sh: add support for sh7757lcr board
The R0P7757LC0030RL board has SH7757, 256MB DDR3-SDRAM, SPI ROM,
Ethernet, and more.
This patch supports the following functions:
- 256MB DDR3-SDRAM
- SPI ROM
- Ethernet
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/board/renesas/sh7757lcr/spi-boot.c b/board/renesas/sh7757lcr/spi-boot.c
new file mode 100644
index 0000000..823844e
--- /dev/null
+++ b/board/renesas/sh7757lcr/spi-boot.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License. See the file "COPYING.LIB" in the main
+ * directory of this archive for more details.
+ */
+
+#include <common.h>
+
+#define CONFIG_RAM_BOOT_PHYS 0x4ef80000
+#if defined(CONFIG_SH7757_OFFSET_SPI)
+#define CONFIG_SPI_ADDR 0x00010000
+#else
+#define CONFIG_SPI_ADDR 0x00000000
+#endif
+#define CONFIG_SPI_LENGTH 0x00030000
+#define CONFIG_RAM_BOOT 0x8ef80000
+
+#define SPIWDMADR 0xFE001018
+#define SPIWDMCNTR 0xFE001020
+#define SPIDMCOR 0xFE001028
+#define SPIDMINTSR 0xFE001188
+#define SPIDMINTMR 0xFE001190
+
+#define SPIDMINTSR_DMEND 0x00000004
+
+#define TBR 0xFE002000
+#define RBR 0xFE002000
+
+#define CR1 0xFE002008
+#define CR2 0xFE002010
+#define CR3 0xFE002018
+#define CR4 0xFE002020
+
+/* CR1 */
+#define SPI_TBE 0x80
+#define SPI_TBF 0x40
+#define SPI_RBE 0x20
+#define SPI_RBF 0x10
+#define SPI_PFONRD 0x08
+#define SPI_SSDB 0x04
+#define SPI_SSD 0x02
+#define SPI_SSA 0x01
+
+/* CR2 */
+#define SPI_RSTF 0x80
+#define SPI_LOOPBK 0x40
+#define SPI_CPOL 0x20
+#define SPI_CPHA 0x10
+#define SPI_L1M0 0x08
+
+/* CR4 */
+#define SPI_TBEI 0x80
+#define SPI_TBFI 0x40
+#define SPI_RBEI 0x20
+#define SPI_RBFI 0x10
+#define SPI_SSS 0x01
+
+#define spi_write(val, addr) (*(volatile unsigned long *)(addr)) = val
+#define spi_read(addr) (*(volatile unsigned long *)(addr))
+
+/* M25P80 */
+#define M25_READ 0x03
+
+#define __uses_spiboot2 __attribute__((section(".spiboot2.text")))
+static void __uses_spiboot2 spi_reset(void)
+{
+ spi_write(0xfe, CR1);
+
+ spi_write(0, SPIDMCOR);
+ spi_write(0x00, CR1);
+
+ spi_write(spi_read(CR2) | SPI_RSTF, CR2); /* fifo reset */
+ spi_write(spi_read(CR2) & ~SPI_RSTF, CR2);
+}
+
+static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr,
+ unsigned long len)
+{
+ spi_write(M25_READ, TBR);
+ spi_write((addr >> 16) & 0xFF, TBR);
+ spi_write((addr >> 8) & 0xFF, TBR);
+ spi_write(addr & 0xFF, TBR);
+
+ spi_write(SPIDMINTSR_DMEND, SPIDMINTSR);
+ spi_write((unsigned long)buf, SPIWDMADR);
+ spi_write(len & 0xFFFFFFE0, SPIWDMCNTR);
+ spi_write(1, SPIDMCOR);
+
+ spi_write(0xff, CR3);
+ spi_write(spi_read(CR1) | SPI_SSDB, CR1);
+ spi_write(spi_read(CR1) | SPI_SSA, CR1);
+
+ while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND))
+ ;
+}
+
+void __uses_spiboot2 spiboot_main(void)
+{
+ void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE;
+
+ spi_reset();
+ spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR,
+ CONFIG_SPI_LENGTH);
+
+ _start();
+}
+