dm: dts: Convert driver model tags to use new schema
Now that Linux has accepted these tags, move the device tree files in
U-Boot over to use them.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/dts/at91-sama5d4_xplained.dts b/arch/arm/dts/at91-sama5d4_xplained.dts
index 7495925..95f2091 100644
--- a/arch/arm/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/dts/at91-sama5d4_xplained.dts
@@ -54,7 +54,7 @@
};
chosen {
- u-boot,dm-pre-reloc;
+ bootph-all;
stdout-path = &usart3;
};
@@ -92,10 +92,10 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888>;
status = "okay";
- u-boot,dm-pre-reloc;
+ bootph-all;
display-timings {
- u-boot,dm-pre-reloc;
+ bootph-all;
480x272 {
clock-frequency = <9000000>;
hactive = <480>;
@@ -106,17 +106,17 @@
vfront-porch = <2>;
vback-porch = <2>;
vsync-len = <11>;
- u-boot,dm-pre-reloc;
+ bootph-all;
};
};
};
spi0: spi@f8010000 {
- u-boot,dm-pre-reloc;
+ bootph-all;
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
status = "okay";
spi_flash@0 {
- u-boot,dm-pre-reloc;
+ bootph-all;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
@@ -146,7 +146,7 @@
};
mmc1: mmc@fc000000 {
- u-boot,dm-pre-reloc;
+ bootph-all;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
vmmc-supply = <&vcc_mmc1_reg>;
@@ -160,7 +160,7 @@
};
usart3: serial@fc00c000 {
- u-boot,dm-pre-reloc;
+ bootph-all;
status = "okay";
};
@@ -193,9 +193,9 @@
pinctrl@fc06a000 {
board {
- u-boot,dm-pre-reloc;
+ bootph-all;
pinctrl_mmc1_cd: mmc1_cd {
- u-boot,dm-pre-reloc;
+ bootph-all;
atmel,pins =
<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};