mtd: pxa3xx_nand: port to use driver model
Use the generic DT code to find the device compatible property for us.
This makes the driver look more like other current drivers. It also make
it easier to add support for other variants like Armada 8K in a future
commit.
Signed-off-by: Shmuel Hazan <shmuel.h@siklu.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index cd7e598..160b599 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -195,6 +195,7 @@
config NAND_PXA3XX
bool "Support for NAND on PXA3xx and Armada 370/XP/38x"
select SYS_NAND_SELF_INIT
+ select DM_MTD
imply CMD_NAND
help
This enables the driver for the NAND flash device found on
diff --git a/drivers/mtd/nand/raw/pxa3xx_nand.c b/drivers/mtd/nand/raw/pxa3xx_nand.c
index 5fb3081..c9b7a42 100644
--- a/drivers/mtd/nand/raw/pxa3xx_nand.c
+++ b/drivers/mtd/nand/raw/pxa3xx_nand.c
@@ -22,6 +22,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/types.h>
+#include <dm/uclass.h>
+#include <dm/read.h>
#include "pxa3xx_nand.h"
@@ -417,6 +419,14 @@
/* convert nano-seconds to nand flash controller clock cycles */
#define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000)
+static const struct udevice_id pxa3xx_nand_dt_ids[] = {
+ {
+ .compatible = "marvell,mvebu-pxa3xx-nand",
+ .data = PXA3XX_NAND_VARIANT_ARMADA370,
+ },
+ {}
+};
+
static enum pxa3xx_nand_variant pxa3xx_nand_get_variant(void)
{
/* We only support the Armada 370/XP/38x for now */
@@ -1809,74 +1819,52 @@
return ret;
}
-static int pxa3xx_nand_probe_dt(struct pxa3xx_nand_info *info)
+static int pxa3xx_nand_probe_dt(struct udevice *dev, struct pxa3xx_nand_info *info)
{
struct pxa3xx_nand_platform_data *pdata;
- const void *blob = gd->fdt_blob;
- int node = -1;
pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
- /* Get address decoding nodes from the FDT blob */
- do {
- node = fdt_node_offset_by_compatible(blob, node,
- "marvell,mvebu-pxa3xx-nand");
- if (node < 0)
- break;
+ info->mmio_base = dev_read_addr_ptr(dev);
- /* Bypass disabeld nodes */
- if (!fdtdec_get_is_enabled(blob, node))
- continue;
+ pdata->num_cs = dev_read_u32_default(dev, "num-cs", 1);
+ if (pdata->num_cs != 1) {
+ pr_err("pxa3xx driver supports single CS only\n");
+ return -EINVAL;
+ }
- /* Get the first enabled NAND controler base address */
- info->mmio_base =
- (void __iomem *)fdtdec_get_addr_size_auto_noparent(
- blob, node, "reg", 0, NULL, true);
+ if (dev_read_bool(dev, "nand-enable-arbiter"))
+ pdata->enable_arbiter = 1;
- pdata->num_cs = fdtdec_get_int(blob, node, "num-cs", 1);
- if (pdata->num_cs != 1) {
- pr_err("pxa3xx driver supports single CS only\n");
- break;
- }
+ if (dev_read_bool(dev, "nand-keep-config"))
+ pdata->keep_config = 1;
- if (fdtdec_get_bool(blob, node, "nand-enable-arbiter"))
- pdata->enable_arbiter = 1;
+ /*
+ * ECC parameters.
+ * If these are not set, they will be selected according
+ * to the detected flash type.
+ */
+ /* ECC strength */
+ pdata->ecc_strength = dev_read_u32_default(dev, "nand-ecc-strength", 0);
- if (fdtdec_get_bool(blob, node, "nand-keep-config"))
- pdata->keep_config = 1;
+ /* ECC step size */
+ pdata->ecc_step_size = dev_read_u32_default(dev, "nand-ecc-step-size",
+ 0);
- /*
- * ECC parameters.
- * If these are not set, they will be selected according
- * to the detected flash type.
- */
- /* ECC strength */
- pdata->ecc_strength = fdtdec_get_int(blob, node,
- "nand-ecc-strength", 0);
+ info->pdata = pdata;
- /* ECC step size */
- pdata->ecc_step_size = fdtdec_get_int(blob, node,
- "nand-ecc-step-size", 0);
-
- info->pdata = pdata;
-
- /* Currently support only a single NAND controller */
- return 0;
-
- } while (node >= 0);
-
- return -EINVAL;
+ return 0;
}
-static int pxa3xx_nand_probe(struct pxa3xx_nand_info *info)
+static int pxa3xx_nand_probe(struct udevice *dev)
{
- struct mtd_info *mtd = &info->controller.active->mtd;
struct pxa3xx_nand_platform_data *pdata;
int ret, cs, probe_success;
+ struct pxa3xx_nand_info *info = dev_get_priv(dev);
- ret = pxa3xx_nand_probe_dt(info);
+ ret = pxa3xx_nand_probe_dt(dev, info);
if (ret)
return ret;
@@ -1884,7 +1872,7 @@
ret = alloc_nand_resource(info);
if (ret) {
- dev_err(mtd->dev, "alloc nand resource failed\n");
+ dev_err(dev, "alloc nand resource failed\n");
return ret;
}
@@ -1918,22 +1906,24 @@
return 0;
}
-/*
- * Main initialization routine
- */
+U_BOOT_DRIVER(pxa3xx_nand) = {
+ .name = "pxa3xx-nand",
+ .id = UCLASS_MTD,
+ .of_match = pxa3xx_nand_dt_ids,
+ .probe = pxa3xx_nand_probe,
+ .priv_auto_alloc_size = sizeof(struct pxa3xx_nand_info) +
+ sizeof(struct pxa3xx_nand_host) * CONFIG_SYS_MAX_NAND_DEVICE,
+};
+
void board_nand_init(void)
{
- struct pxa3xx_nand_info *info;
- struct pxa3xx_nand_host *host;
+ struct udevice *dev;
int ret;
- info = kzalloc(sizeof(*info) +
- sizeof(*host) * CONFIG_SYS_MAX_NAND_DEVICE,
- GFP_KERNEL);
- if (!info)
- return;
-
- ret = pxa3xx_nand_probe(info);
- if (ret)
- return;
+ ret = uclass_get_device_by_driver(UCLASS_MTD,
+ DM_GET_DRIVER(pxa3xx_nand), &dev);
+ if (ret && ret != -ENODEV) {
+ pr_err("Failed to initialize %s. (error %d)\n", dev->name,
+ ret);
+ }
}