* Patches by Stephan Linz, 3 Nov 2003:
- more endianess fixes for LAN91C111 driver
- CFG_HZ configuration patch for NIOS Cyclone board
* Patch by Stephan Linz, 28 Oct 2003:
fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
* Patch by Steven Scholz, 20 Oct 2003:
- make "mii info <addr>" show infor for PHY at "addr" only
- Endian fix for miiphy_info()
diff --git a/CHANGELOG b/CHANGELOG
index 974ce57..f8129e4 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,17 @@
Changes since U-Boot 1.0.0:
======================================================================
+* Patches by Stephan Linz, 3 Nov 2003:
+ - more endianess fixes for LAN91C111 driver
+ - CFG_HZ configuration patch for NIOS Cyclone board
+
+* Patch by Stephan Linz, 28 Oct 2003:
+ fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
+
+* Patch by Steven Scholz, 20 Oct 2003:
+ - make "mii info <addr>" show infor for PHY at "addr" only
+ - Endian fix for miiphy_info()
+
* Patch by Gleb Natapov, 19 Sep 2003:
Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index 18fad1e..94874dd 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -81,7 +81,7 @@
* check info/read/write.
*/
if (op == 'i') {
- int j;
+ unsigned char j, start, end;
unsigned int oui;
unsigned char model;
unsigned char rev;
@@ -89,7 +89,13 @@
/*
* Look for any and all PHYs. Valid addresses are 0..31.
*/
- for (j = 0; j < 32; j++) {
+ if (argc >= 3) {
+ start = addr; end = addr + 1;
+ } else {
+ start = 0; end = 32;
+ }
+
+ for (j = start; j < end; j++) {
if (miiphy_info (j, &oui, &model, &rev) == 0) {
printf ("PHY 0x%02X: "
"OUI = 0x%04X, "
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index 75c2df5..af8c7c7 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -47,19 +47,15 @@
unsigned char *model, unsigned char *rev)
{
unsigned int reg = 0;
+ unsigned short tmp;
- /*
- * Trick: we are reading two 16 registers into a 32 bit variable
- * so we do a 16 read into the high order bits of the variable (big
- * endian, you know), shift it down 16 bits, and the read the rest.
- */
- if (miiphy_read (addr, PHY_PHYIDR2, (unsigned short *) ®) != 0) {
+ if (miiphy_read (addr, PHY_PHYIDR2, &tmp) != 0) {
#ifdef DEBUG
printf ("PHY ID register 2 read failed\n");
#endif
return (-1);
}
- reg >>= 16;
+ reg = tmp;
#ifdef DEBUG
printf ("PHY_PHYIDR2 @ 0x%x = 0x%04x\n", addr, reg);
@@ -69,12 +65,13 @@
return (-1);
}
- if (miiphy_read (addr, PHY_PHYIDR1, (unsigned short *) ®) != 0) {
+ if (miiphy_read (addr, PHY_PHYIDR1, &tmp) != 0) {
#ifdef DEBUG
printf ("PHY ID register 1 read failed\n");
#endif
return (-1);
}
+ reg |= tmp << 16;
#ifdef DEBUG
printf ("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
#endif
diff --git a/drivers/smc91111.c b/drivers/smc91111.c
index 3146ff4..6c3a0b7 100644
--- a/drivers/smc91111.c
+++ b/drivers/smc91111.c
@@ -71,10 +71,12 @@
#define NO_AUTOPROBE
+#define SMC_DEBUG 0
+
+#if SMC_DEBUG > 1
static const char version[] =
"smc91111.c:v1.0 04/25/01 by Daris A Nevil (dnevil@snmc.com)\n";
-
-#define SMC_DEBUG 0
+#endif
/*------------------------------------------------------------------------
.
@@ -212,7 +214,7 @@
------------------------------------------------------------
*/
-static char smc_mac_addr[] = {0x02, 0x80, 0xad, 0x20, 0x31, 0xb8};
+static char unsigned smc_mac_addr[6] = {0x02, 0x80, 0xad, 0x20, 0x31, 0xb8};
/*
* This function must be called before smc_open() if you want to override
@@ -623,7 +625,7 @@
return 0;
} else {
/* ack. int */
- SMC_outw (IM_TX_INT, SMC91111_INT_REG);
+ SMC_outb (IM_TX_INT, SMC91111_INT_REG);
PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME,
length);
@@ -729,7 +731,6 @@
dword stat_len;
#endif
-
SMC_SELECT_BANK(2);
packet_number = SMC_inw( RXFIFO_REG );
@@ -1223,7 +1224,7 @@
/* Enable PHY Interrupts (for register 18) */
/* Interrupts listed here are disabled */
- smc_write_phy_register (PHY_INT_REG, 0xffff);
+ smc_write_phy_register (PHY_MASK_REG, 0xffff);
/* Configure the Receive/Phy Control register */
SMC_SELECT_BANK (0);
diff --git a/drivers/smc91111.h b/drivers/smc91111.h
index fc694ac..1e458a4 100644
--- a/drivers/smc91111.h
+++ b/drivers/smc91111.h
@@ -306,7 +306,17 @@
#define RPC_LED_100 (0x05) /* LED = 100Mbps link dectect */
#define RPC_LED_TX (0x06) /* LED = TX packet occurred */
#define RPC_LED_RX (0x07) /* LED = RX packet occurred */
-#define RPC_DEFAULT (RPC_ANEG | (RPC_LED_100 << RPC_LSXA_SHFT) | (RPC_LED_FD << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX)
+#if defined(CONFIG_DK1C20)
+/* buggy schematic: LEDa -> yellow, LEDb --> green */
+#define RPC_DEFAULT ( RPC_SPEED | RPC_DPLX | RPC_ANEG \
+ | (RPC_LED_TX_RX << RPC_LSXA_SHFT) \
+ | (RPC_LED_100_10 << RPC_LSXB_SHFT) )
+#else
+/* SMSC reference design: LEDa --> green, LEDb --> yellow */
+#define RPC_DEFAULT ( RPC_SPEED | RPC_DPLX | RPC_ANEG \
+ | (RPC_LED_100_10 << RPC_LSXA_SHFT) \
+ | (RPC_LED_TX_RX << RPC_LSXB_SHFT) )
+#endif
/* Bank 0 0x000C is reserved */
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
index 938e83a..87ba760 100644
--- a/include/configs/DK1C20.h
+++ b/include/configs/DK1C20.h
@@ -158,7 +158,7 @@
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#undef CFG_CLKS_IN_HZ
-#define CFG_HZ 1562500
+#define CFG_HZ 1000 /* decr freq: 1ms ticks */
#define CFG_LOAD_ADDR 0x00800000 /* Default load address */
#define CFG_MEMTEST_START 0x00000000