi_defconfig
@@ -0,0 +1,2 @@
+CONFIG_ARM=y
+CONFIG_TARGET_RPI=y
diff --git a/doc/README.clang b/doc/README.clang
index 52495d3..fe36909 100644
--- a/doc/README.clang
+++ b/doc/README.clang
@@ -28,7 +28,7 @@
To compile U-Boot with clang on linux without IAS use e.g.:
export TRIPLET=arm-linux-gnueabi && export CROSS_COMPILE="$TRIPLET-"
-make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrated-as" rpi_b_defconfig
+make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrated-as" rpi_defconfig
make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrated-as" all V=1 -j8
FreeBSD 11 (Current):
@@ -42,7 +42,7 @@
# The following commands compile U-Boot using the clang xdev toolchain.
# NOTE: CROSS_COMPILE and target differ on purpose!
export CROSS_COMPILE=arm-gnueabi-freebsd-
-gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" rpi_b_defconfig
+gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" rpi_defconfig
gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" -j8
Given that u-boot will default to gcc, above commands can be
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 8ba6e0a..deb4af4 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,8 +12,9 @@
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
-PRS200 powerpc mpc5200 - -
-MCC200 powerpc mpc5200 - -
+hermes powerpc mpc8xx - - Wolfgang Denk <wd@denx.de>
+PRS200 powerpc mpc5200 ecfdcee 2014-11-12
+MCC200 powerpc mpc5200 ecfdcee 2014-11-12
TOP5200 powerpc mpc5200 d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
TOP860 powerpc mpc860 d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
TOP9000 arm at91sam9xeXXX d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
diff --git a/doc/git-mailrc b/doc/git-mailrc
index ad22763..6c79a6d 100644
--- a/doc/git-mailrc
+++ b/doc/git-mailrc
@@ -14,6 +14,9 @@
alias abiessmann Andreas Bießmann <andreas.devel@googlemail.com>
alias afleming Andy Fleming <afleming@gmail.com>
alias ag Anatolij Gustschin <agust@denx.de>
+alias alisonwang Alison Wang <alison.wang@freescale.com>
+alias angelo_ts Angelo Dureghello <angelo@sysam.it>
+alias danielschwierzeck Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
alias galak Kumar Gala <galak@kernel.crashing.org>
alias gruss Graeme Russ <graeme.russ@gmail.com>
alias hs Heiko Schocher <hs@denx.de>
@@ -72,13 +75,13 @@
alias bfin uboot, vapier, sonic
alias blackfin bfin
-alias m68k uboot, jasonjin
+alias m68k uboot, alisonwang, angelo_ts
alias coldfire m68k
alias microblaze uboot, monstr
alias mb microblaze
-alias mips uboot, Shinya Kuribayashi <skuribay@pobox.com>
+alias mips uboot, danielschwierzeck
alias nds32 uboot, macpaul
@@ -119,6 +122,7 @@
alias nand uboot, scottwood
alias net uboot, jhersh
alias spi uboot, jagan
+alias ubi uboot, hs
alias usb uboot, marex
alias video uboot, ag
alias patman uboot, sjg
diff --git a/drivers/block/pata_bfin.h b/drivers/block/pata_bfin.h
index 2093cf0..b678f60 100644
--- a/drivers/block/pata_bfin.h
+++ b/drivers/block/pata_bfin.h
@@ -43,7 +43,6 @@
#define DRV_NAME "pata-bfin"
#define DRV_VERSION "0.9"
-#define __iomem
#define ATA_REG_CTRL 0x0E
#define ATA_REG_ALTSTATUS ATA_REG_CTRL
diff --git a/drivers/mmc/sh_mmcif.c b/drivers/mmc/sh_mmcif.c
index ed83a14..76ba93b 100644
--- a/drivers/mmc/sh_mmcif.c
+++ b/drivers/mmc/sh_mmcif.c
@@ -103,20 +103,18 @@
static void sh_mmcif_clock_control(struct sh_mmcif_host *host, unsigned int clk)
{
- int i;
-
sh_mmcif_bitclr(CLK_ENABLE, &host->regs->ce_clk_ctrl);
sh_mmcif_bitclr(CLK_CLEAR, &host->regs->ce_clk_ctrl);
if (!clk)
return;
- if (clk == CLKDEV_EMMC_DATA) {
+
+ if (clk == CLKDEV_EMMC_DATA)
sh_mmcif_bitset(CLK_PCLK, &host->regs->ce_clk_ctrl);
- } else {
- for (i = 1; (unsigned int)host->clk / (1 << i) >= clk; i++)
- ;
- sh_mmcif_bitset((i - 1) << 16, &host->regs->ce_clk_ctrl);
- }
+ else
+ sh_mmcif_bitset((fls(DIV_ROUND_UP(host->clk,
+ clk) - 1) - 1) << 16,
+ &host->regs->ce_clk_ctrl);
sh_mmcif_bitset(CLK_ENABLE, &host->regs->ce_clk_ctrl);
}
@@ -581,8 +579,6 @@
.host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT |
MMC_MODE_8BIT | MMC_MODE_HC,
.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
- .f_min = CLKDEV_MMC_INIT,
- .f_max = CLKDEV_EMMC_DATA,
.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT,
};
@@ -599,6 +595,9 @@
host->regs = (struct sh_mmcif_regs *)CONFIG_SH_MMCIF_ADDR;
host->clk = CONFIG_SH_MMCIF_CLK;
+ sh_mmcif_cfg.f_min = MMC_CLK_DIV_MIN(host->clk);
+ sh_mmcif_cfg.f_max = MMC_CLK_DIV_MAX(host->clk);
+
mmc = mmc_create(&sh_mmcif_cfg, host);
if (mmc == NULL) {
free(host);
diff --git a/drivers/mmc/sh_mmcif.h b/drivers/mmc/sh_mmcif.h
index bd6fbf7..4b6752f 100644
--- a/drivers/mmc/sh_mmcif.h
+++ b/drivers/mmc/sh_mmcif.h
@@ -199,7 +199,13 @@
#define SOFT_RST_OFF (0 << 31)
#define CLKDEV_EMMC_DATA 52000000 /* 52MHz */
-#define CLKDEV_MMC_INIT 400000 /* 100 - 400 KHz */
+#ifdef CONFIG_RMOBILE
+#define MMC_CLK_DIV_MIN(clk) (clk / (1 << 9))
+#define MMC_CLK_DIV_MAX(clk) (clk / (1 << 1))
+#else
+#define MMC_CLK_DIV_MIN(clk) (clk / (1 << 8))
+#define MMC_CLK_DIV_MAX(clk) CLKDEV_EMMC_DATA
+#endif
#define MMC_BUS_WIDTH_1 0
#define MMC_BUS_WIDTH_4 2
diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c
index 594cd11..0dcf9fe 100644
--- a/drivers/power/power_i2c.c
+++ b/drivers/power/power_i2c.c
@@ -14,7 +14,7 @@
#include <linux/types.h>
#include <power/pmic.h>
#include <i2c.h>
-#include <compiler.h>
+#include <linux/compiler.h>
int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
{
diff --git a/drivers/rtc/mvrtc.h b/drivers/rtc/mvrtc.h
index ebddc12..424743c 100644
--- a/drivers/rtc/mvrtc.h
+++ b/drivers/rtc/mvrtc.h
@@ -13,7 +13,7 @@
#define _MVRTC_H_
#include <asm/arch/soc.h>
-#include <compiler.h>
+#include <linux/compiler.h>
/* RTC registers */
struct mvrtc_registers {
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index 38dda91..e1bf496 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -72,30 +72,39 @@
static int pl01x_generic_serial_init(struct pl01x_regs *regs,
enum pl01x_type type)
{
- unsigned int lcr;
-
+ switch (type) {
+ case TYPE_PL010:
+ /* disable everything */
+ writel(0, ®s->pl010_cr);
+ break;
+ case TYPE_PL011:
#ifdef CONFIG_PL011_SERIAL_FLUSH_ON_INIT
- if (type == TYPE_PL011) {
/* Empty RX fifo if necessary */
if (readl(®s->pl011_cr) & UART_PL011_CR_UARTEN) {
while (!(readl(®s->fr) & UART_PL01x_FR_RXFE))
readl(®s->dr);
}
- }
#endif
-
- /* First, disable everything */
- writel(0, ®s->pl010_cr);
-
- /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
- lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN;
- writel(lcr, ®s->pl011_lcrh);
-
- switch (type) {
- case TYPE_PL010:
+ /* disable everything */
+ writel(0, ®s->pl011_cr);
break;
- case TYPE_PL011: {
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int set_line_control(struct pl01x_regs *regs)
+{
+ unsigned int lcr;
+ /*
+ * Internal update of baud rate register require line
+ * control register write
+ */
+ lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN;
#ifdef CONFIG_PL011_SERIAL_RLCR
+ {
int i;
/*
@@ -107,15 +116,9 @@
writel(lcr, ®s->fr);
writel(lcr, ®s->pl011_rlcr);
- /* lcrh needs to be set again for change to be effective */
- writel(lcr, ®s->pl011_lcrh);
+ }
#endif
- break;
- }
- default:
- return -EINVAL;
- }
-
+ writel(lcr, ®s->pl011_lcrh);
return 0;
}
@@ -175,6 +178,7 @@
writel(divider, ®s->pl011_ibrd);
writel(fraction, ®s->pl011_fbrd);
+ set_line_control(regs);
/* Finally, enable the UART */
writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
UART_PL011_CR_RXE | UART_PL011_CR_RTS, ®s->pl011_cr);
@@ -201,7 +205,7 @@
base_regs = (struct pl01x_regs *)port[CONFIG_CONS_INDEX];
pl01x_generic_serial_init(base_regs, pl01x_type);
- pl01x_generic_setbrg(base_regs, TYPE_PL010, clock, baudrate);
+ pl01x_generic_setbrg(base_regs, pl01x_type, clock, baudrate);
}
/*
diff --git a/drivers/tpm/tpm.c b/drivers/tpm/tpm.c
index bc0f964..31761ec 100644
--- a/drivers/tpm/tpm.c
+++ b/drivers/tpm/tpm.c
@@ -34,7 +34,7 @@
#include <config.h>
#include <common.h>
-#include <compiler.h>
+#include <linux/compiler.h>
#include <fdtdec.h>
#include <i2c.h>
#include <tpm.h>
diff --git a/drivers/tpm/tpm_tis_i2c.c b/drivers/tpm/tpm_tis_i2c.c
index 2dd8501..c1bbed4 100644
--- a/drivers/tpm/tpm_tis_i2c.c
+++ b/drivers/tpm/tpm_tis_i2c.c
@@ -38,7 +38,7 @@
#include <common.h>
#include <fdtdec.h>
-#include <compiler.h>
+#include <linux/compiler.h>
#include <i2c.h>
#include <tpm.h>
#include <asm-generic/errno.h>
diff --git a/include/common.h b/include/common.h
index 94c354b..46f07fe 100644
--- a/include/common.h
+++ b/include/common.h
@@ -445,11 +445,6 @@
extern ssize_t spi_write (uchar *, int, uchar *, int);
#endif
-#ifdef CONFIG_HERMES
-/* $(BOARD)/hermes.c */
-void hermes_start_lxt980 (int speed);
-#endif
-
#ifdef CONFIG_EVB64260
void evb64260_init(void);
void debug_led(int, int);
diff --git a/include/commproc.h b/include/commproc.h
index d78ab00..6875c4c 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -535,34 +535,6 @@
#define SICR_ENET_CLKRT ((uint)0x00002600)
#endif /* CONFIG_FPS850L, CONFIG_FPS860L */
-/*** HERMES-PRO ******************************************************/
-
-/* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */
-
-#ifdef CONFIG_HERMES
-
-#define FEC_ENET /* use FEC for EThernet */
-#undef SCC_ENET
-
-
-#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
-#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
-#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
-#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
-#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
-#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
-#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
-#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
-#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
-#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
-#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
-#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
-#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
-
-#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
-
-#endif /* CONFIG_HERMES */
-
/*** IP860 **********************************************************/
#if defined(CONFIG_IP860)
diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index 120fdc6..d23d2c4 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -418,8 +418,6 @@
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NOR_SUPPORT
#define CONFIG_SPL_TEXT_BASE 0xfc000000
-#define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/mpc5xxx"
-#define CONFIG_SPL_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */
#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */
#define CONFIG_SPL_SERIAL_SUPPORT
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 0fbfa3f..09ee10c 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -304,7 +304,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 8719f76..190ef0e 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -313,7 +313,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 1919cde..ccd9b88 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -321,7 +321,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index ca62461..930b08e 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -299,7 +299,7 @@
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
diff --git a/include/configs/hermes.h b/include/configs/hermes.h
deleted file mode 100644
index 736ffb61..0000000
--- a/include/configs/hermes.h
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC860 1 /* This is a MPC860T CPU */
-#define CONFIG_HERMES 1 /* ...on a HERMES-PRO board */
-
-#define CONFIG_SYS_TEXT_BASE 0xFE000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#define CONFIG_BOARD_TYPES 1 /* support board types */
-
-#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-
-#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */
-
-#define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000 /* Non-Standard value! */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFE000000
-#ifdef DEBUG
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 124 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x4000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- * +0x0004
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * +0x0000 => 0x000000C0
- */
-#define CONFIG_SYS_SIUMCR 0
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- * +0x0200 => 0x00C2
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- * +0x0240 => 0x0082
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit, set PLL multiplication factor !
- */
-/* +0x0286 => 0x00B0D0C0 */
-#define CONFIG_SYS_PLPRCR \
- ( (11 << PLPRCR_MF_SHIFT) | \
- PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | \
- /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL | \
- PLPRCR_CSR | PLPRCR_LOLRE /*|PLPRCR_FIOPD*/ \
- )
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-/* +0x0282 => 0x03800000 */
-#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS | \
- SCCR_RTDIV | SCCR_RTSEL | \
- /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \
- SCCR_EBDF00 | SCCR_DFSYNC00 | \
- SCCR_DFBRG00 | SCCR_DFNL000 | \
- SCCR_DFNH000)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-/* +0x0220 => 0x00C3 */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration Register 19-4
- *-----------------------------------------------------------------------
- */
-/* +0x09C4 => TIMEP=1 */
-#define CONFIG_SYS_RCCR 0x0100
-
-/*-----------------------------------------------------------------------
- * RMDS - RISC Microcode Development Support Control Register
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RMDS 0
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0xFE000000 /* FLASH bank #0 */
-
-/* used to re-map FLASH
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-/* allow for max 4 MB of Flash */
-#define CONFIG_SYS_REMAP_OR_AM 0xFFC00000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 1, CSNT = 1, SCY = 5, EHTR = 0 */
-#define CONFIG_SYS_OR_TIMING_FLASH ( OR_CSNT_SAM | /*OR_ACS_DIV4 |*/ OR_BI | \
- OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-/* 8 bit, bank valid */
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-/*
- * BR1/OR1 - SDRAM
- *
- * Multiplexed addresses, GPL5 output to GPL5_A (don't care)
- */
-#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM bank */
-#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */
-#define SDRAM_TIMING 0x00000A00 /* SDRAM-Timing */
-
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB SDRAM */
-
-#define CONFIG_SYS_OR1_PRELIM (SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
-#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/*
- * BR2/OR2 - HPRO2: PEB2256 @ 0xE0000000, 8 Bit wide
- */
-#define HPRO2_BASE 0xE0000000
-#define HPRO2_OR_AM 0xFFFF8000
-#define HPRO2_TIMING 0x00000934
-
-#define CONFIG_SYS_OR2 (HPRO2_OR_AM | HPRO2_TIMING)
-#define CONFIG_SYS_BR2 ((HPRO2_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-/*
- * BR3/OR3: not used
- * BR4/OR4: not used
- * BR5/OR5: not used
- * BR6/OR6: not used
- * BR7/OR7: not used
- */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-#endif /* __CONFIG_H */
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index 5a5f940..1b9c277 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -28,7 +28,6 @@
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x00908000
#define CONFIG_SPL_MAX_SIZE 0x10000
-#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7"
#define CONFIG_SPL_STACK 0x0091FFB8
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
@@ -46,7 +45,7 @@
#if defined(CONFIG_SPL_MMC_SUPPORT)
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 138 /* offset 69KB */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024)
#endif
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 58e7295..d43db52 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -671,8 +671,6 @@
#define CONFIG_SPL_TEXT_BASE 0xffff0000 /* last 64 KiB for SPL */
#define CONFIG_SYS_SPL_MAX_LEN (64 << 10)
#define CONFIG_UBOOT_PAD_TO 458752 /* decimal for 'dd' */
-#define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/ppc4xx"
-#define CONFIG_SPL_LDSCRIPT "arch/powerpc/cpu/ppc4xx/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */
#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */
#define CONFIG_SPL_SERIAL_SUPPORT
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index b775ebd..26eb220 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -369,7 +369,7 @@
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
/* NAND boot config */
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 27bf89c..8bdc08f 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -75,7 +75,7 @@
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
/* Partition tables */
diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h
index 2daf13c..1185f42 100644
--- a/include/configs/omap3_evm_quick_mmc.h
+++ b/include/configs/omap3_evm_quick_mmc.h
@@ -87,7 +87,7 @@
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif /* __OMAP3_EVM_QUICK_MMC_H */
diff --git a/include/configs/ph1_ld4.h b/include/configs/ph1_ld4.h
deleted file mode 100644
index 73a95e6..0000000
--- a/include/configs/ph1_ld4.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __PH1_XXX_H
-#define __PH1_XXX_H
-
-/*
- * Support Card Select
- *
- * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
- * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
- * CPLD is re-programmed for ARIMA board compatibility.
- * No define - No support card.
- */
-
-#if 0
-#define CONFIG_PFC_MICRO_SUPPORT_CARD
-#else
-#define CONFIG_DCC_MICRO_SUPPORT_CARD
-#endif
-
-/*
- * Serial Configuration
- * SoC UART : enable CONFIG_UNIPHIER_SERIAL
- * On-board UART: enable CONFIG_SYS_NS16550_SERIAL
- */
-#if 0
-#define CONFIG_SYS_NS16550_SERIAL
-#endif
-
-#define CONFIG_SMC911X
-
-#define CONFIG_DDR_NUM_CH0 1
-#define CONFIG_DDR_NUM_CH1 1
-
-/*
- * Memory Size & Mapping
- */
-/* Physical start address of SDRAM */
-#define CONFIG_SDRAM0_BASE 0x80000000
-#define CONFIG_SDRAM0_SIZE 0x10000000
-#define CONFIG_SDRAM1_BASE 0x90000000
-#define CONFIG_SDRAM1_SIZE 0x10000000
-
-#define CONFIG_SPL_TEXT_BASE 0x40000
-
-#include "uniphier-common.h"
-
-#endif /* __PH1_XXX_H */
diff --git a/include/configs/ph1_pro4.h b/include/configs/ph1_pro4.h
deleted file mode 100644
index fc5132d..0000000
--- a/include/configs/ph1_pro4.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __PH1_XXX_H
-#define __PH1_XXX_H
-
-/*
- * Support Card Select
- *
- * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
- * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
- * CPLD is re-programmed for ARIMA board compatibility.
- * No define - No support card.
- */
-
-#if 0
-#define CONFIG_PFC_MICRO_SUPPORT_CARD
-#else
-#define CONFIG_DCC_MICRO_SUPPORT_CARD
-#endif
-
-/*
- * Serial Configuration
- * SoC UART : enable CONFIG_UNIPHIER_SERIAL
- * On-board UART: enable CONFIG_SYS_NS16550_SERIAL
- */
-#if 0
-#define CONFIG_SYS_NS16550_SERIAL
-#endif
-
-#define CONFIG_SMC911X
-
-#define CONFIG_DDR_NUM_CH0 2
-#define CONFIG_DDR_NUM_CH1 2
-
-#define CONFIG_UNIPHIER_SMP
-
-/*
- * Memory Size & Mapping
- */
-/* Physical start address of SDRAM */
-#define CONFIG_SDRAM0_BASE 0x80000000
-#define CONFIG_SDRAM0_SIZE 0x20000000
-#define CONFIG_SDRAM1_BASE 0xa0000000
-#define CONFIG_SDRAM1_SIZE 0x20000000
-
-#define CONFIG_SPL_TEXT_BASE 0x100000
-
-#include "uniphier-common.h"
-
-#endif /* __PH1_XXX_H */
diff --git a/include/configs/ph1_sld8.h b/include/configs/ph1_sld8.h
deleted file mode 100644
index e2f1102..0000000
--- a/include/configs/ph1_sld8.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __PH1_XXX_H
-#define __PH1_XXX_H
-
-/*
- * Support Card Select
- *
- * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
- * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
- * CPLD is re-programmed for ARIMA board compatibility.
- * No define - No support card.
- */
-
-#if 0
-#define CONFIG_PFC_MICRO_SUPPORT_CARD
-#else
-#define CONFIG_DCC_MICRO_SUPPORT_CARD
-#endif
-
-/*
- * Serial Configuration
- * SoC UART : enable CONFIG_UNIPHIER_SERIAL
- * On-board UART: enable CONFIG_SYS_NS16550_SERIAL
- */
-#if 0
-#define CONFIG_SYS_NS16550_SERIAL
-#endif
-
-#define CONFIG_SMC911X
-
-#define CONFIG_DDR_NUM_CH0 1
-#define CONFIG_DDR_NUM_CH1 1
-
-/* #define CONFIG_DDR_STANDARD */
-
-/*
- * Memory Size & Mapping
- */
-/* Physical start address of SDRAM */
-#define CONFIG_SDRAM0_BASE 0x80000000
-#define CONFIG_SDRAM0_SIZE 0x10000000
-#define CONFIG_SDRAM1_BASE 0x90000000
-#define CONFIG_SDRAM1_SIZE 0x10000000
-
-#define CONFIG_SPL_TEXT_BASE 0x40000
-
-#include "uniphier-common.h"
-
-#endif /* __PH1_XXX_H */
diff --git a/include/configs/rpi_b.h b/include/configs/rpi.h
similarity index 95%
rename from include/configs/rpi_b.h
rename to include/configs/rpi.h
index 41e975f..4d5426e 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi.h
@@ -105,15 +105,15 @@
/* Environment */
#define CONFIG_ENV_SIZE SZ_16K
-#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE "mmc"
+#define FAT_ENV_DEVICE_AND_PART "0:1"
+#define FAT_ENV_FILE "uboot.env"
+#define CONFIG_FAT_WRITE
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_SYS_LOAD_ADDR 0x1000000
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_PREBOOT \
- "if load mmc 0:1 ${loadaddr} /uEnv.txt; then " \
- "env import -t -r ${loadaddr} ${filesize}; " \
- "fi"
/* Shell */
#define CONFIG_SYS_MAXARGS 8
@@ -138,7 +138,6 @@
/* Some things don't make sense on this HW or yet */
#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SAVEENV
/* Environment */
#define ENV_DEVICE_SETTINGS \
@@ -175,7 +174,6 @@
"pxefile_addr_r=0x00100000\0" \
"kernel_addr_r=0x01000000\0" \
"fdt_addr_r=0x02000000\0" \
- "fdtfile=bcm2835-rpi-b.dtb\0" \
"ramdisk_addr_r=0x02100000\0" \
#define BOOT_TARGET_DEVICES(func) \
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 5b77db2..d5588b1 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -230,7 +230,7 @@
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index dfbf3cb..f2849d7 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -276,7 +276,7 @@
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 0d5dba1..21e13e5 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -148,7 +148,7 @@
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index a160329..7d2c0d2 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -304,7 +304,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index 2fddef3..deb6bb2 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -178,7 +178,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index aeabb1b..87a4efc 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -144,7 +144,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index a8790c2..bc75172 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -233,7 +233,7 @@
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
/* FAT sd card locations. */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#ifdef CONFIG_SPL_OS_BOOT
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 6e7a7fb..36621a5 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -349,7 +349,7 @@
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier.h
similarity index 84%
rename from include/configs/uniphier-common.h
rename to include/configs/uniphier.h
index 2140fcc..dd022fb 100644
--- a/include/configs/uniphier-common.h
+++ b/include/configs/uniphier.h
@@ -10,10 +10,37 @@
#ifndef __CONFIG_UNIPHIER_COMMON_H__
#define __CONFIG_UNIPHIER_COMMON_H__
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) && \
- defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-# error "Both CONFIG_PFC_MICRO_SUPPORT_CARD and CONFIG_DCC_MICRO_SUPPORT_CARD \
-are defined. Select only one of them."
+#if defined(CONFIG_MACH_PH1_PRO4)
+#define CONFIG_DDR_NUM_CH0 2
+#define CONFIG_DDR_NUM_CH1 2
+
+/* Physical start address of SDRAM */
+#define CONFIG_SDRAM0_BASE 0x80000000
+#define CONFIG_SDRAM0_SIZE 0x20000000
+#define CONFIG_SDRAM1_BASE 0xa0000000
+#define CONFIG_SDRAM1_SIZE 0x20000000
+#endif
+
+#if defined(CONFIG_MACH_PH1_LD4)
+#define CONFIG_DDR_NUM_CH0 1
+#define CONFIG_DDR_NUM_CH1 1
+
+/* Physical start address of SDRAM */
+#define CONFIG_SDRAM0_BASE 0x80000000
+#define CONFIG_SDRAM0_SIZE 0x10000000
+#define CONFIG_SDRAM1_BASE 0x90000000
+#define CONFIG_SDRAM1_SIZE 0x10000000
+#endif
+
+#if defined(CONFIG_MACH_PH1_SLD8)
+#define CONFIG_DDR_NUM_CH0 1
+#define CONFIG_DDR_NUM_CH1 1
+
+/* Physical start address of SDRAM */
+#define CONFIG_SDRAM0_BASE 0x80000000
+#define CONFIG_SDRAM0_SIZE 0x10000000
+#define CONFIG_SDRAM1_BASE 0x90000000
+#define CONFIG_SDRAM1_SIZE 0x10000000
#endif
/*
@@ -40,6 +67,13 @@
#define CONFIG_SYS_NS16550_REG_SIZE -2
#endif
+/* TODO: move to Kconfig and device tree */
+#if 0
+#define CONFIG_SYS_NS16550_SERIAL
+#endif
+
+#define CONFIG_SMC911X
+
#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE
#define CONFIG_SMC911X_32_BIT
@@ -58,6 +92,7 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
@@ -87,17 +122,7 @@
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
-# define CONFIG_SYS_MAX_FLASH_BANKS 1
-# define CONFIG_SYS_FLASH_BANKS_LIST {0x00000000}
-# define CONFIG_SYS_FLASH_BANKS_SIZES {0x02000000}
-#endif
-
-#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-# define CONFIG_SYS_MAX_FLASH_BANKS 1
-# define CONFIG_SYS_FLASH_BANKS_LIST {0x04000000}
-# define CONFIG_SYS_FLASH_BANKS_SIZES {0x04000000}
-#endif
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2
/* serial console configuration */
#define CONFIG_BAUDRATE 115200
@@ -205,7 +230,6 @@
"image_offset=0x00080000\0" \
"image_size=0x00f00000\0" \
"verify=n\0" \
- "autostart=yes\0" \
"norboot=run add_default_bootargs;" \
"bootm $image_offset\0" \
"nandboot=run add_default_bootargs;" \
@@ -233,6 +257,13 @@
#define CONFIG_SYS_TEXT_BASE 0x84000000
+#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
+#define CONFIG_SPL_TEXT_BASE 0x00040000
+#endif
+#if defined(CONFIG_MACH_PH1_PRO4)
+#define CONFIG_SPL_TEXT_BASE 0x00100000
+#endif
+
#define CONFIG_BOARD_POSTCLK_INIT
#ifndef CONFIG_SPL_BUILD
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index c39c568..87b4fff 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -265,7 +265,7 @@
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 47b0889..b40133c 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -215,13 +215,11 @@
#define cond_resched() do { } while (0)
#define yield() do { } while (0)
-#define __user
#define __init
#define __exit
#define __devinit
#define __devinitdata
#define __devinitconst
-#define __iomem
#define kthread_create(...) __builtin_return_address(0)
#define kthread_stop(...) do { } while (0)
@@ -252,8 +250,6 @@
#define cdev_add(...) 0
#define cdev_del(...) do { } while (0)
-#define MAX_ERRNO 4095
-
#define prandom_u32(...) 0
typedef struct {
diff --git a/lib/Makefile b/lib/Makefile
index 320197a..3ceb697 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -11,14 +11,12 @@
obj-$(CONFIG_LZMA) += lzma/
obj-$(CONFIG_LZO) += lzo/
obj-$(CONFIG_ZLIB) += zlib/
+obj-$(CONFIG_BZIP2) += bzip2/
obj-$(CONFIG_TIZEN) += tizen/
+obj-$(CONFIG_OF_LIBFDT) += libfdt/
+obj-$(CONFIG_FIT) += libfdt/
obj-$(CONFIG_AES) += aes.o
-obj-$(CONFIG_BZIP2) += bzlib.o
-obj-$(CONFIG_BZIP2) += bzlib_crctable.o
-obj-$(CONFIG_BZIP2) += bzlib_decompress.o
-obj-$(CONFIG_BZIP2) += bzlib_randtable.o
-obj-$(CONFIG_BZIP2) += bzlib_huffman.o
obj-$(CONFIG_USB_TTY) += circbuf.o
obj-y += crc7.o
obj-y += crc8.o
diff --git a/lib/bzip2/Makefile b/lib/bzip2/Makefile
new file mode 100644
index 0000000..929c24e
--- /dev/null
+++ b/lib/bzip2/Makefile
@@ -0,0 +1,2 @@
+obj-y += bzlib.o bzlib_crctable.o bzlib_decompress.o \
+ bzlib_randtable.o bzlib_huffman.o
diff --git a/lib/bzlib.c b/lib/bzip2/bzlib.c
similarity index 100%
rename from lib/bzlib.c
rename to lib/bzip2/bzlib.c
diff --git a/lib/bzlib_crctable.c b/lib/bzip2/bzlib_crctable.c
similarity index 100%
rename from lib/bzlib_crctable.c
rename to lib/bzip2/bzlib_crctable.c
diff --git a/lib/bzlib_decompress.c b/lib/bzip2/bzlib_decompress.c
similarity index 100%
rename from lib/bzlib_decompress.c
rename to lib/bzip2/bzlib_decompress.c
diff --git a/lib/bzlib_huffman.c b/lib/bzip2/bzlib_huffman.c
similarity index 100%
rename from lib/bzlib_huffman.c
rename to lib/bzip2/bzlib_huffman.c
diff --git a/lib/bzlib_private.h b/lib/bzip2/bzlib_private.h
similarity index 100%
rename from lib/bzlib_private.h
rename to lib/bzip2/bzlib_private.h
diff --git a/lib/bzlib_randtable.c b/lib/bzip2/bzlib_randtable.c
similarity index 100%
rename from lib/bzlib_randtable.c
rename to lib/bzip2/bzlib_randtable.c
diff --git a/lib/libfdt/Makefile b/lib/libfdt/Makefile
index 6fe79e0..2f5413f 100644
--- a/lib/libfdt/Makefile
+++ b/lib/libfdt/Makefile
@@ -5,8 +5,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-COBJS-libfdt += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o \
+obj-y += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o \
fdt_empty_tree.o fdt_addresses.o
-
-obj-$(CONFIG_OF_LIBFDT) += $(COBJS-libfdt)
-obj-$(CONFIG_FIT) += $(COBJS-libfdt)
diff --git a/lib/zlib/zlib.h b/lib/zlib/zlib.h
index 556be32..af3703e 100644
--- a/lib/zlib/zlib.h
+++ b/lib/zlib/zlib.h
@@ -3,7 +3,7 @@
#define __GLUE_ZLIB_H__
#include <common.h>
-#include <compiler.h>
+#include <linux/compiler.h>
#include <asm/unaligned.h>
#include <watchdog.h>
#include "u-boot/zlib.h"
diff --git a/net/bootp.c b/net/bootp.c
index d4c86cf..8106601 100644
--- a/net/bootp.c
+++ b/net/bootp.c
@@ -145,8 +145,6 @@
if (tmp_ip != 0)
NetCopyIP(&NetServerIP, &bp->bp_siaddr);
memcpy(NetServerEther, ((struct ethernet_hdr *)NetRxPacket)->et_src, 6);
-#endif
- NetCopyIP(&NetOurIP, &bp->bp_yiaddr);
if (strlen(bp->bp_file) > 0)
copy_filename(BootFile, bp->bp_file, sizeof(BootFile));
@@ -158,6 +156,8 @@
*/
if (*BootFile)
setenv("bootfile", BootFile);
+#endif
+ NetCopyIP(&NetOurIP, &bp->bp_yiaddr);
}
static int truncate_sz(const char *name, int maxlen, int curlen)
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 1905446..ecf3037 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -34,6 +34,7 @@
endif
include $(srctree)/config.mk
+include $(srctree)/arch/$(ARCH)/Makefile
# Enable garbage collection of un-used sections for SPL
KBUILD_CFLAGS += -ffunction-sections -fdata-sections
@@ -45,21 +46,6 @@
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
-ifdef CONFIG_SPL_START_S_PATH
-START_PATH := $(CONFIG_SPL_START_S_PATH:"%"=%)
-else
-START_PATH := $(CPUDIR)
-endif
-
-head-y := $(START_PATH)/start.o
-head-$(CONFIG_X86) += $(START_PATH)/start16.o $(START_PATH)/resetvec.o
-head-$(CONFIG_4xx) += $(START_PATH)/resetvec.o
-head-$(CONFIG_MPC85xx) += $(START_PATH)/resetvec.o
-
-libs-y += arch/$(ARCH)/lib/
-
-libs-y += $(CPUDIR)/
-
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
@@ -94,13 +80,6 @@
libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/
libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/
-ifneq (,$(CONFIG_MX23)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
-libs-y += arch/$(ARCH)/imx-common/
-endif
-
-libs-$(CONFIG_ARM) += arch/arm/cpu/
-libs-$(CONFIG_PPC) += arch/powerpc/cpu/
-
head-y := $(addprefix $(obj)/,$(head-y))
libs-y := $(addprefix $(obj)/,$(libs-y))
u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y)))
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 7717d68..368a20e 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -835,8 +835,7 @@
if ($lk_path ne "" && substr($lk_path,length($lk_path)-1,1) ne "/") {
$lk_path .= "/";
}
- if ( (-f "${lk_path}CREDITS")
- && (-f "${lk_path}Kbuild")
+ if ( (-f "${lk_path}Kbuild")
&& (-f "${lk_path}MAINTAINERS")
&& (-f "${lk_path}Makefile")
&& (-f "${lk_path}README")
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index a26cc5d..72c9dba 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -548,7 +548,7 @@
{
int i, j;
struct menu *submenu[8], *menu, *location = NULL;
- struct jump_key *jump;
+ struct jump_key *jump = NULL;
str_printf(r, _("Prompt: %s\n"), _(prop->text));
menu = prop->menu->parent;
@@ -586,7 +586,7 @@
str_printf(r, _(" Location:\n"));
for (j = 4; --i >= 0; j += 2) {
menu = submenu[i];
- if (head && location && menu == location)
+ if (jump && menu == location)
jump->offset = strlen(r->s);
str_printf(r, "%*c-> %s", j, ' ',
_(menu_get_prompt(menu)));