miiphy: convert to linux/mii.h
The include/miiphy.h header duplicates a lot of things from linux/mii.h.
So punt all the things that overlap to keep the API simple and to make
merging between U-Boot and Linux simpler.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 2f923f2..3f5eeb7 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -318,19 +318,19 @@
u16 ctrl, oldctrl;
do {
- eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
- oldctrl = ctrl & PHY_BMCR_AUTON;
+ eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
+ oldctrl = ctrl & BMCR_ANENABLE;
- ctrl ^= PHY_BMCR_AUTON;
- eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
- eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
- ctrl &= PHY_BMCR_AUTON;
+ ctrl ^= BMCR_ANENABLE;
+ eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
+ eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
+ ctrl &= BMCR_ANENABLE;
if (ctrl == oldctrl) {
phy_addr++;
} else {
- ctrl ^= PHY_BMCR_AUTON;
- eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
+ ctrl ^= BMCR_ANENABLE;
+ eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
return phy_addr;
}
@@ -347,10 +347,10 @@
int timeout = CONFIG_PHYRESET_TIMEOUT;
u32 phy_addr = priv->address;
- eth_mdio_write(dev, phy_addr, PHY_BMCR, PHY_BMCR_RESET);
+ eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET);
do {
- eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
- if (!(ctrl & PHY_BMCR_RESET))
+ eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
+ if (!(ctrl & BMCR_RESET))
break;
udelay(1000);
} while (timeout--);
@@ -386,33 +386,33 @@
return -1;
#if defined(CONFIG_DW_AUTONEG)
- bmcr = PHY_BMCR_AUTON | PHY_BMCR_RST_NEG | PHY_BMCR_100MB | \
- PHY_BMCR_DPLX | PHY_BMCR_1000_MBPS;
+ bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_SPEED100 | \
+ BMCR_FULLDPLX | BMCR_SPEED1000;
#else
- bmcr = PHY_BMCR_100MB | PHY_BMCR_DPLX;
+ bmcr = BMCR_SPEED100 | BMCR_FULLDPLX;
#if defined(CONFIG_DW_SPEED10M)
- bmcr &= ~PHY_BMCR_100MB;
+ bmcr &= ~BMCR_SPEED100;
#endif
#if defined(CONFIG_DW_DUPLEXHALF)
- bmcr &= ~PHY_BMCR_DPLX;
+ bmcr &= ~BMCR_FULLDPLX;
#endif
#endif
- if (eth_mdio_write(dev, phy_addr, PHY_BMCR, bmcr) < 0)
+ if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0)
return -1;
/* Read the phy status register and populate priv structure */
#if defined(CONFIG_DW_AUTONEG)
timeout = CONFIG_AUTONEG_TIMEOUT;
do {
- eth_mdio_read(dev, phy_addr, PHY_BMSR, &bmsr);
- if (bmsr & PHY_BMSR_AUTN_COMP)
+ eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr);
+ if (bmsr & BMSR_ANEGCOMPLETE)
break;
udelay(1000);
} while (timeout--);
- eth_mdio_read(dev, phy_addr, PHY_ANLPAR, &anlpar);
- eth_mdio_read(dev, phy_addr, PHY_1000BTSR, &btsr);
+ eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar);
+ eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr);
if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
priv->speed = SPEED_1000M;
@@ -421,28 +421,28 @@
else
priv->duplex = HALF_DUPLEX;
} else {
- if (anlpar & PHY_ANLPAR_100)
+ if (anlpar & LPA_100)
priv->speed = SPEED_100M;
else
priv->speed = SPEED_10M;
- if (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
+ if (anlpar & (LPA_10FULL | LPA_100FULL))
priv->duplex = FULL_DUPLEX;
else
priv->duplex = HALF_DUPLEX;
}
#else
- if (eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl) < 0)
+ if (eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl) < 0)
return -1;
- if (ctrl & PHY_BMCR_DPLX)
+ if (ctrl & BMCR_FULLDPLX)
priv->duplex = FULL_DUPLEX;
else
priv->duplex = HALF_DUPLEX;
- if (ctrl & PHY_BMCR_1000_MBPS)
+ if (ctrl & BMCR_SPEED1000)
priv->speed = SPEED_1000M;
- else if (ctrl & PHY_BMCR_100_MBPS)
+ else if (ctrl & BMCR_SPEED100)
priv->speed = SPEED_100M;
else
priv->speed = SPEED_10M;