clk: stm32mp1: add debug information
Add support of clk dump command and
display information during probe (under CONFIG_DISPLAY_CPUINFO).
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c
index 916f9f9..09227cf 100644
--- a/drivers/clk/clk_stm32mp1.c
+++ b/drivers/clk/clk_stm32mp1.c
@@ -666,8 +666,8 @@
1, 2, 3, 4, 4, 4, 4, 4
};
-#ifdef DEBUG
-static const char * const stm32mp1_clk_parent_name[_PARENT_NB] = {
+static const __maybe_unused
+char * const stm32mp1_clk_parent_name[_PARENT_NB] = {
[_HSI] = "HSI",
[_HSE] = "HSE",
[_CSI] = "CSI",
@@ -705,7 +705,8 @@
[_DSI_PHY] = "DSI_PHY_PLL",
};
-static const char * const stm32mp1_clk_parent_sel_name[_PARENT_SEL_NB] = {
+static const __maybe_unused
+char * const stm32mp1_clk_parent_sel_name[_PARENT_SEL_NB] = {
[_I2C12_SEL] = "I2C12",
[_I2C35_SEL] = "I2C35",
[_I2C46_SEL] = "I2C46",
@@ -724,7 +725,6 @@
[_DSI_SEL] = "DSI",
[_ADC12_SEL] = "ADC12",
};
-#endif
static const struct stm32mp1_clk_data stm32mp1_data = {
.gate = stm32mp1_clk_gate,
@@ -1870,6 +1870,54 @@
}
}
+static void __maybe_unused stm32mp1_clk_dump(struct stm32mp1_clk_priv *priv)
+{
+ char buf[32];
+ int i, s, p;
+
+ printf("Clocks:\n");
+ for (i = 0; i < _PARENT_NB; i++) {
+ printf("- %s : %s MHz\n",
+ stm32mp1_clk_parent_name[i],
+ strmhz(buf, stm32mp1_clk_get(priv, i)));
+ }
+ printf("Source Clocks:\n");
+ for (i = 0; i < _PARENT_SEL_NB; i++) {
+ p = (readl(priv->base + priv->data->sel[i].offset) >>
+ priv->data->sel[i].src) & priv->data->sel[i].msk;
+ if (p < priv->data->sel[i].nb_parent) {
+ s = priv->data->sel[i].parent[p];
+ printf("- %s(%d) => parent %s(%d)\n",
+ stm32mp1_clk_parent_sel_name[i], i,
+ stm32mp1_clk_parent_name[s], s);
+ } else {
+ printf("- %s(%d) => parent index %d is invalid\n",
+ stm32mp1_clk_parent_sel_name[i], i, p);
+ }
+ }
+}
+
+#ifdef CONFIG_CMD_CLK
+int soc_clk_dump(void)
+{
+ struct udevice *dev;
+ struct stm32mp1_clk_priv *priv;
+ int ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_CLK,
+ DM_GET_DRIVER(stm32mp1_clock),
+ &dev);
+ if (ret)
+ return ret;
+
+ priv = dev_get_priv(dev);
+
+ stm32mp1_clk_dump(priv);
+
+ return 0;
+}
+#endif
+
static int stm32mp1_clk_probe(struct udevice *dev)
{
int result = 0;
@@ -1893,6 +1941,33 @@
result = stm32mp1_clktree(dev);
#endif
+#ifndef CONFIG_SPL_BUILD
+#if defined(DEBUG)
+ /* display debug information for probe after relocation */
+ if (gd->flags & GD_FLG_RELOC)
+ stm32mp1_clk_dump(priv);
+#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+ if (gd->flags & GD_FLG_RELOC) {
+ char buf[32];
+
+ printf("Clocks:\n");
+ printf("- MPU : %s MHz\n",
+ strmhz(buf, stm32mp1_clk_get(priv, _CK_MPU)));
+ printf("- MCU : %s MHz\n",
+ strmhz(buf, stm32mp1_clk_get(priv, _CK_MCU)));
+ printf("- AXI : %s MHz\n",
+ strmhz(buf, stm32mp1_clk_get(priv, _ACLK)));
+ printf("- PER : %s MHz\n",
+ strmhz(buf, stm32mp1_clk_get(priv, _CK_PER)));
+ /* DDRPHYC father */
+ printf("- DDR : %s MHz\n",
+ strmhz(buf, stm32mp1_clk_get(priv, _PLL2_R)));
+ }
+#endif /* CONFIG_DISPLAY_CPUINFO */
+#endif
+
return result;
}