Coding Style cleanup
diff --git a/CHANGELOG b/CHANGELOG
index 2348df6..57b4e78 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
Changes since U-Boot 1.1.4:
======================================================================
+* Coding Style cleanup
+
* Avoid dereferencing NULL in find_cmd() if no valid commands were found
Patch by Andrew Dyer, 13 Jun 2005
@@ -34,7 +36,7 @@
* Add support for Adder boards with 16MB SDRAM;
add support for second FEC on Adder87x board.
Patch by Yuli Barcohen, 05 Jun 2005
-
+
* Fix conditional for including ks8695eth driver
Patch by Greg Ungerer, 04 Jun 2005
diff --git a/Makefile b/Makefile
index 0c8137f..65c457e 100644
--- a/Makefile
+++ b/Makefile
@@ -1899,7 +1899,7 @@
rm -f tools/env/fw_printenv tools/env/fw_setenv
rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
rm -f board/netstar/eeprom board/netstar/crcek
- rm -f board/netstar/*.srec board/netstar/*.bin
+ rm -f board/netstar/*.srec board/netstar/*.bin
rm -f board/trab/trab_fkt board/voiceblue/eeprom
rm -f board/integratorap/u-boot.lds board/integratorcp/u-boot.lds
diff --git a/board/ezkit533/config.mk b/board/ezkit533/config.mk
index e4c089d..36c9f99 100644
--- a/board/ezkit533/config.mk
+++ b/board/ezkit533/config.mk
@@ -23,4 +23,3 @@
TEXT_BASE = 0x01FC0000
PLATFORM_CPPFLAGS += -I$(TOPDIR)
-
diff --git a/board/ezkit533/flash.c b/board/ezkit533/flash.c
index 0b59232..b0a0796 100644
--- a/board/ezkit533/flash.c
+++ b/board/ezkit533/flash.c
@@ -142,15 +142,15 @@
int prot,sect;
prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect])
- prot++;
- }
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect])
+ prot++;
+ }
if (prot)
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
- else
- printf ("\n");
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+ else
+ printf ("\n");
cnt = s_last - s_first + 1;
diff --git a/board/ezkit533/psd4256.h b/board/ezkit533/psd4256.h
index 9ae678b..01f6566 100644
--- a/board/ezkit533/psd4256.h
+++ b/board/ezkit533/psd4256.h
@@ -65,4 +65,3 @@
#define PSDA_LED6 0x04 /* LED 6, 1 = LED ON */
#define PSDA_LED5 0x02 /* LED 5, 1 = LED ON */
#define PSDA_LED4 0x01 /* LED 4, 1 = LED ON */
-
diff --git a/board/ezkit533/u-boot.lds b/board/ezkit533/u-boot.lds
index f58b489..10203ff 100644
--- a/board/ezkit533/u-boot.lds
+++ b/board/ezkit533/u-boot.lds
@@ -146,4 +146,3 @@
_end = . ;
PROVIDE (end = .);
}
-
diff --git a/board/stamp/config.mk b/board/stamp/config.mk
index 4ec82cb..0d00730 100644
--- a/board/stamp/config.mk
+++ b/board/stamp/config.mk
@@ -23,4 +23,3 @@
TEXT_BASE = 0x07FC0000
PLATFORM_CPPFLAGS += -I$(TOPDIR)
-
diff --git a/board/stamp/stamp.c b/board/stamp/stamp.c
index 8485f58..3fe0134 100644
--- a/board/stamp/stamp.c
+++ b/board/stamp/stamp.c
@@ -30,71 +30,71 @@
#include "stamp.h"
#define STATUS_LED_OFF 0
-#define STATUS_LED_ON 1
+#define STATUS_LED_ON 1
#ifdef CONFIG_SHOW_BOOT_PROGRESS
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
#else
-# define SHOW_BOOT_PROGRESS(arg)
+# define SHOW_BOOT_PROGRESS(arg)
#endif
-int checkboard(void)
+int checkboard (void)
{
- printf("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
- printf("Board: ADI BF533 Stamp board\n");
- printf(" Support: http://blackfin.uclinux.org/\n");
- printf(" Richard Klingler <richard@uclinux.net>\n");
+ printf ("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
+ printf ("Board: ADI BF533 Stamp board\n");
+ printf (" Support: http://blackfin.uclinux.org/\n");
+ printf (" Richard Klingler <richard@uclinux.net>\n");
return 0;
}
-long int initdram(int board_type)
+long int initdram (int board_type)
{
DECLARE_GLOBAL_DATA_PTR;
#ifdef DEBUG
- printf("SDRAM attributes:\n");
- printf(" tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; "
- "CAS Latency:%d cycles\n", (SDRAM_tRCD >> 15), (SDRAM_tRP >> 11),
- (SDRAM_tRAS >> 6), ( SDRAM_tWR >> 19), (SDRAM_CL >> 2 ));
- printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
- printf("Bank size = %d MB\n", 128);
+ printf ("SDRAM attributes:\n");
+ printf (" tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; "
+ "CAS Latency:%d cycles\n",
+ (SDRAM_tRCD >> 15),
+ (SDRAM_tRP >> 11),
+ (SDRAM_tRAS >> 6),
+ (SDRAM_tWR >> 19),
+ (SDRAM_CL >> 2));
+ printf ("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
+ printf ("Bank size = %d MB\n", 128);
#endif
gd->bd->bi_memstart = CFG_SDRAM_BASE;
gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
return (gd->bd->bi_memsize);
}
-void swap_to(int device_id)
+void swap_to (int device_id)
{
- if (device_id == ETHERNET)
- {
+ if (device_id == ETHERNET) {
*pFIO_DIR = PF0;
- asm("ssync;");
+ asm ("ssync;");
*pFIO_FLAG_S = PF0;
- asm("ssync;");
- }
- else if (device_id == FLASH)
- {
+ asm ("ssync;");
+ } else if (device_id == FLASH) {
*pFIO_DIR = (PF4 | PF3 | PF2 | PF1 | PF0);
- *pFIO_FLAG_S = (PF4 | PF3 | PF2 );
+ *pFIO_FLAG_S = (PF4 | PF3 | PF2);
*pFIO_MASKA_D = (PF8 | PF6 | PF5);
*pFIO_MASKB_D = (PF7);
- *pFIO_POLAR = (PF8 | PF6 | PF5 );
+ *pFIO_POLAR = (PF8 | PF6 | PF5);
*pFIO_EDGE = (PF8 | PF7 | PF6 | PF5);
*pFIO_INEN = (PF8 | PF7 | PF6 | PF5);
- *pFIO_FLAG_D = (PF4 | PF3 | PF2 );
- asm("ssync;");
+ *pFIO_FLAG_D = (PF4 | PF3 | PF2);
+ asm ("ssync;");
+ } else {
+ printf ("Unknown bank to switch\n");
}
- else {
- printf("Unknown bank to switch\n");
- }
-
+
return;
}
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
-int misc_init_r(void)
+int misc_init_r (void)
{
int i;
int cf_stat = 0;
@@ -102,40 +102,39 @@
/* Check whether CF card is inserted */
*pFIO_EDGE = FIO_EDGE_CF_BITS;
*pFIO_POLAR = FIO_POLAR_CF_BITS;
- for (i=0; i < 0x300 ; i++) asm("nop;");
-
- if ( (*pFIO_FLAG_S) & CF_STAT_BITS)
- {
+ for (i = 0; i < 0x300; i++)
+ asm ("nop;");
+
+ if ((*pFIO_FLAG_S) & CF_STAT_BITS) {
cf_stat = 0;
- }
- else
- {
+ } else {
cf_stat = 1;
}
- *pFIO_EDGE = FIO_EDGE_BITS;
+ *pFIO_EDGE = FIO_EDGE_BITS;
*pFIO_POLAR = FIO_POLAR_BITS;
-
- if (cf_stat)
- {
- printf ("Booting from COMPACT flash\n");
+
+ if (cf_stat) {
+ printf ("Booting from COMPACT flash\n");
/* Set cycle time for CF */
*(volatile unsigned long *) ambctl1 = CF_AMBCTL1VAL;
- for (i=0; i < 0x1000 ; i++) asm("nop;");
- for (i=0; i < 0x1000 ; i++) asm("nop;");
- for (i=0; i < 0x1000 ; i++) asm("nop;");
+ for (i = 0; i < 0x1000; i++)
+ asm ("nop;");
+ for (i = 0; i < 0x1000; i++)
+ asm ("nop;");
+ for (i = 0; i < 0x1000; i++)
+ asm ("nop;");
- serial_setbrg();
- ide_init();
+ serial_setbrg ();
+ ide_init ();
setenv ("bootargs", "");
- setenv ("bootcmd", "fatload ide 0:1 0x1000000 uImage-stamp;bootm 0x1000000;bootm 0x20100000" );
- }
- else
- {
+ setenv ("bootcmd",
+ "fatload ide 0:1 0x1000000 uImage-stamp;bootm 0x1000000;bootm 0x20100000");
+ } else {
printf ("Booting from FLASH\n");
}
@@ -145,134 +144,132 @@
#ifdef CONFIG_STAMP_CF
-void cf_outb(unsigned char val, volatile unsigned char* addr)
+void cf_outb (unsigned char val, volatile unsigned char *addr)
{
- /*
+ /*
* Set PF1 PF0 respectively to 0 1 to divert address
- * to the expansion memory banks
+ * to the expansion memory banks
*/
*pFIO_FLAG_S = CF_PF0;
*pFIO_FLAG_C = CF_PF1;
- asm("ssync;");
+ asm ("ssync;");
*(addr) = val;
- asm("ssync;");
+ asm ("ssync;");
- /* Setback PF1 PF0 to 0 0 to address external
+ /* Setback PF1 PF0 to 0 0 to address external
* memory banks */
*(volatile unsigned short *) pFIO_FLAG_C = CF_PF1_PF0;
- asm("ssync;");
+ asm ("ssync;");
}
-unsigned char cf_inb(volatile unsigned char *addr)
+unsigned char cf_inb (volatile unsigned char *addr)
{
volatile unsigned char c;
*pFIO_FLAG_S = CF_PF0;
*pFIO_FLAG_C = CF_PF1;
- asm("ssync;");
+ asm ("ssync;");
c = *(addr);
- asm("ssync;");
+ asm ("ssync;");
*pFIO_FLAG_C = CF_PF1_PF0;
- asm("ssync;");
+ asm ("ssync;");
return c;
}
-void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words)
+void cf_insw (unsigned short *sect_buf, unsigned short *addr, int words)
{
int i;
*pFIO_FLAG_S = CF_PF0;
*pFIO_FLAG_C = CF_PF1;
- asm("ssync;");
+ asm ("ssync;");
- for (i = 0;i < words; i++)
- {
+ for (i = 0; i < words; i++) {
*(sect_buf + i) = *(addr);
- asm("ssync;");
+ asm ("ssync;");
}
*pFIO_FLAG_C = CF_PF1_PF0;
- asm("ssync;");
+ asm ("ssync;");
}
-void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
+void cf_outsw (unsigned short *addr, unsigned short *sect_buf, int words)
{
int i;
*pFIO_FLAG_S = CF_PF0;
*pFIO_FLAG_C = CF_PF1;
- asm("ssync;");
+ asm ("ssync;");
- for (i = 0;i < words; i++)
- {
+ for (i = 0; i < words; i++) {
*(addr) = *(sect_buf + i);
- asm("ssync;");
+ asm ("ssync;");
}
*pFIO_FLAG_C = CF_PF1_PF0;
- asm("ssync;");
+ asm ("ssync;");
}
#endif
-void stamp_led_set(int LED1, int LED2, int LED3)
+void stamp_led_set (int LED1, int LED2, int LED3)
{
- *pFIO_INEN &= ~( PF2 | PF3 | PF4);
- *pFIO_DIR |= ( PF2 | PF3 | PF4);
-
- if(LED1 == STATUS_LED_OFF)
+ *pFIO_INEN &= ~(PF2 | PF3 | PF4);
+ *pFIO_DIR |= (PF2 | PF3 | PF4);
+
+ if (LED1 == STATUS_LED_OFF)
*pFIO_FLAG_S = PF2;
else
*pFIO_FLAG_C = PF2;
- if(LED2 == STATUS_LED_OFF)
+ if (LED2 == STATUS_LED_OFF)
*pFIO_FLAG_S = PF3;
else
*pFIO_FLAG_C = PF3;
- if(LED3 == STATUS_LED_OFF)
+ if (LED3 == STATUS_LED_OFF)
*pFIO_FLAG_S = PF4;
else
*pFIO_FLAG_C = PF4;
- asm("ssync;");
+ asm ("ssync;");
}
-void show_boot_progress(int status)
+void show_boot_progress (int status)
{
- switch(status){
- case 1:
- stamp_led_set(STATUS_LED_OFF,STATUS_LED_OFF,STATUS_LED_ON);
- break;
- case 2:
- stamp_led_set(STATUS_LED_OFF,STATUS_LED_ON,STATUS_LED_OFF);
- break;
- case 3:
- stamp_led_set(STATUS_LED_OFF,STATUS_LED_ON,STATUS_LED_ON);
- break;
- case 4:
- stamp_led_set(STATUS_LED_ON,STATUS_LED_OFF,STATUS_LED_OFF);
- break;
- case 5:
- case 6:
- stamp_led_set(STATUS_LED_ON,STATUS_LED_OFF,STATUS_LED_ON);
- break;
- case 7:
- case 8:
- stamp_led_set(STATUS_LED_ON,STATUS_LED_ON,STATUS_LED_OFF);
- break;
- case 9:
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- stamp_led_set(STATUS_LED_OFF,STATUS_LED_OFF,STATUS_LED_OFF);
- break;
- default:
- stamp_led_set(STATUS_LED_ON,STATUS_LED_ON,STATUS_LED_ON);
- break;
+ switch (status) {
+ case 1:
+ stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_ON);
+ break;
+ case 2:
+ stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_OFF);
+ break;
+ case 3:
+ stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_ON);
+ break;
+ case 4:
+ stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_OFF);
+ break;
+ case 5:
+ case 6:
+ stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_ON);
+ break;
+ case 7:
+ case 8:
+ stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_OFF);
+ break;
+ case 9:
+ case 10:
+ case 11:
+ case 12:
+ case 13:
+ case 14:
+ case 15:
+ stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF,
+ STATUS_LED_OFF);
+ break;
+ default:
+ stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_ON);
+ break;
}
}
-
diff --git a/board/stamp/u-boot.lds b/board/stamp/u-boot.lds
index ad6886f..9a22e50 100644
--- a/board/stamp/u-boot.lds
+++ b/board/stamp/u-boot.lds
@@ -145,4 +145,3 @@
_end = . ;
PROVIDE (end = .);
}
-
diff --git a/common/soft_i2c.c b/common/soft_i2c.c
index 268da2c..48e3d3e 100644
--- a/common/soft_i2c.c
+++ b/common/soft_i2c.c
@@ -289,7 +289,7 @@
int rc;
/*
- * perform 1 byte write transaction with just address byte
+ * perform 1 byte write transaction with just address byte
* (fake write)
*/
send_start();
diff --git a/cpu/bf533/bf533_serial.h b/cpu/bf533/bf533_serial.h
index ec63a5e..d430e6c 100644
--- a/cpu/bf533/bf533_serial.h
+++ b/cpu/bf533/bf533_serial.h
@@ -3,7 +3,7 @@
*
* Copyright (c) 2005 blackfin.uclinux.org
*
- * This file is based on
+ * This file is based on
* bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver.
* Copyright (C) 2003 Bas Vermeulen <bas@buyways.nl>
* BuyWays B.V. (www.buyways.nl)
diff --git a/cpu/bf533/cache.S b/cpu/bf533/cache.S
index 1822d1f..8fac402 100644
--- a/cpu/bf533/cache.S
+++ b/cpu/bf533/cache.S
@@ -22,88 +22,88 @@
ENTRY(blackfin_dcache_flush_range)
R2 = -32;
- R2 = R0 & R2;
- P0 = R2;
- P1 = R1;
- CSYNC;
+ R2 = R0 & R2;
+ P0 = R2;
+ P1 = R1;
+ CSYNC;
1:
- FLUSH[P0++];
- CC = P0 < P1(iu);
- IF CC JUMP 1b(bp);
- FLUSH[P0];
- SSYNC;
- RTS;
+ FLUSH[P0++];
+ CC = P0 < P1(iu);
+ IF CC JUMP 1b(bp);
+ FLUSH[P0];
+ SSYNC;
+ RTS;
ENTRY(_icache_invalidate)
ENTRY(invalidate_entire_icache)
- [--SP] = ( R7:5);
-
- P0.L = (IMEM_CONTROL & 0xFFFF);
- P0.H = (IMEM_CONTROL >> 16);
- R7 = [P0];
-
- /* Clear the IMC bit , All valid bits in the instruction
- * cache are set to the invalid state
- */
- BITCLR(R7,IMC_P);
- CLI R6;
- SSYNC; /* SSYNC required before invalidating cache. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- /* Configures the instruction cache agian */
- R6 = (IMC | ENICPLB);
- R7 = R7 | R6;
-
- CLI R6;
- SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- ( R7:5) = [SP++];
- RTS;
+ [--SP] = ( R7:5);
+
+ P0.L = (IMEM_CONTROL & 0xFFFF);
+ P0.H = (IMEM_CONTROL >> 16);
+ R7 = [P0];
+
+ /* Clear the IMC bit , All valid bits in the instruction
+ * cache are set to the invalid state
+ */
+ BITCLR(R7,IMC_P);
+ CLI R6;
+ SSYNC; /* SSYNC required before invalidating cache. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ /* Configures the instruction cache agian */
+ R6 = (IMC | ENICPLB);
+ R7 = R7 | R6;
+
+ CLI R6;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ ( R7:5) = [SP++];
+ RTS;
/* Invalidate the Entire Data cache by
* clearing DMC[1:0] bits
*/
ENTRY(invalidate_entire_dcache)
ENTRY(_dcache_invalidate)
- [--SP] = ( R7:6);
-
- P0.L = (DMEM_CONTROL & 0xFFFF);
- P0.H = (DMEM_CONTROL >> 16);
- R7 = [P0];
-
- /* Clear the DMC[1:0] bits, All valid bits in the data
- * cache are set to the invalid state
- */
- BITCLR(R7,DMC0_P);
- BITCLR(R7,DMC1_P);
- CLI R6;
- SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- /* Configures the data cache again */
-
- R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
- R7 = R7 | R6;
-
- CLI R6;
- SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- ( R7:6) = [SP++];
- RTS;
+ [--SP] = ( R7:6);
+
+ P0.L = (DMEM_CONTROL & 0xFFFF);
+ P0.H = (DMEM_CONTROL >> 16);
+ R7 = [P0];
+
+ /* Clear the DMC[1:0] bits, All valid bits in the data
+ * cache are set to the invalid state
+ */
+ BITCLR(R7,DMC0_P);
+ BITCLR(R7,DMC1_P);
+ CLI R6;
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ /* Configures the data cache again */
+
+ R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0);
+ R7 = R7 | R6;
+
+ CLI R6;
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ ( R7:6) = [SP++];
+ RTS;
ENTRY(blackfin_dcache_invalidate_range)
R2 = -32;
diff --git a/cpu/bf533/cplbhdlr.S b/cpu/bf533/cplbhdlr.S
index b5abbbc..61be5bb 100644
--- a/cpu/bf533/cplbhdlr.S
+++ b/cpu/bf533/cplbhdlr.S
@@ -1,9 +1,9 @@
-/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
+/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved.
*
* This file is subject to the terms and conditions of the GNU General Public
- * License.
+ * License.
*
- * Blackfin BF533/2.6 support : LG Soft India
+ * Blackfin BF533/2.6 support : LG Soft India
*/
@@ -16,7 +16,7 @@
.text
-
+
.globl _cplb_hdr;
.type _cplb_hdr, STT_FUNC;
.extern _cplb_mgr;
@@ -76,19 +76,19 @@
#if ( defined (CONFIG_BLKFIN_CACHE) || defined (CONFIG_BLKFIN_DCACHE))
#if ( defined (CONFIG_BLKFIN_CACHE) && !defined (CONFIG_BLKFIN_DCACHE))
- R1 = CPLB_ENABLE_ICACHE;
+ R1 = CPLB_ENABLE_ICACHE;
#endif
#if ( !defined (CONFIG_BLKFIN_CACHE) && defined (CONFIG_BLKFIN_DCACHE))
- R1 = CPLB_ENABLE_DCACHE;
+ R1 = CPLB_ENABLE_DCACHE;
#endif
#if ( defined (CONFIG_BLKFIN_CACHE) && defined (CONFIG_BLKFIN_DCACHE))
- R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE;
+ R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE;
#endif
#else
R1 = 0;
#endif
- [--SP] = RETS;
+ [--SP] = RETS;
CALL _cplb_mgr;
RETS = [SP++];
CC = R0 == 0;
@@ -109,27 +109,27 @@
RTS;
unknown:
- [--SP] = RETS;
+ [--SP] = RETS;
CALL __unknown_exception_occurred;
RETS = [SP++];
JUMP unknown;
not_replaced:
CC = R0 == CPLB_NO_UNLOCKED;
IF !CC JUMP next_check;
- [--SP] = RETS;
+ [--SP] = RETS;
CALL __cplb_miss_all_locked;
RETS = [SP++];
next_check:
CC = R0 == CPLB_NO_ADDR_MATCH;
IF !CC JUMP next_check2;
- [--SP] = RETS;
+ [--SP] = RETS;
CALL __cplb_miss_without_replacement;
RETS = [SP++];
JUMP not_replaced;
next_check2:
CC = R0 == CPLB_PROT_VIOL;
IF !CC JUMP strange_return_from_cplb_mgr;
- [--SP] = RETS;
+ [--SP] = RETS;
CALL __cplb_protection_violation;
RETS = [SP++];
JUMP not_replaced;
@@ -139,8 +139,8 @@
JUMP strange_return_from_cplb_mgr;
/************************************
- * Diagnostic exception handlers
- */
+ * Diagnostic exception handlers
+ */
__cplb_miss_all_locked:
sp += -12;
@@ -174,11 +174,11 @@
* other kinds of exceptions, you must replace the
* default handler with your own, that handles all the
* exceptions you will use.
- *
+ *
* Since there's nothing we can do, we just loop here
* at what we hope is a suitably informative label.
*/
-
+
IDLE;
do_not_know_what_to_do:
CSYNC;
@@ -191,4 +191,3 @@
panic_bfin:
RTS;
-
diff --git a/cpu/bf533/cplbmgr.S b/cpu/bf533/cplbmgr.S
index fc3e3a8..7a0b048 100644
--- a/cpu/bf533/cplbmgr.S
+++ b/cpu/bf533/cplbmgr.S
@@ -3,7 +3,7 @@
*
* Blackfin BF533/2.6 support : LG Soft India
* Modification: Dec 07 2004
- * 1. Correction in icheck_lock. Valid lock entries were
+ * 1. Correction in icheck_lock. Valid lock entries were
* geting victimized, for instruction cplb replacement.
* 2. Setup loop's are modified as now toolchain support's P Indexed
* addressing
@@ -18,15 +18,15 @@
*
* Returns:
* CPLB_RELOADED => Successfully updated CPLB table.
- * CPLB_NO_UNLOCKED => All CPLBs are locked, so cannot be evicted.This indicates
- * that the CPLBs in the configuration tablei are badly
+ * CPLB_NO_UNLOCKED => All CPLBs are locked, so cannot be evicted.This indicates
+ * that the CPLBs in the configuration tablei are badly
* configured, as this should never occur.
- * CPLB_NO_ADDR_MATCH => The address being accessed, that triggered the exception,
- * is not covered by any of the CPLBs in the configuration
+ * CPLB_NO_ADDR_MATCH => The address being accessed, that triggered the exception,
+ * is not covered by any of the CPLBs in the configuration
* table. The application isi presumably misbehaving.
- * CPLB_PROT_VIOL => The address being accessed, that triggered thei exception,
- * was not a first-write to a clean Write Back Data page,
- * and so presumably is a genuine violation of the page's
+ * CPLB_PROT_VIOL => The address being accessed, that triggered thei exception,
+ * was not a first-write to a clean Write Back Data page,
+ * and so presumably is a genuine violation of the page's
* protection attributes. The application is misbehaving.
*/
#define ASSEMBLY
@@ -35,9 +35,9 @@
#include <asm-blackfin/blackfin.h>
#include <asm-blackfin/cplbtab.h>
#include <asm-blackfin/cplb.h>
-
+
.text
-
+
.align 2;
ENTRY(_cplb_mgr)
@@ -51,8 +51,8 @@
/* ICPLB Miss Exception. We need to choose one of the
* currently-installed CPLBs, and replace it with one
- * from the configuration table.
- */
+ * from the configuration table.
+ */
P4.L = (ICPLB_FAULT_ADDR & 0xFFFF);
P4.H = (ICPLB_FAULT_ADDR >> 16);
@@ -72,7 +72,7 @@
isearch:
R1 = [P0-0x100]; /* Address for this CPLB */
-
+
R0 = [P0++]; /* Info for this CPLB*/
CC = BITTST(R0,0); /* Is the CPLB valid?*/
IF !CC JUMP nomatch; /* Skip it, if not.*/
@@ -94,7 +94,7 @@
isearch_done:
I0 = R4; /* Fault address we'll search for*/
-
+
/* set up pointers */
P0.L = (ICPLB_DATA0 & 0xFFFF);
P0.H = (ICPLB_DATA0 >> 16);
@@ -138,7 +138,7 @@
P3.H = ipdt_swapcount_table;
P3 += -4;
icount:
- R2 = [P2]; /* address from config table */
+ R2 = [P2]; /* address from config table */
P2 += 8;
P3 += 8;
CC = R2==-1;
@@ -153,13 +153,13 @@
#endif
LC0=R3;
LSETUP(is_move,ie_move) LC0;
-is_move:
+is_move:
R0 = [P0];
[P0 - 4] = R0;
R0 = [P0 - 0x100];
- [P0-0x104] = R0;
+ [P0-0x104] = R0;
ie_move:P0+=4;
-
+
/* We've made space in the ICPLB table, so that ICPLB15
* is now free to be overwritten. Next, we have to determine
* which CPLB we need to install, from the configuration
@@ -167,8 +167,8 @@
* addresses and page-lengths from the config table, and
* determining whether the fault address falls within that
* range.
- */
-
+ */
+
P2.L = ipdt_table;
P2.H = ipdt_table;
#ifdef CONFIG_CPLB_INFO
@@ -190,7 +190,7 @@
*/
R1 = ((16<<8)|2);
-inext: R4 = [P2++]; /* address from config table */
+inext: R4 = [P2++]; /* address from config table */
R2 = [P2++]; /* data from config table */
#ifdef CONFIG_CPLB_INFO
P3 += 8;
@@ -201,7 +201,7 @@
/* See if failed address > start address */
CC = R4 <= R0(IU);
- IF !CC JUMP inext;
+ IF !CC JUMP inext;
/* extract page size (17:16)*/
R3 = EXTRACT(R2, R1.L) (Z);
@@ -250,17 +250,17 @@
/* FAILED CASES*/
no_page_in_table:
- ( R7:0,P5:0 ) = [SP++];
- R0 = CPLB_NO_ADDR_MATCH;
- RTS;
+ ( R7:0,P5:0 ) = [SP++];
+ R0 = CPLB_NO_ADDR_MATCH;
+ RTS;
all_locked:
- ( R7:0,P5:0 ) = [SP++];
- R0 = CPLB_NO_UNLOCKED;
- RTS;
+ ( R7:0,P5:0 ) = [SP++];
+ R0 = CPLB_NO_UNLOCKED;
+ RTS;
prot_violation:
- ( R7:0,P5:0 ) = [SP++];
- R0 = CPLB_PROT_VIOL;
- RTS;
+ ( R7:0,P5:0 ) = [SP++];
+ R0 = CPLB_PROT_VIOL;
+ RTS;
dcplb_write:
@@ -275,7 +275,7 @@
P4.H = (DCPLB_STATUS >> 16);
P3.L = (DCPLB_DATA0 & 0xFFFF);
P3.H = (DCPLB_DATA0 >> 16);
- R5 = [P4];
+ R5 = [P4];
/* A protection violation can be caused by more than just writes
* to a clean WB page, so we have to ensure that:
@@ -315,7 +315,7 @@
R2 <<= R5; /* if was super, check write in super mode*/
R2 = R3 & R2;
CC = R2 == 0;
- IF CC JUMP prot_violation;
+ IF CC JUMP prot_violation;
/* It's a genuine write-to-clean-page.*/
@@ -333,7 +333,7 @@
* config table, that covers the faulting address.
*/
- P1.L = (DCPLB_DATA15 & 0xFFFF);
+ P1.L = (DCPLB_DATA15 & 0xFFFF);
P1.H = (DCPLB_DATA15 >> 16);
P4.L = (DCPLB_FAULT_ADDR & 0xFFFF);
@@ -379,7 +379,7 @@
CC = R2 == 0; /* If none are set, it'll do.*/
IF !CC JUMP skip_stack_check;
- R2 = [P0 - 0x104]; /* R2 - PageStart */
+ R2 = [P0 - 0x104]; /* R2 - PageStart */
P3.L = page_size_table; /* retrive end address */
P3.H = page_size_table; /* retrive end address */
R3 = 0x2; /* 0th - position, 2 bits -length */
@@ -392,13 +392,13 @@
R7 = R7 << 0xA; /* in bytes * 1024*/
R7 = R2 + R7; /* R7 - PageEnd */
- R4 = SP; /* Test SP is in range */
+ R4 = SP; /* Test SP is in range */
CC = R7 < R4; /* if PageEnd < SP */
IF CC JUMP dfound_victim;
R3 = 0x284; /* stack length from start of trap till the point */
/* 20 stack locations for future modifications */
- R4 = R4 + R3;
+ R4 = R4 + R3;
CC = R4 < R2; /* if SP + stacklen < PageStart */
IF CC JUMP dfound_victim;
skip_stack_check:
@@ -409,7 +409,7 @@
/* If we got here, we didn't find a DCPLB we considered
* replacable, which means all of them were locked.
*/
-
+
JUMP all_locked;
dfound_victim:
@@ -450,14 +450,14 @@
CC = BITTST(R1, 7); /* Is it dirty?*/
IF !CC JUMP Ddoverwrite (BP); /* Nope.*/
CC = BITTST(R1, 14); /* Is it Write-Through?*/
- IF CC JUMP Ddoverwrite; /* Yep*/
+ IF CC JUMP Ddoverwrite; /* Yep*/
/* This is a dirty page, so we need to flush all writes
* that are pending on the page.
*/
/* Retrieve the page start address*/
- R0 = [P0 - 0x104];
+ R0 = [P0 - 0x104];
[--sp] = rets;
CALL dcplb_flush; /* R0==CPLB addr, R1==CPLB data*/
rets = [sp++];
@@ -467,7 +467,7 @@
* overwrite it by moving all the following CPLBs
* one space closer to the start.
*/
-
+
R1.L = ((DCPLB_DATA15+4) & 0xFFFF); /*DCPLB_DATA15+4*/
R1.H = ((DCPLB_DATA15+4) >> 16);
R0 = P0;
@@ -485,7 +485,7 @@
ds_move:
R0 = [P0++]; /* move data */
[P0 - 8] = R0;
- R0 = [P0-0x104] /* move address */
+ R0 = [P0-0x104] /* move address */
de_move: [P0-0x108] = R0;
/* We've now made space in DCPLB15 for the new CPLB to be
@@ -510,7 +510,7 @@
/* An extraction pattern, to retrieve bits 17:16.*/
R1 = (16<<8)|2;
-dnext: R4 = [P2++]; /* address */
+dnext: R4 = [P2++]; /* address */
R2 = [P2++]; /* data */
#ifdef CONFIG_CPLB_INFO
P3 += 8;
@@ -521,7 +521,7 @@
/* See if failed address > start address */
CC = R4 <= R0(IU);
- IF !CC JUMP dnext;
+ IF !CC JUMP dnext;
/* extract page size (17:16)*/
R3 = EXTRACT(R2, R1.L) (Z);
diff --git a/cpu/bf533/cpu.c b/cpu/bf533/cpu.c
index 2c139f5..78e2b96 100644
--- a/cpu/bf533/cpu.c
+++ b/cpu/bf533/cpu.c
@@ -41,7 +41,7 @@
#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID)
-#define ANOMALY_05000158 0x200
+#define ANOMALY_05000158 0x200
#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
@@ -68,7 +68,7 @@
};
static unsigned int dcplb_table[16][2]={
- {0xFFA00000,L1_DMEMORY},
+ {0xFFA00000,L1_DMEMORY},
{0x00000000,SDRAM_DKERNEL}, /*SDRAM_Page1*/
{0x00400000,SDRAM_DKERNEL}, /*SDRAM_Page1*/
{0x07C00000,SDRAM_DKERNEL}, /*SDRAM_Page15*/
@@ -83,13 +83,9 @@
{0x02800000,SDRAM_DGENERIC}, /*SDRAM_Page10*/
{0x02C00000,SDRAM_DGENERIC}, /*SDRAM_Page11*/
{0x03000000,SDRAM_DGENERIC}, /*SDRAM_Page12*/
- {0x20000000,SDRAM_EBIU}, /*For Network */
+ {0x20000000,SDRAM_EBIU}, /*For Network */
};
-
-
-
-
int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
__asm__ __volatile__
@@ -121,7 +117,7 @@
I0 = (unsigned int *)ICPLB_ADDR0;
I1 = (unsigned int *)ICPLB_DATA0;
-
+
for(i=0;i<16;i++){
*I0++ = icplb_table[i][0];
*I1++ = icplb_table[i][1];
@@ -166,13 +162,12 @@
*I1++ = dcplb_table[i][1];
}
cli();
- temp = *(unsigned int *)DMEM_CONTROL;
+ temp = *(unsigned int *)DMEM_CONTROL;
SSYNC();
*(unsigned int *)DMEM_CONTROL = ACACHE_BCACHE |ENDCPLB |PORT_PREF0|temp;
SSYNC();
sti();
}
-
void dcache_disable(void)
{
diff --git a/cpu/bf533/flush.S b/cpu/bf533/flush.S
index 1f9ec98..9fbdefc 100644
--- a/cpu/bf533/flush.S
+++ b/cpu/bf533/flush.S
@@ -60,7 +60,7 @@
[--SP] = LC1;
[--SP] = LT1;
[--SP] = LB1;
-
+
/* If it's a 1K or 4K page, then it's quickest to
* just systematically flush all the addresses in
* the page, regardless of whether they're in the
@@ -90,7 +90,7 @@
R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/
R3.H = R4.L << 0 ; /* Save in extraction pattern for later deposit.*/
-
+
/* So:
* R0 = Page start
* R1 = Page length (actually, offset into size/prefix tables)
@@ -101,7 +101,7 @@
* sub-bank, looking for dirty, valid tags that match our
* address prefix.
*/
-
+
P5.L = (ITEST_COMMAND & 0xFFFF);
P5.H = (ITEST_COMMAND >> 16);
P4.L = (ITEST_DATA0 & 0xFFFF);
@@ -119,7 +119,7 @@
* fetching tags, so we only have to set Set, Bank,
* Sub-bank and Way.
*/
-
+
P2 = 4;
LSETUP (ifs1, ife1) LC1 = P2;
ifs1: P0 = 32; /* iterate over all sets*/
@@ -142,7 +142,7 @@
IF !CC JUMP ifskip; /* Skip it if it doesn't match.*/
/* Tag address matches against page, so this is an entry
- * we must flush.
+ * we must flush.
*/
R7 >>= 10; /* Mask off the non-address bits*/
@@ -181,11 +181,11 @@
IFLUSH [P0++]; /* because CSYNC can't end loops.*/
LSETUP (isall, ieall) LC0 = P1;
isall:IFLUSH [P0++];
-ieall: NOP;
+ieall: NOP;
SSYNC;
JUMP ifinished;
-/* This is an external function being called by the user
+/* This is an external function being called by the user
* application through __flush_cache_all. Currently this function
* serves the purpose of flushing all the pending writes in
* in the data cache.
@@ -222,7 +222,7 @@
/* This is an internal function to flush all pending
* writes in the cache associated with a particular DCPLB.
- *
+ *
* R0 - page's start address
* R1 - CPLB's data field.
*/
@@ -236,7 +236,7 @@
[--SP] = LC1;
[--SP] = LT1;
[--SP] = LB1;
-
+
/* If it's a 1K or 4K page, then it's quickest to
* just systematically flush all the addresses in
* the page, regardless of whether they're in the
@@ -250,9 +250,9 @@
/* We're only interested in the page's size, so extract
* this from the CPLB (bits 17:16), and scale to give an
- * offset into the page_size and page_prefix tables.
+ * offset into the page_size and page_prefix tables.
*/
-
+
R1 <<= 14;
R1 >>= 30;
R1 <<= 2;
@@ -260,9 +260,9 @@
/* The page could be mapped into Bank A or Bank B, depending
* on (a) whether both banks are configured as cache, and
* (b) on whether address bit A[x] is set. x is determined
- * by DCBS in DMEM_CONTROL
+ * by DCBS in DMEM_CONTROL
*/
-
+
R2 = 0; /* Default to Bank A (Bank B would be 1)*/
P0.L = (DMEM_CONTROL & 0xFFFF);
@@ -303,7 +303,7 @@
* sub-bank, looking for dirty, valid tags that match our
* address prefix.
*/
-
+
P5.L = (DTEST_COMMAND & 0xFFFF);
P5.H = (DTEST_COMMAND >> 16);
P4.L = (DTEST_DATA0 & 0xFFFF);
@@ -322,7 +322,7 @@
* fetching tags, so we only have to set Set, Bank,
* Sub-bank and Way.
*/
-
+
P2 = 2;
LSETUP (fs1, fe1) LC1 = P2;
fs1: P0 = 64; /* iterate over all sets*/
diff --git a/cpu/bf533/interrupt.S b/cpu/bf533/interrupt.S
index b4d2579..e780dc6 100644
--- a/cpu/bf533/interrupt.S
+++ b/cpu/bf533/interrupt.S
@@ -240,7 +240,7 @@
sp += 12;
_evt_rst_exit:
- rtn;
+ rtn;
irq_panic:
r0 = IRQ_EVX;
@@ -279,7 +279,7 @@
evt_evt7_exit:
RESTORE_CONTEXT
- rti;
+ rti;
.global evt_evt8
evt_evt8:
diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c
index 8f0cd16..84ae9d9 100644
--- a/cpu/bf533/serial.c
+++ b/cpu/bf533/serial.c
@@ -13,12 +13,12 @@
* Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com>
* Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com>
* Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com>
- *
+ *
* Based on code from 68328 version serial driver imlpementation which was:
* Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu>
* Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
* Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org>
- * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
+ * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -178,9 +178,9 @@
save_and_cli(flags);
- /* Poll for TX Interruput */
- while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT));
- asm("csync;");
+ /* Poll for TX Interruput */
+ while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT));
+ asm("csync;");
*pUART_THR = ch; /* putc() */
diff --git a/cpu/bf533/start.S b/cpu/bf533/start.S
index 7414d88..6d58575 100644
--- a/cpu/bf533/start.S
+++ b/cpu/bf533/start.S
@@ -32,7 +32,7 @@
/*
* Note: A change in this file subsequently requires a change in
- * board/$(board_name)/config.mk for a valid u-boot.bin
+ * board/$(board_name)/config.mk for a valid u-boot.bin
*/
#define ASSEMBLY
@@ -82,7 +82,7 @@
SSYNC;
/* As per HW reference manual DAG registers,
- * DATA and Address resgister shall be zero'd
+ * DATA and Address resgister shall be zero'd
* in initialization, after a reset state
*/
r1 = 0; /* Data registers zero'd */
@@ -99,7 +99,7 @@
p3 = 0;
p4 = 0;
p5 = 0;
-
+
i0 = 0; /* DAG Registers zero'd */
i1 = 0;
i2 = 0;
@@ -242,9 +242,9 @@
r1 = [p1];
[p2] = r1;
p3=0x4;
- p1=p1+p3;
+ p1=p1+p3;
p2=p2+p3;
- r2=0x4;
+ r2=0x4;
r0=r0-r2;
cc=r0==0x0;
if !cc jump loop1;
diff --git a/examples/stubs.c b/examples/stubs.c
index 1797274..250a9af 100644
--- a/examples/stubs.c
+++ b/examples/stubs.c
@@ -131,7 +131,7 @@
* register
*/
#define EXPORT_FUNC(x) \
- asm volatile ( \
+ asm volatile ( \
" .globl " #x "\n" \
#x ":\n" \
" P0 = [P5 + %0]\n" \
diff --git a/include/asm-blackfin/cplbtab.h b/include/asm-blackfin/cplbtab.h
index dc6aee2..ab7d989 100644
--- a/include/asm-blackfin/cplbtab.h
+++ b/include/asm-blackfin/cplbtab.h
@@ -3,9 +3,9 @@
*
* Blackfin BF533/2.6 support : LG Soft India
* Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd
- * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's
+ * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's
* shouldn't be victimized. cplbmgr.S search logic is corrected
- * to findout the appropriate victim.
+ * to findout the appropriate victim.
* 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC
* : LG Soft India
*/
@@ -15,12 +15,12 @@
#define __ARCH_BFINNOMMU_CPLBTAB_H
/*************************************************************************
- * ICPLB TABLE
+ * ICPLB TABLE
*************************************************************************/
.data
-/* This table is configurable */
+/* This table is configurable */
.align 4;
@@ -33,7 +33,7 @@
/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
-#define ANOMALY_05000158 0x200
+#define ANOMALY_05000158 0x200
#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */
#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
@@ -45,14 +45,14 @@
#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
- #define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
+ #define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
#define SDRAM_EBIU (PAGE_SIZE_1MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
-#endif
+#endif
.global icplb_table
icplb_table:
.byte4 0xFFA00000;
-.byte4 (L1_IMEMORY);
+.byte4 (L1_IMEMORY);
.byte4 0x00000000;
.byte4 (SDRAM_IKERNEL); /*SDRAM_Page1*/
.byte4 0x00400000;
@@ -174,20 +174,20 @@
.byte4 0xffffffff; /* end of section - termination*/
/*********************************************************************
- * DCPLB TABLE
+ * DCPLB TABLE
********************************************************************/
.global dcplb_table
dcplb_table:
.byte4 0x00000000;
.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/
-.byte4 0x00400000;
+.byte4 0x00400000;
.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/
.byte4 0x07C00000;
.byte4 (SDRAM_DKERNEL); /*SDRAM_Page15*/
-.byte4 0x00800000;
+.byte4 0x00800000;
.byte4 (SDRAM_DGENERIC); /*SDRAM_Page2*/
-.byte4 0x00C00000;
+.byte4 0x00C00000;
.byte4 (SDRAM_DGENERIC); /*SDRAM_Page3*/
.byte4 0x01000000;
.byte4 (SDRAM_DGENERIC); /*SDRAM_Page4*/
@@ -197,7 +197,7 @@
.byte4 (SDRAM_DGENERIC); /*SDRAM_Page6*/
.byte4 0x01C00000;
.byte4 (SDRAM_DGENERIC); /*SDRAM_Page7*/
-#ifndef CONFIG_EZKIT
+#ifndef CONFIG_EZKIT
.byte4 0x02000000;
.byte4 (SDRAM_DGENERIC); /*SDRAM_Page8*/
.byte4 0x02400000;
@@ -217,7 +217,7 @@
/**********************************************************************
* PAGE DESCRIPTOR TABLE
- *
+ *
**********************************************************************/
/* Till here we are discussing about the static memory management model.
@@ -225,15 +225,15 @@
* descriptors to cover the entire addressable memory than will fit into
* the available on-chip 16 CPLB MMRs. When this happens, the below table
* will be used which will hold all the potentially required CPLB descriptors
- *
+ *
* This is how Page descriptor Table is implemented in uClinux/Blackfin.
- */
+ */
.global dpdt_table
dpdt_table:
#ifdef CONFIG_CPLB_INFO
.byte4 0x00000000;
.byte4 (SDRAM_DKERNEL); /*SDRAM_Page0*/
-.byte4 0x00400000;
+.byte4 0x00400000;
.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/
#endif
.byte4 0x00800000;
@@ -271,12 +271,12 @@
.byte4 (SDRAM_EBIU); /* Async Memory Bank 2 (Secnd)*/
.byte4 0x20100000;
.byte4 (SDRAM_EBIU); /* Async Memory Bank 1 (Prim B)*/
-.byte4 0x20000000;
+.byte4 0x20000000;
.byte4 (SDRAM_EBIU); /* Async Memory Bank 0 (Prim A)*/
.byte4 0x20300000; /*Fix for Network*/
.byte4 (SDRAM_EBIU); /*Async Memory bank 3*/
-#ifdef CONFIG_STAMP
+#ifdef CONFIG_STAMP
.byte4 0x04000000;
.byte4 (SDRAM_DGENERIC);
.byte4 0x04400000;
diff --git a/include/asm-blackfin/cpu/bf533_irq.h b/include/asm-blackfin/cpu/bf533_irq.h
index 902308a..9c5230d 100644
--- a/include/asm-blackfin/cpu/bf533_irq.h
+++ b/include/asm-blackfin/cpu/bf533_irq.h
@@ -81,7 +81,7 @@
/* The ABSTRACT IRQ definitions */
-/* The first seven of the following are fixed,
+/* The first seven of the following are fixed,
* the rest you change if you need to
*/
diff --git a/include/asm-blackfin/cpu/defBF532.h b/include/asm-blackfin/cpu/defBF532.h
index c30d5cd..26a5fe6 100644
--- a/include/asm-blackfin/cpu/defBF532.h
+++ b/include/asm-blackfin/cpu/defBF532.h
@@ -30,7 +30,7 @@
/* include all Core registers and bit definitions */
#include <asm/cpu/def_LPBlackfin.h>
-/* Helper macros
+/* Helper macros
* usage:
* P0.H = HI(UART_THR);
* P0.L = LO(UART_THR);
@@ -789,7 +789,7 @@
#define ERR_TYP_P0 0x0E
#define ERR_TYP_P1 0x0F
-/*
+/*
* PROGRAMMABLE FLAG MASKS
*/
diff --git a/include/asm-blackfin/cpu/def_LPBlackfin.h b/include/asm-blackfin/cpu/def_LPBlackfin.h
index 11a6504..9ac78c8 100644
--- a/include/asm-blackfin/cpu/def_LPBlackfin.h
+++ b/include/asm-blackfin/cpu/def_LPBlackfin.h
@@ -21,7 +21,7 @@
#ifndef _DEF_LPBLACKFIN_H
#define _DEF_LPBLACKFIN_H
-/*
+/*
* #if !defined(__ADSPLPBLACKFIN__)
* #warning def_LPBlackfin.h should only be included for 532 compatible chips.
* #endif
@@ -344,9 +344,9 @@
/* ** Masks */
#define ENDM 0x00000001 /* (doesn't really exist) Enable Data Memory L1 */
#define ENDCPLB 0x00000002 /* Enable DCPLB */
-#define ASRAM_BSRAM 0x00000000
+#define ASRAM_BSRAM 0x00000000
#define ACACHE_BSRAM 0x00000008
-#define ACACHE_BCACHE 0x0000000C
+#define ACACHE_BCACHE 0x0000000C
#define DCBS 0x00000010 /* L1 Data Cache Bank Select */
#define PORT_PREF0 0x00001000 /* DAG0 Port Preference */
#define PORT_PREF1 0x00002000 /* DAG1 Port Preference */
diff --git a/include/asm-blackfin/page_offset.h b/include/asm-blackfin/page_offset.h
index 45e34b5..262473f 100644
--- a/include/asm-blackfin/page_offset.h
+++ b/include/asm-blackfin/page_offset.h
@@ -22,7 +22,7 @@
* MA 02111-1307 USA
*/
-/*
+/*
* Changes made by Akbar Hussain April 10, 2001
*/
diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h
index 84b4b4e..8578166 100644
--- a/include/asm-blackfin/uaccess.h
+++ b/include/asm-blackfin/uaccess.h
@@ -3,7 +3,7 @@
*
* Copyright (c) 2005 blackfin.uclinux.org
*
- * This file is based on
+ * This file is based on
* Based on: include/asm-m68knommu/uaccess.h
* Changes made by Lineo Inc. May 2001
*
diff --git a/include/configs/ezkit533.h b/include/configs/ezkit533.h
index a52af4e..5eda673 100644
--- a/include/configs/ezkit533.h
+++ b/include/configs/ezkit533.h
@@ -9,111 +9,111 @@
#define CONFIG_DRIVER_SMC91111 1
#define CONFIG_SMC91111_BASE 0x20310300
#if 0
-#define CONFIG_MII
+#define CONFIG_MII
#define CFG_DISCOVER_PHY
#endif
#define CONFIG_RTC_BF533 1
#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */
-/* CONFIG_CLKIN_HZ is any value in Hz */
-#define CONFIG_CLKIN_HZ 27000000
-/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */
-/* 1=CLKIN/2 */
-#define CONFIG_CLKIN_HALF 0
-/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */
-/* 1=bypass PLL */
-#define CONFIG_PLL_BYPASS 0
-/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */
-/* Values can range from 1-64 */
+/* CONFIG_CLKIN_HZ is any value in Hz */
+#define CONFIG_CLKIN_HZ 27000000
+/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */
+/* 1=CLKIN/2 */
+#define CONFIG_CLKIN_HALF 0
+/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */
+/* 1=bypass PLL */
+#define CONFIG_PLL_BYPASS 0
+/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */
+/* Values can range from 1-64 */
#define CONFIG_VCO_MULT 22
-/* CONFIG_CCLK_DIV controls what the core clock divider is */
-/* Values can be 1, 2, 4, or 8 ONLY */
+/* CONFIG_CCLK_DIV controls what the core clock divider is */
+/* Values can be 1, 2, 4, or 8 ONLY */
#define CONFIG_CCLK_DIV 1
/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
-/* Values can range from 1-15 */
+/* Values can range from 1-15 */
#define CONFIG_SCLK_DIV 5
#if ( CONFIG_CLKIN_HALF == 0 )
-#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
+#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
#else
-#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
+#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
#endif
#if (CONFIG_PLL_BYPASS == 0)
-#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
-#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
+#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
+#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
#else
-#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
+#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
+#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
#endif
-#define CONFIG_MEM_SIZE 32 /* 128, 64, 32, 16 */
-#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */
-#define CONFIG_MEM_MT48LC16M16A2TG_75 1
+#define CONFIG_MEM_SIZE 32 /* 128, 64, 32, 16 */
+#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */
+#define CONFIG_MEM_MT48LC16M16A2TG_75 1
#define CONFIG_LOADS_ECHO 1
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_PING | \
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_JFFS2 | \
CFG_CMD_DATE)
-#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off"
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off"
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
-#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */
+#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
#define CFG_MEMTEST_END 0x01F00000 /* 1 ... 31 MB in DRAM */
-#define CFG_LOAD_ADDR 0x01000000 /* default load address */
-#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */
+#define CFG_LOAD_ADDR 0x01000000 /* default load address */
+#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_BASE 0x00000000
#define CFG_MAX_RAM_SIZE 0x02000000
#define CFG_FLASH_BASE 0x20000000
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
#define CFG_GBL_DATA_SIZE 0x4000
#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4)
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#define CFG_FLASH0_BASE 0x20000000
#define CFG_FLASH1_BASE 0x20200000
#define CFG_FLASH2_BASE 0x20280000
#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 40 /* max number of sectors on one chip */
-#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR 0x20020000
-#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */
/* JFFS Partition offset set */
#define CFG_JFFS2_FIRST_BANK 0
#define CFG_JFFS2_NUM_BANKS 1
/* 512k reserved for u-boot */
-#define CFG_JFFS2_FIRST_SECTOR 11
+#define CFG_JFFS2_FIRST_SECTOR 11
/*
* Stack sizes
*/
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#define POLL_MODE 1
#define FLASH_TOT_SECT 40
@@ -123,7 +123,7 @@
/*
* Initialize PSD4256 registers for using I2C
*/
-#define CONFIG_MISC_INIT_R
+#define CONFIG_MISC_INIT_R
/*
* I2C settings
@@ -144,7 +144,7 @@
*pFIO_FLAG_S = PF_SDA; \
asm("ssync;"); \
} \
- else { \
+ else { \
*pFIO_FLAG_C = PF_SDA; \
asm("ssync;"); \
}
@@ -152,7 +152,7 @@
*pFIO_FLAG_S = PF_SCL; \
asm("ssync;"); \
} \
- else { \
+ else { \
*pFIO_FLAG_C = PF_SCL; \
asm("ssync;"); \
}
@@ -166,15 +166,15 @@
#define __ADSPBF533__ 1
/* 0xFF, 0x7BB07BB0, 0x22547BB0 */
-/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
-#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \
- ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN)
-#define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \
- B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN)
+/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
+#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \
+ ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN)
+#define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \
+ B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN)
*/
-#define AMGCTLVAL 0xFF
-#define AMBCTL0VAL 0x7BB07BB0
-#define AMBCTL1VAL 0xFFC27BB0
+#define AMGCTLVAL 0xFF
+#define AMBCTL0VAL 0x7BB07BB0
+#define AMBCTL1VAL 0xFFC27BB0
#define CONFIG_VDSP 1
diff --git a/include/configs/stamp.h b/include/configs/stamp.h
index 1402a41..248ca70 100644
--- a/include/configs/stamp.h
+++ b/include/configs/stamp.h
@@ -17,7 +17,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -40,7 +40,7 @@
#define CONFIG_RTC_BF533 1
/* FLASH/ETHERNET uses the same address range */
-#define SHARED_RESOURCES 1
+#define SHARED_RESOURCES 1
#define CONFIG_VDSP 1
@@ -49,37 +49,37 @@
*
*/
-/* CONFIG_CLKIN_HZ is any value in Hz */
+/* CONFIG_CLKIN_HZ is any value in Hz */
#define CONFIG_CLKIN_HZ 11059200
-/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */
-/* 1=CLKIN/2 */
+/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */
+/* 1=CLKIN/2 */
#define CONFIG_CLKIN_HALF 0
-/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */
-/* 1=bypass PLL */
-#define CONFIG_PLL_BYPASS 0
-/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */
-/* Values can range from 1-64 */
+/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */
+/* 1=bypass PLL */
+#define CONFIG_PLL_BYPASS 0
+/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */
+/* Values can range from 1-64 */
#define CONFIG_VCO_MULT 45
-/* CONFIG_CCLK_DIV controls what the core clock divider is */
-/* Values can be 1, 2, 4, or 8 ONLY */
+/* CONFIG_CCLK_DIV controls what the core clock divider is */
+/* Values can be 1, 2, 4, or 8 ONLY */
#define CONFIG_CCLK_DIV 1
/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
-/* Values can range from 1-15 */
+/* Values can range from 1-15 */
#define CONFIG_SCLK_DIV 6
/*
* Network Settings
*/
/* network support */
-#define CONFIG_IPADDR 192.168.0.15
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_SERVERIP 192.168.0.2
-#define CONFIG_HOSTNAME STAMP
+#define CONFIG_IPADDR 192.168.0.15
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.2
+#define CONFIG_HOSTNAME STAMP
#define CONFIG_ROOTPATH /checkout/uClinux-dist/romfs
/* To remove hardcoding and enable MAC storage in EEPROM */
-/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */
+/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */
/*
* Command settings
@@ -90,17 +90,17 @@
#define CONFIG_BOOTDELAY 5
#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */
-#define CONFIG_BOOTCOMMAND "run ramboot"
+#define CONFIG_BOOTCOMMAND "run ramboot"
#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_PING | \
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_CACHE | \
- CFG_CMD_JFFS2 | \
+ CFG_CMD_JFFS2 | \
CFG_CMD_DATE)
-#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw"
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw"
#define CONFIG_EXTRA_ENV_SETTINGS \
"ramargs=setenv bootargs root=/dev/mtdblock0 rw\0" \
@@ -127,14 +127,14 @@
#define CONFIG_BAUDRATE 57600
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CFG_PROMPT "stamp>" /* Monitor Command Prompt */
+#define CFG_PROMPT "stamp>" /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_LOADS_ECHO 1
@@ -154,9 +154,9 @@
*
*/
-#define CFG_FLASH_CFI /* The flash is CFI compatible */
-#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CFG_FLASH_CFI_AMD_RESET
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CFG_FLASH_CFI_AMD_RESET
#define CFG_ENV_IS_IN_FLASH 1
@@ -165,8 +165,8 @@
#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
#define CFG_ENV_ADDR 0x20020000
-#define CFG_ENV_SIZE 0x10000
-#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x10000
+#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */
#define CFG_FLASH_ERASE_TOUT 30000 /* Timeout for Chip Erase (in ms) */
#define CFG_FLASH_ERASEBLOCK_TOUT 5000 /* Timeout for Block Erase (in ms) */
@@ -176,10 +176,10 @@
#define CFG_JFFS2_FIRST_BANK 0
#define CFG_JFFS2_NUM_BANKS 1
/* 512k reserved for u-boot */
-#define CFG_JFFS2_FIRST_SECTOR 11
+#define CFG_JFFS2_FIRST_SECTOR 11
-/*
- * following timeouts shall be used once the
+/*
+ * following timeouts shall be used once the
* Flash real protection is enabled
*/
#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
@@ -204,7 +204,7 @@
*pFIO_FLAG_S = PF_SDA; \
asm("ssync;"); \
} \
- else { \
+ else { \
*pFIO_FLAG_C = PF_SDA; \
asm("ssync;"); \
}
@@ -212,7 +212,7 @@
*pFIO_FLAG_S = PF_SCL; \
asm("ssync;"); \
} \
- else { \
+ else { \
*pFIO_FLAG_C = PF_SCL; \
asm("ssync;"); \
}
@@ -236,9 +236,9 @@
/*
* IDE/ATA stuff
*/
-#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
-#undef CONFIG_IDE_LED /* no led for ide supported */
-#undef CONFIG_IDE_RESET /* no reset for ide supported */
+#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
+#undef CONFIG_IDE_LED /* no led for ide supported */
+#undef CONFIG_IDE_RESET /* no reset for ide supported */
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */
#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
@@ -246,9 +246,9 @@
#define CFG_ATA_BASE_ADDR 0x20200000
#define CFG_ATA_IDE0_OFFSET 0x0000
-#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET 0x0007 /* Offset for alternate registers */
+#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */
+#define CFG_ATA_ALT_OFFSET 0x0007 /* Offset for alternate registers */
#define CFG_ATA_STRIDE 2
#endif
@@ -258,23 +258,20 @@
*
*/
-#define CONFIG_MEM_SIZE 128 /* 128, 64, 32, 16 */
-#define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */
+#define CONFIG_MEM_SIZE 128 /* 128, 64, 32, 16 */
+#define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */
#define CONFIG_MEM_MT48LC64M4A2FB_7E 1
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
#define CFG_MEMTEST_END 0x07EFFFFF /* 1 ... 127 MB in DRAM */
-#define CFG_LOAD_ADDR 0x01000000 /* default load address */
+#define CFG_LOAD_ADDR 0x01000000 /* default load address */
-#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_BASE 0x00000000
#define CFG_MAX_RAM_SIZE 0x08000000
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)
-
-
-
#if ( CONFIG_CLKIN_HALF == 0 )
#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
#else
@@ -289,14 +286,12 @@
#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
#endif
-
-
/*
* Miscellaneous configurable options
*/
-#define CFG_HZ 1000 /* 1ms time tick */
+#define CFG_HZ 1000 /* 1ms time tick */
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
#define CFG_GBL_DATA_SIZE 0x4000
#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
@@ -309,25 +304,24 @@
/*
* Stack sizes
*/
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
/*
* FLASH organization and environment definitions
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/* 0xFF, 0xBBC3BBc3, 0x99B39983 */
-/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
-#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \
- B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN)
-#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \
- B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN)
+/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
+#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \
+ B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN)
+#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \
+ B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN)
*/
-#define AMGCTLVAL 0xFF
-#define AMBCTL0VAL 0xBBC3BBC3
-#define AMBCTL1VAL 0x99B39983
-#define CF_AMBCTL1VAL 0x99B3ffc2
+#define AMGCTLVAL 0xFF
+#define AMBCTL0VAL 0xBBC3BBC3
+#define AMBCTL1VAL 0x99B39983
+#define CF_AMBCTL1VAL 0x99B3ffc2
#ifdef CONFIG_VDSP
#define ET_EXEC_VDSP 0x8
@@ -336,5 +330,4 @@
#define VDSP_ENTRY_ADDR 0xFFA00000
#endif
-
#endif
diff --git a/lib_blackfin/bf533_linux.c b/lib_blackfin/bf533_linux.c
index 6f29795..88b4da2 100644
--- a/lib_blackfin/bf533_linux.c
+++ b/lib_blackfin/bf533_linux.c
@@ -46,7 +46,7 @@
#define CMD_LINE_ADDR 0xFF900000 /* L1 scratchpad */
#ifdef SHARED_RESOURCES
- extern void swap_to(int device_id);
+ extern void swap_to(int device_id);
#endif
static char *make_command_line(void);
diff --git a/lib_blackfin/bf533_string.c b/lib_blackfin/bf533_string.c
index cfa515a..c8b1a3a 100644
--- a/lib_blackfin/bf533_string.c
+++ b/lib_blackfin/bf533_string.c
@@ -127,7 +127,7 @@
void * memcpy(void * dest,const void *src,size_t count)
{
char *tmp = (char *) dest, *s = (char *) src;
-
+
/* Turn off the cache, if destination in the L1 memory */
if ( (tmp >= (char *)L1_ISRAM) && (tmp < (char *)L1_ISRAM_END)
|| (tmp >= (char *)DATA_BANKA_SRAM) && (tmp < DATA_BANKA_SRAM_END)
@@ -150,7 +150,7 @@
void *dma_memcpy(void * dest,const void *src,size_t count)
{
-
+
*pMDMA_D0_IRQ_STATUS = DMA_DONE | DMA_ERR;
/* Copy sram functions from sdram to sram */
@@ -173,7 +173,7 @@
asm("ssync;");
*pMDMA_D0_CONFIG = ( WNR | DMAEN);
-
+
while(*pMDMA_D0_IRQ_STATUS & DMA_RUN){
*pMDMA_D0_IRQ_STATUS |= (DMA_DONE | DMA_ERR);
}
diff --git a/lib_blackfin/blackfin_board.h b/lib_blackfin/blackfin_board.h
index 35a513f..31c16a2 100644
--- a/lib_blackfin/blackfin_board.h
+++ b/lib_blackfin/blackfin_board.h
@@ -38,7 +38,7 @@
ulong monitor_flash_len;
-#define VERSION_STRING_SIZE 150 /* including 40 bytes buffer to change any string */
+#define VERSION_STRING_SIZE 150 /* including 40 bytes buffer to change any string */
#define VERSION_STRING_FORMAT "%s (%s - %s)\n"
#define VERSION_STRING U_BOOT_VERSION, __DATE__, __TIME__
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index 7bf63eb..55d13fa 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -147,7 +147,7 @@
addr = (CFG_GBL_DATA_ADDR + sizeof(gd_t));
/* Align to 4 byte boundary */
- addr &= ~(4 - 1);
+ addr &= ~(4 - 1);
bd = (bd_t*)addr;
gd->bd = bd;
memset((void *) bd, 0, sizeof(bd_t));
diff --git a/lib_blackfin/cache.c b/lib_blackfin/cache.c
index 4213b86..847278d 100644
--- a/lib_blackfin/cache.c
+++ b/lib_blackfin/cache.c
@@ -26,16 +26,15 @@
*/
/* for now: just dummy functions to satisfy the linker */
-extern void blackfin_icache_range(unsigned long *,unsigned long *);
-extern void blackfin_dcache_range(unsigned long *,unsigned long *);
-void flush_cache(unsigned long dummy1, unsigned long dummy2)
+extern void blackfin_icache_range (unsigned long *, unsigned long *);
+extern void blackfin_dcache_range (unsigned long *, unsigned long *);
+void flush_cache (unsigned long dummy1, unsigned long dummy2)
{
- if(icache_status()){
- blackfin_icache_flush_range(dummy1,dummy1+dummy2);
- }
- if(dcache_status()){
- blackfin_dcache_flush_range(dummy1,dummy1+dummy2);
- }
+ if (icache_status ()) {
+ blackfin_icache_flush_range (dummy1, dummy1 + dummy2);
+ }
+ if (dcache_status ()) {
+ blackfin_dcache_flush_range (dummy1, dummy1 + dummy2);
+ }
return;
}
-
diff --git a/lib_blackfin/muldi3.c b/lib_blackfin/muldi3.c
index a562242..1fc34e3 100644
--- a/lib_blackfin/muldi3.c
+++ b/lib_blackfin/muldi3.c
@@ -80,13 +80,13 @@
{
DIunion w;
DIunion uu, vv;
-
+
uu.ll = u,
vv.ll = v;
/* panic("kernel panic for __muldi3"); */
w.ll = __umulsidi3 (uu.s.low, vv.s.low);
w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
+ (USItype) uu.s.high * (USItype) vv.s.low);
-
+
return w.ll;
}
diff --git a/rtc/bf533_rtc.c b/rtc/bf533_rtc.c
index 09b8f21..948be64 100644
--- a/rtc/bf533_rtc.c
+++ b/rtc/bf533_rtc.c
@@ -19,7 +19,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- * Real Time Clock interface of ADI21535 (Blackfin) for uCLinux
+ * Real Time Clock interface of ADI21535 (Blackfin) for uCLinux
*
* Copyright (C) 2003 Motorola Corporation. All rights reserved.
* Richard Xiao (A2590C@email.mot.com)
@@ -42,7 +42,7 @@
* 1.10b Andrew Morton: SMP lock fix
* 1.10c Cesar Barros: SMP locking fixes and cleanup
* 1.10d Paul Gortmaker: delete paranoia check in rtc_exit
- * 1.10e LG Soft India: Register access is different in BF533.
+ * 1.10e LG Soft India: Register access is different in BF533.
*/
#include <common.h>
@@ -54,62 +54,64 @@
#include <asm/blackfin.h>
#include <asm/cpu/bf533_rtc.h>
-void rtc_reset(void)
+void rtc_reset (void)
{
return; /* nothing to do */
}
/* Wait for pending writes to complete */
-void wait_for_complete(void)
+void wait_for_complete (void)
{
while (!(*(volatile unsigned short *) RTC_ISTAT & 0x8000)) {
- printf("");
+ printf ("");
}
*(volatile unsigned short *) RTC_ISTAT = 0x8000;
}
/* Enable the RTC prescaler enable register */
-void rtc_init()
+void rtc_init ()
{
*(volatile unsigned short *) RTC_PREN = 0x1;
- wait_for_complete();
+ wait_for_complete ();
}
-/* Set the time. Get the time_in_secs which is the number of seconds since Jan 1970 and set the RTC registers
+/* Set the time. Get the time_in_secs which is the number of seconds since Jan 1970 and set the RTC registers
* based on this value.
*/
void rtc_set (struct rtc_time *tmp)
{
unsigned long n_days_1970 = 0;
- unsigned long n_secs_rem = 0;
- unsigned long n_hrs = 0;
- unsigned long n_mins = 0;
- unsigned long n_secs = 0;
+ unsigned long n_secs_rem = 0;
+ unsigned long n_hrs = 0;
+ unsigned long n_mins = 0;
+ unsigned long n_secs = 0;
unsigned long time_in_secs;
- if(tmp == NULL) {
- printf("Error setting the date/time \n");
+ if (tmp == NULL) {
+ printf ("Error setting the date/time \n");
return;
}
- time_in_secs = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday,tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+ time_in_secs =
+ mktime (tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_hour,
+ tmp->tm_min, tmp->tm_sec);
/* Compute no. of days since 1970 */
n_days_1970 = (unsigned long) (time_in_secs / (NUM_SECS_IN_DAY));
/* From the remining secs, compute the hrs(0-23), mins(0-59) and secs(0-59) */
- n_secs_rem = (unsigned long)(time_in_secs % (NUM_SECS_IN_DAY));
- n_hrs = n_secs_rem / (NUM_SECS_IN_HOUR);
+ n_secs_rem = (unsigned long) (time_in_secs % (NUM_SECS_IN_DAY));
+ n_hrs = n_secs_rem / (NUM_SECS_IN_HOUR);
n_secs_rem = n_secs_rem % (NUM_SECS_IN_HOUR);
n_mins = n_secs_rem / (NUM_SECS_IN_MIN);
n_secs = n_secs_rem % (NUM_SECS_IN_MIN);
-
+
/* Store the new time in the RTC_STAT register */
*(volatile unsigned long *) RTC_STAT =
((n_days_1970 << DAY_BITS_OFF) | (n_hrs << HOUR_BITS_OFF) |
- (n_mins << MIN_BITS_OFF) | (n_secs << SEC_BITS_OFF));
+ (n_mins << MIN_BITS_OFF) | (n_secs << SEC_BITS_OFF));
- wait_for_complete();
+ wait_for_complete ();
}
/* Read the time from the RTC_STAT. time_in_seconds is seconds since Jan 1970 */
@@ -117,16 +119,16 @@
{
unsigned long cur_rtc_stat = 0;
unsigned long time_in_sec;
- unsigned long tm_sec = 0, tm_min = 0, tm_hour = 0, tm_day = 0;
+ unsigned long tm_sec = 0, tm_min = 0, tm_hour = 0, tm_day = 0;
- if(tmp == NULL) {
- printf("Error getting the date/time \n");
+ if (tmp == NULL) {
+ printf ("Error getting the date/time \n");
return;
}
/* Read the RTC_STAT register */
cur_rtc_stat = *(volatile unsigned long *) RTC_STAT;
-
+
/* Get the secs (0-59), mins (0-59), hrs (0-23) and the days since Jan 1970 */
tm_sec = (cur_rtc_stat >> SEC_BITS_OFF) & 0x3f;
tm_min = (cur_rtc_stat >> MIN_BITS_OFF) & 0x3f;
@@ -134,10 +136,10 @@
tm_day = (cur_rtc_stat >> DAY_BITS_OFF) & 0x7fff;
/* Calculate the total number of seconds since Jan 1970 */
- time_in_sec = (tm_sec) +
- MIN_TO_SECS(tm_min) +
- HRS_TO_SECS(tm_hour) +
- DAYS_TO_SECS(tm_day);
- to_tm(time_in_sec,tmp);
+ time_in_sec = (tm_sec) +
+ MIN_TO_SECS (tm_min) +
+ HRS_TO_SECS (tm_hour) +
+ DAYS_TO_SECS (tm_day);
+ to_tm (time_in_sec, tmp);
}
-#endif /* CONFIG_RTC_BF533 && CFG_CMD_DATE */
+#endif /* CONFIG_RTC_BF533 && CFG_CMD_DATE */