dm: dts: Convert driver model tags to use new schema
Now that Linux has accepted these tags, move the device tree files in
U-Boot over to use them.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/dts/at91sam9rl.dtsi b/arch/arm/dts/at91sam9rl.dtsi
index 6d6aee5..b855c8f 100644
--- a/arch/arm/dts/at91sam9rl.dtsi
+++ b/arch/arm/dts/at91sam9rl.dtsi
@@ -78,7 +78,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
- u-boot,dm-pre-reloc;
+ bootph-all;
fb0: fb@00500000 {
compatible = "atmel,at91sam9rl-lcdc";
@@ -113,7 +113,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
- u-boot,dm-pre-reloc;
+ bootph-all;
tcb0: timer@fffa0000 {
compatible = "atmel,at91rm9200-tcb";
@@ -398,7 +398,7 @@
<0xffffffff 0x0000c780>, /* pioB */
<0xffffffff 0xe3ffff0e>, /* pioC */
<0x003fffff 0x0001ff3c>; /* pioD */
- u-boot,dm-pre-reloc;
+ bootph-all;
/* shared pinctrl settings */
adc0 {
@@ -440,7 +440,7 @@
};
dbgu {
- u-boot,dm-pre-reloc;
+ bootph-all;
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
@@ -779,7 +779,7 @@
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioA_clk>;
- u-boot,dm-pre-reloc;
+ bootph-all;
};
pioB: gpio@fffff600 {
@@ -791,7 +791,7 @@
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioB_clk>;
- u-boot,dm-pre-reloc;
+ bootph-all;
};
pioC: gpio@fffff800 {
@@ -803,7 +803,7 @@
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioC_clk>;
- u-boot,dm-pre-reloc;
+ bootph-all;
};
pioD: gpio@fffffa00 {
@@ -815,7 +815,7 @@
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioD_clk>;
- u-boot,dm-pre-reloc;
+ bootph-all;
};
pmc: pmc@fffffc00 {
@@ -826,7 +826,7 @@
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
- u-boot,dm-pre-reloc;
+ bootph-all;
main: mainck {
compatible = "atmel,at91rm9200-clk-main";
@@ -862,7 +862,7 @@
clocks = <&clk32k>, <&main>, <&plla>, <&utmi>;
atmel,clk-output-range = <0 94000000>;
atmel,clk-divisors = <1 2 4 0>;
- u-boot,dm-pre-reloc;
+ bootph-all;
};
prog: progck {
@@ -909,30 +909,30 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mck>;
- u-boot,dm-pre-reloc;
+ bootph-all;
pioA_clk: pioA_clk@2 {
#clock-cells = <0>;
reg = <2>;
- u-boot,dm-pre-reloc;
+ bootph-all;
};
pioB_clk: pioB_clk@3 {
#clock-cells = <0>;
reg = <3>;
- u-boot,dm-pre-reloc;
+ bootph-all;
};
pioC_clk: pioC_clk@4 {
#clock-cells = <0>;
reg = <4>;
- u-boot,dm-pre-reloc;
+ bootph-all;
};
pioD_clk: pioD_clk@5 {
#clock-cells = <0>;
reg = <5>;
- u-boot,dm-pre-reloc;
+ bootph-all;
};
usart0_clk: usart0_clk@6 {