x86: ivybridge: Add early init for PCH devices
Many PCH devices are hard-coded to a particular PCI address. Set these
up early in case they are needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/x86/cpu/ivybridge/Makefile b/arch/x86/cpu/ivybridge/Makefile
index 74f01e8..e5c0751 100644
--- a/arch/x86/cpu/ivybridge/Makefile
+++ b/arch/x86/cpu/ivybridge/Makefile
@@ -6,6 +6,7 @@
obj-y += car.o
obj-y += cpu.o
+obj-y += early_init.o
obj-y += lpc.o
obj-y += microcode_intel.o
obj-y += pci.o
diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c
index 0aca2f0..d5be2f5 100644
--- a/arch/x86/cpu/ivybridge/cpu.c
+++ b/arch/x86/cpu/ivybridge/cpu.c
@@ -4,6 +4,7 @@
* Graeme Russ, graeme.russ@gmail.com.
*
* Some portions from coreboot src/mainboard/google/link/romstage.c
+ * and src/cpu/intel/model_206ax/bootblock.c
* Copyright (C) 2007-2010 coresystems GmbH
* Copyright (C) 2011 Google Inc.
*
@@ -23,6 +24,7 @@
#include <asm/arch/model_206ax.h>
#include <asm/arch/microcode.h>
#include <asm/arch/pch.h>
+#include <asm/arch/sandybridge.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -180,6 +182,83 @@
return 0;
}
+static int enable_smbus(void)
+{
+ pci_dev_t dev;
+ uint16_t value;
+
+ /* Set the SMBus device statically. */
+ dev = PCI_BDF(0x0, 0x1f, 0x3);
+
+ /* Check to make sure we've got the right device. */
+ value = pci_read_config16(dev, 0x0);
+ if (value != 0x8086) {
+ printf("SMBus controller not found\n");
+ return -ENOSYS;
+ }
+
+ /* Set SMBus I/O base. */
+ pci_write_config32(dev, SMB_BASE,
+ SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
+
+ /* Set SMBus enable. */
+ pci_write_config8(dev, HOSTC, HST_EN);
+
+ /* Set SMBus I/O space enable. */
+ pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
+
+ /* Disable interrupt generation. */
+ outb(0, SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* Clear any lingering errors, so transactions can run. */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+ debug("SMBus controller enabled\n");
+
+ return 0;
+}
+
+#define PCH_EHCI0_TEMP_BAR0 0xe8000000
+#define PCH_EHCI1_TEMP_BAR0 0xe8000400
+#define PCH_XHCI_TEMP_BAR0 0xe8001000
+
+/*
+ * Setup USB controller MMIO BAR to prevent the reference code from
+ * resetting the controller.
+ *
+ * The BAR will be re-assigned during device enumeration so these are only
+ * temporary.
+ *
+ * This is used to speed up the resume path.
+ */
+static void enable_usb_bar(void)
+{
+ pci_dev_t usb0 = PCH_EHCI1_DEV;
+ pci_dev_t usb1 = PCH_EHCI2_DEV;
+ pci_dev_t usb3 = PCH_XHCI_DEV;
+ u32 cmd;
+
+ /* USB Controller 1 */
+ pci_write_config32(usb0, PCI_BASE_ADDRESS_0,
+ PCH_EHCI0_TEMP_BAR0);
+ cmd = pci_read_config32(usb0, PCI_COMMAND);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config32(usb0, PCI_COMMAND, cmd);
+
+ /* USB Controller 1 */
+ pci_write_config32(usb1, PCI_BASE_ADDRESS_0,
+ PCH_EHCI1_TEMP_BAR0);
+ cmd = pci_read_config32(usb1, PCI_COMMAND);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config32(usb1, PCI_COMMAND, cmd);
+
+ /* USB3 Controller */
+ pci_write_config32(usb3, PCI_BASE_ADDRESS_0,
+ PCH_XHCI_TEMP_BAR0);
+ cmd = pci_read_config32(usb3, PCI_COMMAND);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config32(usb3, PCI_COMMAND, cmd);
+}
+
static int report_bist_failure(void)
{
if (gd->arch.bist != 0) {
@@ -192,8 +271,11 @@
int print_cpuinfo(void)
{
+ enum pei_boot_mode_t boot_mode = PEI_BOOT_NONE;
char processor_name[CPU_MAX_NAME_LEN];
const char *name;
+ uint32_t pm1_cnt;
+ uint16_t pm1_sts;
int ret;
/* Halt if there was a built in self test failure */
@@ -205,9 +287,68 @@
if (ret && ret != -ENOENT && ret != -EEXIST)
return ret;
+ /* Enable upper 128bytes of CMOS */
+ writel(1 << 2, RCB_REG(RC));
+
+ /* TODO: cmos_post_init() */
+ if (readl(MCHBAR_REG(SSKPD)) == 0xCAFE) {
+ debug("soft reset detected\n");
+ boot_mode = PEI_BOOT_SOFT_RESET;
+
+ /* System is not happy after keyboard reset... */
+ debug("Issuing CF9 warm reset\n");
+ outb(0x6, 0xcf9);
+ cpu_hlt();
+ }
+
+ /* Early chipset init required before RAM init can work */
+ sandybridge_early_init(SANDYBRIDGE_MOBILE);
+
+ /* Check PM1_STS[15] to see if we are waking from Sx */
+ pm1_sts = inw(DEFAULT_PMBASE + PM1_STS);
+
+ /* Read PM1_CNT[12:10] to determine which Sx state */
+ pm1_cnt = inl(DEFAULT_PMBASE + PM1_CNT);
+
+ if ((pm1_sts & WAK_STS) && ((pm1_cnt >> 10) & 7) == 5) {
+#if CONFIG_HAVE_ACPI_RESUME
+ debug("Resume from S3 detected.\n");
+ boot_mode = PEI_BOOT_RESUME;
+ /* Clear SLP_TYPE. This will break stage2 but
+ * we care for that when we get there.
+ */
+ outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + PM1_CNT);
+#else
+ debug("Resume from S3 detected, but disabled.\n");
+#endif
+ } else {
+ /*
+ * TODO: An indication of life might be possible here (e.g.
+ * keyboard light)
+ */
+ }
+ post_code(POST_EARLY_INIT);
+
+ /* Enable SPD ROMs and DDR-III DRAM */
+ ret = enable_smbus();
+ if (ret)
+ return ret;
+
+ /* Prepare USB controller early in S3 resume */
+ if (boot_mode == PEI_BOOT_RESUME)
+ enable_usb_bar();
+
+ gd->arch.pei_boot_mode = boot_mode;
+
+ /* TODO: Move this to the board or driver */
+ pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);
+ pci_write_config32(PCH_LPC_DEV, GPIO_CNTL, 0x10);
+
/* Print processor name */
name = cpu_get_name(processor_name);
printf("CPU: %s\n", name);
+ post_code(POST_CPU_INFO);
+
return 0;
}
diff --git a/arch/x86/cpu/ivybridge/early_init.c b/arch/x86/cpu/ivybridge/early_init.c
new file mode 100644
index 0000000..eb8f613
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/early_init.c
@@ -0,0 +1,145 @@
+/*
+ * From Coreboot
+ *
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2011 Google Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/arch/pch.h>
+#include <asm/arch/sandybridge.h>
+
+static void sandybridge_setup_bars(pci_dev_t pch_dev, pci_dev_t lpc_dev)
+{
+ /* Setting up Southbridge. In the northbridge code. */
+ debug("Setting up static southbridge registers\n");
+ pci_write_config32(lpc_dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
+
+ pci_write_config32(lpc_dev, PMBASE, DEFAULT_PMBASE | 1);
+ pci_write_config8(lpc_dev, ACPI_CNTL, 0x80); /* Enable ACPI BAR */
+
+ debug("Disabling watchdog reboot\n");
+ setbits_le32(RCB_REG(GCS), 1 >> 5); /* No reset */
+ outw(1 << 11, DEFAULT_PMBASE | 0x60 | 0x08); /* halt timer */
+
+ /* Set up all hardcoded northbridge BARs */
+ debug("Setting up static registers\n");
+ pci_write_config32(pch_dev, EPBAR, DEFAULT_EPBAR | 1);
+ pci_write_config32(pch_dev, EPBAR + 4, (0LL + DEFAULT_EPBAR) >> 32);
+ pci_write_config32(pch_dev, MCHBAR, DEFAULT_MCHBAR | 1);
+ pci_write_config32(pch_dev, MCHBAR + 4, (0LL + DEFAULT_MCHBAR) >> 32);
+ /* 64MB - busses 0-63 */
+ pci_write_config32(pch_dev, PCIEXBAR, DEFAULT_PCIEXBAR | 5);
+ pci_write_config32(pch_dev, PCIEXBAR + 4,
+ (0LL + DEFAULT_PCIEXBAR) >> 32);
+ pci_write_config32(pch_dev, DMIBAR, DEFAULT_DMIBAR | 1);
+ pci_write_config32(pch_dev, DMIBAR + 4, (0LL + DEFAULT_DMIBAR) >> 32);
+
+ /* Set C0000-FFFFF to access RAM on both reads and writes */
+ pci_write_config8(pch_dev, PAM0, 0x30);
+ pci_write_config8(pch_dev, PAM1, 0x33);
+ pci_write_config8(pch_dev, PAM2, 0x33);
+ pci_write_config8(pch_dev, PAM3, 0x33);
+ pci_write_config8(pch_dev, PAM4, 0x33);
+ pci_write_config8(pch_dev, PAM5, 0x33);
+ pci_write_config8(pch_dev, PAM6, 0x33);
+}
+
+static void sandybridge_setup_graphics(pci_dev_t pch_dev, pci_dev_t video_dev)
+{
+ u32 reg32;
+ u16 reg16;
+ u8 reg8;
+
+ reg16 = pci_read_config16(video_dev, PCI_DEVICE_ID);
+ switch (reg16) {
+ case 0x0102: /* GT1 Desktop */
+ case 0x0106: /* GT1 Mobile */
+ case 0x010a: /* GT1 Server */
+ case 0x0112: /* GT2 Desktop */
+ case 0x0116: /* GT2 Mobile */
+ case 0x0122: /* GT2 Desktop >=1.3GHz */
+ case 0x0126: /* GT2 Mobile >=1.3GHz */
+ case 0x0156: /* IvyBridge */
+ case 0x0166: /* IvyBridge */
+ break;
+ default:
+ debug("Graphics not supported by this CPU/chipset\n");
+ return;
+ }
+
+ debug("Initialising Graphics\n");
+
+ /* Setup IGD memory by setting GGC[7:3] = 1 for 32MB */
+ reg16 = pci_read_config16(pch_dev, GGC);
+ reg16 &= ~0x00f8;
+ reg16 |= 1 << 3;
+ /* Program GTT memory by setting GGC[9:8] = 2MB */
+ reg16 &= ~0x0300;
+ reg16 |= 2 << 8;
+ /* Enable VGA decode */
+ reg16 &= ~0x0002;
+ pci_write_config16(pch_dev, GGC, reg16);
+
+ /* Enable 256MB aperture */
+ reg8 = pci_read_config8(video_dev, MSAC);
+ reg8 &= ~0x06;
+ reg8 |= 0x02;
+ pci_write_config8(video_dev, MSAC, reg8);
+
+ /* Erratum workarounds */
+ reg32 = readl(MCHBAR_REG(0x5f00));
+ reg32 |= (1 << 9) | (1 << 10);
+ writel(reg32, MCHBAR_REG(0x5f00));
+
+ /* Enable SA Clock Gating */
+ reg32 = readl(MCHBAR_REG(0x5f00));
+ writel(reg32 | 1, MCHBAR_REG(0x5f00));
+
+ /* GPU RC6 workaround for sighting 366252 */
+ reg32 = readl(MCHBAR_REG(0x5d14));
+ reg32 |= (1 << 31);
+ writel(reg32, MCHBAR_REG(0x5d14));
+
+ /* VLW */
+ reg32 = readl(MCHBAR_REG(0x6120));
+ reg32 &= ~(1 << 0);
+ writel(reg32, MCHBAR_REG(0x6120));
+
+ reg32 = readl(MCHBAR_REG(0x5418));
+ reg32 |= (1 << 4) | (1 << 5);
+ writel(reg32, MCHBAR_REG(0x5418));
+}
+
+void sandybridge_early_init(int chipset_type)
+{
+ pci_dev_t pch_dev = PCH_DEV;
+ pci_dev_t video_dev = PCH_VIDEO_DEV;
+ pci_dev_t lpc_dev = PCH_LPC_DEV;
+ u32 capid0_a;
+ u8 reg8;
+
+ /* Device ID Override Enable should be done very early */
+ capid0_a = pci_read_config32(pch_dev, 0xe4);
+ if (capid0_a & (1 << 10)) {
+ reg8 = pci_read_config8(pch_dev, 0xf3);
+ reg8 &= ~7; /* Clear 2:0 */
+
+ if (chipset_type == SANDYBRIDGE_MOBILE)
+ reg8 |= 1; /* Set bit 0 */
+
+ pci_write_config8(pch_dev, 0xf3, reg8);
+ }
+
+ /* Setup all BARs required for early PCIe and raminit */
+ sandybridge_setup_bars(pch_dev, lpc_dev);
+
+ /* Device Enable */
+ pci_write_config32(pch_dev, DEVEN, DEVEN_HOST | DEVEN_IGD);
+
+ sandybridge_setup_graphics(pch_dev, video_dev);
+}
diff --git a/arch/x86/include/asm/arch-ivybridge/pch.h b/arch/x86/include/asm/arch-ivybridge/pch.h
index c572f76..290a737 100644
--- a/arch/x86/include/asm/arch-ivybridge/pch.h
+++ b/arch/x86/include/asm/arch-ivybridge/pch.h
@@ -14,9 +14,30 @@
#include <pci.h>
+#define DEFAULT_GPIOBASE 0x0480
+#define DEFAULT_PMBASE 0x0500
+
+#define SMBUS_IO_BASE 0x0400
+
+#define PCH_EHCI1_DEV PCI_BDF(0, 0x1d, 0)
+#define PCH_EHCI2_DEV PCI_BDF(0, 0x1a, 0)
+#define PCH_XHCI_DEV PCI_BDF(0, 0x14, 0)
+#define PCH_ME_DEV PCI_BDF(0, 0x16, 0)
+#define PCH_PCIE_DEV_SLOT 28
+
+#define PCH_DEV PCI_BDF(0, 0, 0)
+#define PCH_VIDEO_DEV PCI_BDF(0, 2, 0)
+
/* PCI Configuration Space (D31:F0): LPC */
#define PCH_LPC_DEV PCI_BDF(0, 0x1f, 0)
+#define PMBASE 0x40
+#define ACPI_CNTL 0x44
+#define BIOS_CNTL 0xDC
+#define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */
+#define GPIO_CNTL 0x4C /* LPC GPIO Control Register */
+#define GPIO_ROUT 0xb8
+
#define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */
#define LPC_EN 0x82 /* LPC IF Enables Register */
#define CNF2_LPC_EN (1 << 13) /* 0x4e/0x4f */
@@ -35,9 +56,35 @@
#define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */
#define LPC_GENX_DEC(x) (0x84 + 4 * (x))
-#define DEFAULT_RCBA 0xfed1c000
+/* PCI Configuration Space (D31:F3): SMBus */
+#define PCH_SMBUS_DEV PCI_BDF(0, 0x1f, 3)
+#define SMB_BASE 0x20
+#define HOSTC 0x40
+#define SMB_RCV_SLVA 0x09
+
+/* HOSTC bits */
+#define I2C_EN (1 << 2)
+#define SMB_SMI_EN (1 << 1)
+#define HST_EN (1 << 0)
+
+/* SMBus I/O bits. */
+#define SMBHSTSTAT 0x0
+#define SMBHSTCTL 0x2
+#define SMBHSTCMD 0x3
+#define SMBXMITADD 0x4
+#define SMBHSTDAT0 0x5
+#define SMBHSTDAT1 0x6
+#define SMBBLKDAT 0x7
+#define SMBTRNSADD 0x9
+#define SMBSLVDATA 0xa
+#define SMLINK_PIN_CTL 0xe
+#define SMBUS_PIN_CTL 0xf
+
+#define SMBUS_TIMEOUT (10 * 1000 * 100)
+
/* Root Complex Register Block */
+#define DEFAULT_RCBA 0xfed1c000
#define RCB_REG(reg) (DEFAULT_RCBA + (reg))
#define PCH_RCBA_BASE 0xf0
@@ -95,6 +142,78 @@
#define FD2 0x3428 /* 32bit */
#define CG 0x341c /* 32bit */
+/* ICH7 PMBASE */
+#define PM1_STS 0x00
+#define WAK_STS (1 << 15)
+#define PCIEXPWAK_STS (1 << 14)
+#define PRBTNOR_STS (1 << 11)
+#define RTC_STS (1 << 10)
+#define PWRBTN_STS (1 << 8)
+#define GBL_STS (1 << 5)
+#define BM_STS (1 << 4)
+#define TMROF_STS (1 << 0)
+#define PM1_EN 0x02
+#define PCIEXPWAK_DIS (1 << 14)
+#define RTC_EN (1 << 10)
+#define PWRBTN_EN (1 << 8)
+#define GBL_EN (1 << 5)
+#define TMROF_EN (1 << 0)
+#define PM1_CNT 0x04
+#define SLP_EN (1 << 13)
+#define SLP_TYP (7 << 10)
+#define SLP_TYP_S0 0
+#define SLP_TYP_S1 1
+#define SLP_TYP_S3 5
+#define SLP_TYP_S4 6
+#define SLP_TYP_S5 7
+#define GBL_RLS (1 << 2)
+#define BM_RLD (1 << 1)
+#define SCI_EN (1 << 0)
+#define PM1_TMR 0x08
+#define PROC_CNT 0x10
+#define LV2 0x14
+#define LV3 0x15
+#define LV4 0x16
+#define PM2_CNT 0x50 /* mobile only */
+#define GPE0_STS 0x20
+#define PME_B0_STS (1 << 13)
+#define PME_STS (1 << 11)
+#define BATLOW_STS (1 << 10)
+#define PCI_EXP_STS (1 << 9)
+#define RI_STS (1 << 8)
+#define SMB_WAK_STS (1 << 7)
+#define TCOSCI_STS (1 << 6)
+#define SWGPE_STS (1 << 2)
+#define HOT_PLUG_STS (1 << 1)
+#define GPE0_EN 0x28
+#define PME_B0_EN (1 << 13)
+#define PME_EN (1 << 11)
+#define TCOSCI_EN (1 << 6)
+#define SMI_EN 0x30
+#define INTEL_USB2_EN (1 << 18) /* Intel-Specific USB2 SMI logic */
+#define LEGACY_USB2_EN (1 << 17) /* Legacy USB2 SMI logic */
+#define PERIODIC_EN (1 << 14) /* SMI on PERIODIC_STS in SMI_STS */
+#define TCO_EN (1 << 13) /* Enable TCO Logic (BIOSWE et al) */
+#define MCSMI_EN (1 << 11) /* Trap microcontroller range access */
+#define BIOS_RLS (1 << 7) /* asserts SCI on bit set */
+#define SWSMI_TMR_EN (1 << 6) /* start software smi timer on bit set */
+#define APMC_EN (1 << 5) /* Writes to APM_CNT cause SMI# */
+#define SLP_SMI_EN (1 << 4) /* Write SLP_EN in PM1_CNT asserts SMI# */
+#define LEGACY_USB_EN (1 << 3) /* Legacy USB circuit SMI logic */
+#define BIOS_EN (1 << 2) /* Assert SMI# on setting GBL_RLS bit */
+#define EOS (1 << 1) /* End of SMI (deassert SMI#) */
+#define GBL_SMI_EN (1 << 0) /* SMI# generation at all? */
+#define SMI_STS 0x34
+#define ALT_GP_SMI_EN 0x38
+#define ALT_GP_SMI_STS 0x3a
+#define GPE_CNTL 0x42
+#define DEVACT_STS 0x44
+#define SS_CNT 0x50
+#define C3_RES 0x54
+#define TCO1_STS 0x64
+#define DMISCI_STS (1 << 9)
+#define TCO2_STS 0x66
+
/**
* lpc_early_init() - set up LPC serial ports and other early things
*
diff --git a/arch/x86/include/asm/arch-ivybridge/sandybridge.h b/arch/x86/include/asm/arch-ivybridge/sandybridge.h
new file mode 100644
index 0000000..a1072f2
--- /dev/null
+++ b/arch/x86/include/asm/arch-ivybridge/sandybridge.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * From Coreboot file of the same name
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ * Copyright (C) 2011 Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _ACH_ASM_SANDYBRIDGE_H
+#define _ACH_ASM_SANDYBRIDGE_H
+
+/* Chipset types */
+#define SANDYBRIDGE_MOBILE 0
+#define SANDYBRIDGE_DESKTOP 1
+#define SANDYBRIDGE_SERVER 2
+
+/* Device ID for SandyBridge and IvyBridge */
+#define BASE_REV_SNB 0x00
+#define BASE_REV_IVB 0x50
+#define BASE_REV_MASK 0x50
+
+/* SandyBridge CPU stepping */
+#define SNB_STEP_D0 (BASE_REV_SNB + 5) /* Also J0 */
+#define SNB_STEP_D1 (BASE_REV_SNB + 6)
+#define SNB_STEP_D2 (BASE_REV_SNB + 7) /* Also J1/Q0 */
+
+/* IvyBridge CPU stepping */
+#define IVB_STEP_A0 (BASE_REV_IVB + 0)
+#define IVB_STEP_B0 (BASE_REV_IVB + 2)
+#define IVB_STEP_C0 (BASE_REV_IVB + 4)
+#define IVB_STEP_K0 (BASE_REV_IVB + 5)
+#define IVB_STEP_D0 (BASE_REV_IVB + 6)
+
+/* Intel Enhanced Debug region must be 4MB */
+#define IED_SIZE 0x400000
+
+/* Northbridge BARs */
+#define DEFAULT_MCHBAR 0xfed10000 /* 16 KB */
+#define DEFAULT_DMIBAR 0xfed18000 /* 4 KB */
+#define DEFAULT_EPBAR 0xfed19000 /* 4 KB */
+#define DEFAULT_RCBABASE 0xfed1c000
+/* 4 KB per PCIe device */
+#define DEFAULT_PCIEXBAR CONFIG_MMCONF_BASE_ADDRESS
+
+/* Device 0:0.0 PCI configuration space (Host Bridge) */
+#define EPBAR 0x40
+#define MCHBAR 0x48
+#define PCIEXBAR 0x60
+#define DMIBAR 0x68
+#define X60BAR 0x60
+
+#define GGC 0x50 /* GMCH Graphics Control */
+
+#define DEVEN 0x54 /* Device Enable */
+#define DEVEN_PEG60 (1 << 13)
+#define DEVEN_IGD (1 << 4)
+#define DEVEN_PEG10 (1 << 3)
+#define DEVEN_PEG11 (1 << 2)
+#define DEVEN_PEG12 (1 << 1)
+#define DEVEN_HOST (1 << 0)
+
+#define PAM0 0x80
+#define PAM1 0x81
+#define PAM2 0x82
+#define PAM3 0x83
+#define PAM4 0x84
+#define PAM5 0x85
+#define PAM6 0x86
+
+#define LAC 0x87 /* Legacy Access Control */
+#define SMRAM 0x88 /* System Management RAM Control */
+#define D_OPEN (1 << 6)
+#define D_CLS (1 << 5)
+#define D_LCK (1 << 4)
+#define G_SMRAME (1 << 3)
+#define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0))
+
+#define TOM 0xa0
+#define TOUUD 0xa8 /* Top of Upper Usable DRAM */
+#define TSEG 0xb8 /* TSEG base */
+#define TOLUD 0xbc /* Top of Low Used Memory */
+
+#define SKPAD 0xdc /* Scratchpad Data */
+
+/* Device 0:1.0 PCI configuration space (PCI Express) */
+#define BCTRL1 0x3e /* 16bit */
+
+/* Device 0:2.0 PCI configuration space (Graphics Device) */
+
+#define MSAC 0x62 /* Multi Size Aperture Control */
+#define SWSCI 0xe8 /* SWSCI enable */
+#define ASLS 0xfc /* OpRegion Base */
+
+/*
+ * MCHBAR
+ */
+#define MCHBAR_REG(reg) (DEFAULT_RCBA + (reg))
+
+#define SSKPD 0x5d14 /* 16bit (scratchpad) */
+#define BIOS_RESET_CPL 0x5da8 /* 8bit */
+
+void sandybridge_early_init(int chipset_type);
+
+#endif
diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h
index d32987b..ff9574c 100644
--- a/arch/x86/include/asm/global_data.h
+++ b/arch/x86/include/asm/global_data.h
@@ -10,6 +10,13 @@
#ifndef __ASSEMBLY__
+enum pei_boot_mode_t {
+ PEI_BOOT_NONE = 0,
+ PEI_BOOT_SOFT_RESET,
+ PEI_BOOT_RESUME,
+
+};
+
/* Architecture-specific global data */
struct arch_global_data {
struct global_data *gd_addr; /* Location of Global Data */
@@ -25,6 +32,7 @@
void *new_fdt; /* Relocated FDT */
uint32_t bist; /* Built-in self test value */
struct pci_controller *hose; /* PCI hose for early use */
+ enum pei_boot_mode_t pei_boot_mode;
};
#endif
diff --git a/arch/x86/include/asm/post.h b/arch/x86/include/asm/post.h
index b203dc9..61dcda1 100644
--- a/arch/x86/include/asm/post.h
+++ b/arch/x86/include/asm/post.h
@@ -25,6 +25,8 @@
#define POST_START_STACK 0x29
#define POST_START_DONE 0x2a
#define POST_CPU_INIT 0x2b
+#define POST_EARLY_INIT 0x2c
+#define POST_CPU_INFO 0x2d
/* Output a post code using al - value must be 0 to 0xff */
#ifdef __ASSEMBLY__