fsl: Clean up printing of PCI boot info
Previously boards used a variety of indentations, newline styles, and
colon styles for the PCI information that is printed on bootup. This
patch unifies the style to look like:
...
NAND: 1024 MiB
PCIE1: connected as Root Complex
Scanning PCI bus 01
04 01 8086 1010 0200 00
04 01 8086 1010 0200 00
03 00 10b5 8112 0604 00
02 01 10b5 8518 0604 00
02 02 10b5 8518 0604 00
08 00 1957 0040 0b20 00
07 00 10b5 8518 0604 00
09 00 10b5 8112 0604 00
07 01 10b5 8518 0604 00
07 02 10b5 8518 0604 00
06 00 10b5 8518 0604 00
02 03 10b5 8518 0604 00
01 00 10b5 8518 0604 00
PCIE1: Bus 00 - 0b
PCIE2: connected as Root Complex
Scanning PCI bus 0d
0d 00 1957 0040 0b20 00
PCIE2: Bus 0c - 0d
In: serial
...
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
CC: wd@denx.de
CC: sr@denx.de
CC: galak@kernel.crashing.org
diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c
index 671f9e9..4fcbb18 100644
--- a/board/atum8548/atum8548.c
+++ b/board/atum8548/atum8548.c
@@ -218,14 +218,14 @@
pcie1_hose.region_count = 1;
#endif
- printf (" PCIE1 connected to Slot as %s (base addr %lx)\n",
+ printf ("PCIE1: connected to Slot as %s (base addr %lx)\n",
pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf (" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
puts("\n");
@@ -242,7 +242,7 @@
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
SET_STD_PCI_INFO(pci_info[num], 1);
pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
- printf ("\n PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+ printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333000) ? "33" :
(pci_speed == 66666000) ? "66" : "unknown",
@@ -254,7 +254,7 @@
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pci1_hose, first_free_busno);
} else {
- printf (" PCI: disabled\n");
+ printf("PCI1: disabled\n");
}
puts("\n");
@@ -267,11 +267,11 @@
SET_STD_PCI_INFO(pci_info[num], 2);
pci_agent = fsl_setup_hose(&pci2_hose, pci_info[num].regs);
- puts (" PCI2\n");
+ puts("PCI2\n");
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pci1_hose, first_free_busno);
} else {
- printf (" PCI2: disabled\n");
+ printf("PCI2: disabled\n");
}
puts("\n");
#else
diff --git a/board/freescale/corenet_ds/pci.c b/board/freescale/corenet_ds/pci.c
index e1bca19..775b623 100644
--- a/board/freescale/corenet_ds/pci.c
+++ b/board/freescale/corenet_ds/pci.c
@@ -68,13 +68,13 @@
LAW_TRGT_IF_PCIE_1);
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf(" PCIE1 connected to Slot 1 as %s (base addr %lx)\n",
+ printf("PCIE1: connected to Slot 1 as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf (" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
#else
setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE1); /* disable */
@@ -90,13 +90,13 @@
LAW_TRGT_IF_PCIE_2);
SET_STD_PCIE_INFO(pci_info[num], 2);
pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
- printf(" PCIE2 connected to Slot 3 as %s (base addr %lx)\n",
+ printf("PCIE2: connected to Slot 3 as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
} else {
- printf (" PCIE2: disabled\n");
+ printf("PCIE2: disabled\n");
}
#else
setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE2); /* disable */
@@ -112,13 +112,13 @@
LAW_TRGT_IF_PCIE_3);
SET_STD_PCIE_INFO(pci_info[num], 3);
pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
- printf(" PCIE3 connected to Slot 2 as %s (base addr %lx)\n",
+ printf("PCIE3: connected to Slot 2 as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie3_hose, first_free_busno);
} else {
- printf (" PCIE3: disabled\n");
+ printf("PCIE3: disabled\n");
}
#else
setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE3); /* disable */
@@ -134,13 +134,13 @@
LAW_TRGT_IF_PCIE_4);
SET_STD_PCIE_INFO(pci_info[num], 4);
pcie_ep = fsl_setup_hose(&pcie4_hose, pci_info[num].regs);
- printf(" PCIE4 connected to as %s (base addr %lx)\n",
+ printf("PCIE4: connected to as %s (base addr %lx)\n",
pcie_ep ? "End Point" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie4_hose, first_free_busno);
} else {
- printf (" PCIE4: disabled\n");
+ printf("PCIE4: disabled\n");
}
#else
setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE4); /* disable */
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index c8e0856..8ad7549 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -229,13 +229,13 @@
LAW_TRGT_IF_PCIE_3);
SET_STD_PCIE_INFO(pci_info[num], 3);
pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
- printf (" PCIE3 connected to Slot3 as %s (base address %lx)\n",
+ printf("PCIE3: connected to Slot3 as %s (base address %lx)\n",
pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie3_hose, first_free_busno);
} else {
- printf (" PCIE3: disabled\n");
+ printf("PCIE3: disabled\n");
}
puts("\n");
@@ -253,13 +253,13 @@
LAW_TRGT_IF_PCIE_1);
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf (" PCIE1 connected to Slot1 as %s (base address %lx)\n",
+ printf("PCIE1: connected to Slot1 as %s (base address %lx)\n",
pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf (" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
puts("\n");
@@ -277,13 +277,13 @@
LAW_TRGT_IF_PCIE_2);
SET_STD_PCIE_INFO(pci_info[num], 2);
pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
- printf (" PCIE2 connected to Slot 2 as %s (base address %lx)\n",
+ printf("PCIE2: connected to Slot 2 as %s (base address %lx)\n",
pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
} else {
- printf (" PCIE2: disabled\n");
+ printf("PCIE2: disabled\n");
}
puts("\n");
@@ -304,7 +304,7 @@
LAW_TRGT_IF_PCI);
SET_STD_PCI_INFO(pci_info[num], 1);
pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
- printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+ printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333000) ? "33" :
(pci_speed == 66666000) ? "66" : "unknown",
@@ -316,7 +316,7 @@
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pci1_hose, first_free_busno);
} else {
- printf (" PCI: disabled\n");
+ printf("PCI: disabled\n");
}
puts("\n");
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index f9ff827..d354a26 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -47,10 +47,10 @@
puts("Board: ADS\n");
#ifdef CONFIG_PCI
- printf(" PCI1: 32 bit, %d MHz (compiled)\n",
+ printf("PCI1: 32 bit, %d MHz (compiled)\n",
CONFIG_SYS_CLK_FREQ / 1000000);
#else
- printf(" PCI1: disabled\n");
+ printf("PCI1: disabled\n");
#endif
/*
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 0580fe7..59ec604 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -221,17 +221,17 @@
MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
- printf (" PCI1: %d bit, %s MHz, %s\n",
+ printf("PCI1: %d bit, %s MHz, %s\n",
(pci1_32) ? 32 : 64,
(pci1_speed == 33000000) ? "33" :
(pci1_speed == 66000000) ? "66" : "unknown",
pci1_clk_sel ? "sync" : "async");
if (pci_dual) {
- printf (" PCI2: 32 bit, 66 MHz, %s\n",
+ printf("PCI2: 32 bit, 66 MHz, %s\n",
pci2_clk_sel ? "sync" : "async");
} else {
- printf (" PCI2: disabled\n");
+ printf("PCI2: disabled\n");
}
/*
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index da3a2b6..3bbf0c2 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -142,9 +142,9 @@
pcie3_hose.region_count = 1;
#endif
- printf (" PCIE3 connected to ULI as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE3: connected to ULI as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie3_hose, first_free_busno);
@@ -154,7 +154,7 @@
*/
in_be32((u32 *)CONFIG_SYS_PCIE3_MEM_BUS);
} else {
- printf (" PCIE3: disabled\n");
+ printf("PCIE3: disabled\n");
}
puts("\n");
#else
@@ -177,14 +177,14 @@
pcie1_hose.region_count = 1;
#endif
- printf (" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
+ printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf (" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
puts("\n");
@@ -208,13 +208,13 @@
pcie2_hose.region_count = 1;
#endif
- printf (" PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
} else {
- printf (" PCIE2: disabled\n");
+ printf("PCIE2: disabled\n");
}
puts("\n");
@@ -231,7 +231,7 @@
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
SET_STD_PCI_INFO(pci_info[num], 1);
pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
- printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+ printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333000) ? "33" :
(pci_speed == 66666000) ? "66" : "unknown",
@@ -243,7 +243,7 @@
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pci1_hose, first_free_busno);
} else {
- printf (" PCI: disabled\n");
+ printf("PCI: disabled\n");
}
puts("\n");
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index 23e552b..14c902c 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -284,7 +284,7 @@
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
SET_STD_PCI_INFO(pci_info[num], 1);
pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
- printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+ printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333000) ? "33" :
(pci_speed == 66666000) ? "66" : "unknown",
@@ -308,7 +308,7 @@
}
#endif
} else {
- printf (" PCI: disabled\n");
+ printf("PCI: disabled\n");
}
puts("\n");
@@ -321,10 +321,10 @@
uint pci2_clk_sel = porpllsr & 0x4000; /* PORPLLSR[17] */
uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */
if (pci_dual) {
- printf (" PCI2: 32 bit, 66 MHz, %s\n",
+ printf("PCI2: 32 bit, 66 MHz, %s\n",
pci2_clk_sel ? "sync" : "async");
} else {
- printf (" PCI2: disabled\n");
+ printf("PCI2: disabled\n");
}
}
#else
@@ -337,14 +337,14 @@
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf (" PCIE1 connected to Slot as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE1: connected to Slot as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf (" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
puts("\n");
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index b7e0e0c..edaba26 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -219,17 +219,17 @@
MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
- printf (" PCI1: %d bit, %s MHz, %s\n",
+ printf("PCI1: %d bit, %s MHz, %s\n",
(pci1_32) ? 32 : 64,
(pci1_speed == 33000000) ? "33" :
(pci1_speed == 66000000) ? "66" : "unknown",
pci1_clk_sel ? "sync" : "async");
if (pci_dual) {
- printf (" PCI2: 32 bit, 66 MHz, %s\n",
+ printf("PCI2: 32 bit, 66 MHz, %s\n",
pci2_clk_sel ? "sync" : "async");
} else {
- printf (" PCI2: disabled\n");
+ printf("PCI2: disabled\n");
}
/*
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 423e9d7..1761431 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -252,10 +252,10 @@
puts("Board: ADS\n");
#ifdef CONFIG_PCI
- printf(" PCI1: 32 bit, %d MHz (compiled)\n",
+ printf("PCI1: 32 bit, %d MHz (compiled)\n",
CONFIG_SYS_CLK_FREQ / 1000000);
#else
- printf(" PCI1: disabled\n");
+ printf("PCI1: disabled\n");
#endif
/*
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index bd859e4..d74fcac 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -378,7 +378,7 @@
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
SET_STD_PCI_INFO(pci_info[num], 1);
pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
- printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+ printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333000) ? "33" :
(pci_speed == 66666000) ? "66" : "unknown",
@@ -390,7 +390,7 @@
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pci1_hose, first_free_busno);
} else {
- printf (" PCI: disabled\n");
+ printf("PCI: disabled\n");
}
puts("\n");
@@ -404,14 +404,14 @@
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf (" PCIE1 connected to Slot as %s (base addr %lx)\n",
+ printf("PCIE1: connected to Slot as %s (base addr %lx)\n",
pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf (" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
puts("\n");
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 743e712..dc0884e 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -584,13 +584,13 @@
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf (" PCIE1 connected to Slot as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE1: connected to Slot as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf (" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
puts("\n");
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index 6b96dfc..2125274 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -192,9 +192,9 @@
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
SET_STD_PCIE_INFO(pci_info[num], 3);
pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
- printf (" PCIE3 connected to ULI as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE3: connected to ULI as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie3_hose, first_free_busno);
/*
@@ -211,7 +211,7 @@
in_be32(p);
}
} else {
- printf (" PCIE3: disabled\n");
+ printf("PCIE3: disabled\n");
}
puts("\n");
#else
@@ -224,13 +224,13 @@
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
SET_STD_PCIE_INFO(pci_info[num], 2);
pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
- printf (" PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
} else {
- printf (" PCIE2: disabled\n");
+ printf("PCIE2: disabled\n");
}
puts("\n");
@@ -244,13 +244,13 @@
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf (" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
+ printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf (" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
puts("\n");
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
index f67f3e3..61a635d 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -244,14 +244,14 @@
if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)){
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf (" PCIE1 connected to ULI as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE1: connected to ULI as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf (" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
puts("\n");
@@ -265,13 +265,13 @@
if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)){
SET_STD_PCIE_INFO(pci_info[num], 2);
pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
- printf (" PCIE2 connected to Slot as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE2: connected to Slot as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
} else {
- printf (" PCIE2: disabled\n");
+ printf("PCIE2: disabled\n");
}
puts("\n");
@@ -283,14 +283,14 @@
if (!(devdisr & MPC86xx_DEVDISR_PCI1)) {
SET_STD_PCI_INFO(pci_info[num], 1);
pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
- printf(" PCI connected to PCI slots as %s" \
+ printf("PCI: connected to PCI slots as %s" \
" (base address %lx)\n",
pci_agent ? "Agent" : "Host",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pci1_hose, first_free_busno);
} else {
- printf (" PCI: disabled\n");
+ printf("PCI: disabled\n");
}
puts("\n");
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 092ead6..812111d 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -157,9 +157,9 @@
if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf(" PCIE1 connected to ULI as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE1: connected to ULI as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
@@ -171,22 +171,22 @@
+ CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000)));
} else {
- puts(" PCIE1: disabled\n");
+ puts("PCIE1: disabled\n");
}
#else
- puts(" PCIE1: disabled\n");
+ puts("PCIE1: disabled\n");
#endif /* CONFIG_PCIE1 */
#ifdef CONFIG_PCIE2
SET_STD_PCIE_INFO(pci_info[num], 2);
pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
- printf(" PCIE2 connected as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE2: connected as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
#else
- puts(" PCIE2: disabled\n");
+ puts("PCIE2: disabled\n");
#endif /* CONFIG_PCIE2 */
}
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index ee93e8b..7cb549b 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -225,7 +225,7 @@
set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law);
set_next_law(info->io_phys, law_size_bits(info->io_size), info->law);
is_endpoint = fsl_setup_hose(hose, info->regs);
- printf(" PCIE%u connected to %s as %s (base addr %lx)\n",
+ printf("PCIE%u: connected to %s as %s (base addr %lx)\n",
info->pci_num, connected,
is_endpoint ? "Endpoint" : "Root Complex", info->regs);
bus_number = fsl_pci_init_port(info, hose, bus_number);
@@ -255,7 +255,7 @@
SET_STD_PCIE_INFO(pci_info, 1);
configure_pcie(&pci_info, &pcie1_hose, serdes_slot_name(PCIE1));
} else {
- printf(" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
@@ -266,7 +266,7 @@
SET_STD_PCIE_INFO(pci_info, 2);
configure_pcie(&pci_info, &pcie2_hose, serdes_slot_name(PCIE2));
} else {
- printf(" PCIE2: disabled\n");
+ printf("PCIE2: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
@@ -277,7 +277,7 @@
SET_STD_PCIE_INFO(pci_info, 3);
configure_pcie(&pci_info, &pcie3_hose, serdes_slot_name(PCIE3));
} else {
- printf(" PCIE3: disabled\n");
+ printf("PCIE3: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c
index 97d4f83..e2ed29c 100644
--- a/board/freescale/p1_p2_rdb/pci.c
+++ b/board/freescale/p1_p2_rdb/pci.c
@@ -65,13 +65,13 @@
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 2);
pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
- printf(" PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
} else {
- printf (" PCIE2: disabled\n");
+ printf("PCIE2: disabled\n");
}
puts("\n");
#else
@@ -84,13 +84,13 @@
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf(" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf (" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
puts("\n");
#else
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index 608ff91..f988272 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -218,9 +218,9 @@
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)) {
SET_STD_PCIE_INFO(pci_info[num], 2);
pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
- printf(" PCIE2 connected to ULI as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE2: connected to ULI as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
@@ -245,7 +245,7 @@
}
#endif
} else {
- printf(" PCIE2: disabled\n");
+ printf("PCIE2: disabled\n");
}
puts("\n");
#else
@@ -258,13 +258,13 @@
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)) {
SET_STD_PCIE_INFO(pci_info[num], 3);
pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
- printf(" PCIE3 connected to Slot 1 as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE3: connected to Slot 1 as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie3_hose, first_free_busno);
} else {
- printf(" PCIE3: disabled\n");
+ printf("PCIE3: disabled\n");
}
puts("\n");
#else
@@ -277,13 +277,13 @@
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf(" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf(" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
puts("\n");
#else
diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c
index a302b91..0b8ea81 100644
--- a/board/pm854/pm854.c
+++ b/board/pm854/pm854.c
@@ -59,10 +59,10 @@
puts("Board: MicroSys PM854\n");
#ifdef CONFIG_PCI
- printf(" PCI1: 32 bit, %d MHz (compiled)\n",
+ printf("PCI1: 32 bit, %d MHz (compiled)\n",
CONFIG_SYS_CLK_FREQ / 1000000);
#else
- printf(" PCI1: disabled\n");
+ printf("PCI1: disabled\n");
#endif
/*
diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c
index f9d92d9..4e059b0 100644
--- a/board/pm856/pm856.c
+++ b/board/pm856/pm856.c
@@ -213,10 +213,10 @@
puts("Board: MicroSys PM856\n");
#ifdef CONFIG_PCI
- printf(" PCI1: 32 bit, %d MHz (compiled)\n",
+ printf("PCI1: 32 bit, %d MHz (compiled)\n",
CONFIG_SYS_CLK_FREQ / 1000000);
#else
- printf(" PCI1: disabled\n");
+ printf("PCI1: disabled\n");
#endif
/*
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index 733979c..272428f 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -342,7 +342,7 @@
uint pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
uint pci_speed = CONFIG_SYS_CLK_FREQ; /* get_clock_freq() */
- printf (" PCI host: %d bit, %s MHz, %s, %s\n",
+ printf("PCI: Host, %d bit, %s MHz, %s, %s\n",
(pci_32) ? 32 : 64,
(pci_speed == 33000000) ? "33" :
(pci_speed == 66000000) ? "66" : "unknown",
@@ -353,7 +353,7 @@
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pci1_hose, first_free_busno);
} else {
- printf (" PCI: disabled\n");
+ printf("PCI: disabled\n");
}
puts("\n");
@@ -368,11 +368,11 @@
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 1);
- printf (" PCIE at base address %lx\n", pci_info[num].regs);
+ printf("PCIE: base address %lx\n", pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf (" PCIE: disabled\n");
+ printf("PCIE: disabled\n");
}
puts("\n");
diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c
index d954d2f..5bf2364 100644
--- a/board/sbc8641d/sbc8641d.c
+++ b/board/sbc8641d/sbc8641d.c
@@ -221,29 +221,29 @@
if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf(" PCIE1 connected as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE1: connected as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- puts(" PCIE1: disabled\n");
+ puts("PCIE1: disabled\n");
}
#else
- puts(" PCIE1: disabled\n");
+ puts("PCIE1: disabled\n");
#endif /* CONFIG_PCIE1 */
#ifdef CONFIG_PCIE2
SET_STD_PCIE_INFO(pci_info[num], 2);
pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
- printf(" PCIE2 connected as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
+ printf("PCIE2: connected as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
#else
- puts(" PCIE2: disabled\n");
+ puts("PCIE2: disabled\n");
#endif /* CONFIG_PCIE2 */
}
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index b21e791..527af6d 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -567,7 +567,7 @@
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
SET_STD_PCI_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
- printf ("\n PCI1: %d bit, %s MHz, %s, %s, %s\n",
+ printf("PCI1: %d bit, %s MHz, %s, %s, %s\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333333) ? "33" :
(pci_speed == 66666666) ? "66" : "unknown",
@@ -591,7 +591,7 @@
}
#endif
} else {
- printf(" PCI1: disabled\n");
+ printf("PCI1: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1);
@@ -603,12 +603,12 @@
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf(" PCIE1 connected as %s\n",
+ printf("PCIE1: connected as %s\n",
pcie_ep ? "Endpoint" : "Root Complex");
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf(" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE);
diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c
index f425cee..4a0965b 100644
--- a/board/xes/common/fsl_8xxx_pci.c
+++ b/board/xes/common/fsl_8xxx_pci.c
@@ -95,7 +95,7 @@
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
SET_STD_PCI_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
- printf("\n PCI1: %d bit %s, %s %d MHz, %s, %s\n",
+ printf("PCI1: %d bit %s, %s %d MHz, %s, %s\n",
pci_32 ? 32 : 64,
pcix ? "PCIX" : "PCI",
pci_spd_norm ? ">=" : "<=",
@@ -106,7 +106,7 @@
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pci1_hose, first_free_busno);
} else {
- printf(" PCI1: disabled\n");
+ printf("PCI1: disabled\n");
}
#elif defined CONFIG_MPC8548
/* PCI1 not present on MPC8572 */
@@ -119,12 +119,12 @@
if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) {
SET_STD_PCIE_INFO(pci_info[num], 1);
pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf(" PCIE1 connected as %s\n",
+ printf("PCIE1: connected as %s\n",
pcie_ep ? "Endpoint" : "Root Complex");
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
} else {
- printf(" PCIE1: disabled\n");
+ printf("PCIE1: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE1);
@@ -136,12 +136,12 @@
if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) {
SET_STD_PCIE_INFO(pci_info[num], 2);
pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
- printf(" PCIE2 connected as %s\n",
+ printf("PCIE2: connected as %s\n",
pcie_ep ? "Endpoint" : "Root Complex");
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
} else {
- printf(" PCIE2: disabled\n");
+ printf("PCIE2: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE2);
@@ -153,12 +153,12 @@
if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) {
SET_STD_PCIE_INFO(pci_info[num], 3);
pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
- printf(" PCIE3 connected as %s\n",
+ printf("PCIE3: connected as %s\n",
pcie_ep ? "Endpoint" : "Root Complex");
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie3_hose, first_free_busno);
} else {
- printf(" PCIE3: disabled\n");
+ printf("PCIE3: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE3);