* Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index 3eb5895..fbb4a7d 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -27,7 +27,6 @@
#include <common.h>
#include <command.h>
-#include <cmd_immap.h>
#if (CONFIG_COMMANDS & CFG_CMD_IMMAP) && \
(defined(CONFIG_8xx) || defined(CONFIG_8260))
@@ -592,4 +591,112 @@
unimplemented (cmdtp, flag, argc, argv);
return 0;
}
+
+/***************************************************/
+
+cmd_tbl_t U_BOOT_CMD(SIUINFO) = MK_CMD_ENTRY(
+ "siuinfo", 1, 1, do_siuinfo,
+ "siuinfo - print System Interface Unit (SIU) registers\n",
+ NULL
+);
+
+cmd_tbl_t U_BOOT_CMD(MEMCINFO) = MK_CMD_ENTRY(
+ "memcinfo", 1, 1, do_memcinfo,
+ "memcinfo- print Memory Controller registers\n",
+ NULL
+);
+
+cmd_tbl_t U_BOOT_CMD(SITINFO) = MK_CMD_ENTRY(
+ "sitinfo", 1, 1, do_sitinfo,
+ "sitinfo - print System Integration Timers (SIT) registers\n",
+ NULL
+);
+
+#ifdef CONFIG_8260
+cmd_tbl_t U_BOOT_CMD(ICINFO) = MK_CMD_ENTRY(
+ "icinfo", 1, 1, do_icinfo,
+ "icinfo - print Interrupt Controller registers\n",
+ NULL
+);
+#endif
+
+cmd_tbl_t U_BOOT_CMD(CARINFO) = MK_CMD_ENTRY(
+ "carinfo", 1, 1, do_carinfo,
+ "carinfo - print Clocks and Reset registers\n",
+ NULL
+);
+
+cmd_tbl_t U_BOOT_CMD(IOPINFO) = MK_CMD_ENTRY(
+ "iopinfo", 1, 1, do_iopinfo,
+ "iopinfo - print I/O Port registers\n",
+ NULL
+);
+
+cmd_tbl_t U_BOOT_CMD(IOPSET) = MK_CMD_ENTRY(
+ "iopset", 5, 0, do_iopset,
+ "iopset - set I/O Port registers\n",
+ "PORT PIN CMD VALUE\nPORT: A-D, PIN: 0-31, CMD: [dat|dir|odr|sor], VALUE: 0|1"
+);
+
+cmd_tbl_t U_BOOT_CMD(DMAINFO) = MK_CMD_ENTRY(
+ "dmainfo", 1, 1, do_dmainfo,
+ "dmainfo - print SDMA/IDMA registers\n",
+ NULL
+);
+
+cmd_tbl_t U_BOOT_CMD(FCCINFO) = MK_CMD_ENTRY(
+ "fccinfo", 1, 1, do_fccinfo,
+ "fccinfo - print FCC registers\n",
+ NULL
+);
+
+cmd_tbl_t U_BOOT_CMD(BRGINFO) = MK_CMD_ENTRY(
+ "brginfo", 1, 1, do_brginfo,
+ "brginfo - print Baud Rate Generator (BRG) registers\n",
+ NULL
+);
+
+cmd_tbl_t U_BOOT_CMD(I2CINFO) = MK_CMD_ENTRY(
+ "i2cinfo", 1, 1, do_i2cinfo,
+ "i2cinfo - print I2C registers\n",
+ NULL
+);
+
+cmd_tbl_t U_BOOT_CMD(SCCINFO) = MK_CMD_ENTRY(
+ "sccinfo", 1, 1, do_sccinfo,
+ "sccinfo - print SCC registers\n",
+ NULL
+);
+
+cmd_tbl_t U_BOOT_CMD(SMCINFO) = MK_CMD_ENTRY(
+ "smcinfo", 1, 1, do_smcinfo,
+ "smcinfo - print SMC registers\n",
+ NULL
+);
+
+cmd_tbl_t U_BOOT_CMD(SPIINFO) = MK_CMD_ENTRY(
+ "spiinfo", 1, 1, do_spiinfo,
+ "spiinfo - print Serial Peripheral Interface (SPI) registers\n",
+ NULL
+);
+
+cmd_tbl_t U_BOOT_CMD(MUXINFO) = MK_CMD_ENTRY(
+ "muxinfo", 1, 1, do_muxinfo,
+ "muxinfo - print CPM Multiplexing registers\n",
+ NULL
+);
+
+cmd_tbl_t U_BOOT_CMD(SIINFO) = MK_CMD_ENTRY(
+ "siinfo", 1, 1, do_siinfo,
+ "siinfo - print Serial Interface (SI) registers\n",
+ NULL
+);
+
+cmd_tbl_t U_BOOT_CMD(MCCINFO) = MK_CMD_ENTRY(
+ "mccinfo", 1, 1, do_mccinfo,
+ "mccinfo - print MCC registers\n",
+ NULL
+);
+
+
#endif /* CFG_CMD_IMMAP && (CONFIG_8xx || CONFIG_8260) */