* Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
diff --git a/lib_i386/pci.c b/lib_i386/pci.c
index acd1d25..a7f16aa 100644
--- a/lib_i386/pci.c
+++ b/lib_i386/pci.c
@@ -21,24 +21,24 @@
* MA 02111-1307 USA
*/
-#include <common.h>
-#include <pci.h>
-#include <asm/io.h>
-#include <asm/pci.h>
+#include <common.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/pci.h>
#ifdef CONFIG_PCI
#undef PCI_ROM_SCAN_VERBOSE
-int pci_shadow_rom(pci_dev_t dev, unsigned char *dest)
+int pci_shadow_rom(pci_dev_t dev, unsigned char *dest)
{
struct pci_controller *hose;
int res = -1;
int i;
-
+
u32 rom_addr;
u32 addr_reg;
u32 size;
-
+
u16 vendor;
u16 device;
u32 class_code;
@@ -47,18 +47,18 @@
#if 0
printf("pci_shadow_rom() asked to shadow device %x to %x\n",
dev, (u32)dest);
-#endif
+#endif
pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
pci_read_config_word(dev, PCI_DEVICE_ID, &device);
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_code);
-
+
class_code &= 0xffffff00;
class_code >>= 8;
-#if 0
+#if 0
printf("PCI Header Vendor %04x device %04x class %06x\n",
vendor, device, class_code);
-#endif
+#endif
/* Enable the rom addess decoder */
pci_write_config_dword(dev, PCI_ROM_ADDRESS, PCI_ROM_ADDRESS_MASK);
pci_read_config_dword(dev, PCI_ROM_ADDRESS, &addr_reg);
@@ -68,40 +68,39 @@
printf("pci_chadow_rom: device do not seem to have a rom\n");
return -1;
}
-
- size = (~(addr_reg&PCI_ROM_ADDRESS_MASK))+1;
-
-#if 0
+
+ size = (~(addr_reg&PCI_ROM_ADDRESS_MASK))+1;
+
+#if 0
printf("ROM is %d bytes\n", size);
-#endif
+#endif
rom_addr = pci_get_rom_window(hose, size);
-#if 0
+#if 0
printf("ROM mapped at %x \n", rom_addr);
-#endif
- pci_write_config_dword(dev, PCI_ROM_ADDRESS,
+#endif
+ pci_write_config_dword(dev, PCI_ROM_ADDRESS,
pci_phys_to_mem(dev, rom_addr)
|PCI_ROM_ADDRESS_ENABLE);
-
for (i=rom_addr;i<rom_addr+size; i+=512) {
-
-
+
+
if (readw(i) == 0xaa55) {
u32 pci_data;
#ifdef PCI_ROM_SCAN_VERBOSE
printf("ROM signature found\n");
-#endif
+#endif
pci_data = readw(0x18+i);
pci_data += i;
-
+
if (0==memcmp((void*)pci_data, "PCIR", 4)) {
-#ifdef PCI_ROM_SCAN_VERBOSE
+#ifdef PCI_ROM_SCAN_VERBOSE
printf("Fount PCI rom image at offset %d\n", i-rom_addr);
printf("Vendor %04x device %04x class %06x\n",
readw(pci_data+4), readw(pci_data+6),
readl(pci_data+0x0d)&0xffffff);
- printf("%s\n",
+ printf("%s\n",
(readw(pci_data+0x15) &0x80)?
"Last image":"More images follow");
switch (readb(pci_data+0x14)) {
@@ -116,38 +115,38 @@
break;
}
printf("Image size %d\n", readw(pci_data+0x10) * 512);
-#endif
+#endif
/* FixMe: I think we should compare the class code
* bytes as well but I have no reference on the
* exact order of these bytes in the PCI ROM header */
- if (readw(pci_data+4) == vendor &&
+ if (readw(pci_data+4) == vendor &&
readw(pci_data+6) == device &&
/* (readl(pci_data+0x0d)&0xffffff) == class_code && */
readb(pci_data+0x14) == 0 /* x86 code image */ ) {
-#ifdef PCI_ROM_SCAN_VERBOSE
+#ifdef PCI_ROM_SCAN_VERBOSE
printf("Suitable ROM image found, copying\n");
-#endif
+#endif
memmove(dest, (void*)rom_addr, readw(pci_data+0x10) * 512);
res = 0;
break;
-
+
}
if (readw(pci_data+0x15) &0x80) {
break;
}
}
}
-
+
}
-
+
#ifdef PCI_ROM_SCAN_VERBOSE
if (res) {
printf("No suitable image found\n");
}
-#endif
+#endif
/* disable PAR register and PCI device ROM address devocer */
pci_remove_rom_window(hose, rom_addr);
-
+
pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
return res;