riscv: assembler versions of memcpy, memmove, memset
Provide optimized versions of memcpy(), memmove(), memset() copied from
the Linux kernel.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
diff --git a/arch/riscv/lib/memset.S b/arch/riscv/lib/memset.S
new file mode 100644
index 0000000..34c5360
--- /dev/null
+++ b/arch/riscv/lib/memset.S
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 Regents of the University of California
+ */
+
+
+#include <linux/linkage.h>
+#include <asm/asm.h>
+
+/* void *memset(void *, int, size_t) */
+ENTRY(__memset)
+WEAK(memset)
+ move t0, a0 /* Preserve return value */
+
+ /* Defer to byte-oriented fill for small sizes */
+ sltiu a3, a2, 16
+ bnez a3, 4f
+
+ /*
+ * Round to nearest XLEN-aligned address
+ * greater than or equal to start address
+ */
+ addi a3, t0, SZREG-1
+ andi a3, a3, ~(SZREG-1)
+ beq a3, t0, 2f /* Skip if already aligned */
+ /* Handle initial misalignment */
+ sub a4, a3, t0
+1:
+ sb a1, 0(t0)
+ addi t0, t0, 1
+ bltu t0, a3, 1b
+ sub a2, a2, a4 /* Update count */
+
+2: /* Duff's device with 32 XLEN stores per iteration */
+ /* Broadcast value into all bytes */
+ andi a1, a1, 0xff
+ slli a3, a1, 8
+ or a1, a3, a1
+ slli a3, a1, 16
+ or a1, a3, a1
+#ifdef CONFIG_64BIT
+ slli a3, a1, 32
+ or a1, a3, a1
+#endif
+
+ /* Calculate end address */
+ andi a4, a2, ~(SZREG-1)
+ add a3, t0, a4
+
+ andi a4, a4, 31*SZREG /* Calculate remainder */
+ beqz a4, 3f /* Shortcut if no remainder */
+ neg a4, a4
+ addi a4, a4, 32*SZREG /* Calculate initial offset */
+
+ /* Adjust start address with offset */
+ sub t0, t0, a4
+
+ /* Jump into loop body */
+ /* Assumes 32-bit instruction lengths */
+ la a5, 3f
+#ifdef CONFIG_64BIT
+ srli a4, a4, 1
+#endif
+ add a5, a5, a4
+ jr a5
+3:
+ REG_S a1, 0(t0)
+ REG_S a1, SZREG(t0)
+ REG_S a1, 2*SZREG(t0)
+ REG_S a1, 3*SZREG(t0)
+ REG_S a1, 4*SZREG(t0)
+ REG_S a1, 5*SZREG(t0)
+ REG_S a1, 6*SZREG(t0)
+ REG_S a1, 7*SZREG(t0)
+ REG_S a1, 8*SZREG(t0)
+ REG_S a1, 9*SZREG(t0)
+ REG_S a1, 10*SZREG(t0)
+ REG_S a1, 11*SZREG(t0)
+ REG_S a1, 12*SZREG(t0)
+ REG_S a1, 13*SZREG(t0)
+ REG_S a1, 14*SZREG(t0)
+ REG_S a1, 15*SZREG(t0)
+ REG_S a1, 16*SZREG(t0)
+ REG_S a1, 17*SZREG(t0)
+ REG_S a1, 18*SZREG(t0)
+ REG_S a1, 19*SZREG(t0)
+ REG_S a1, 20*SZREG(t0)
+ REG_S a1, 21*SZREG(t0)
+ REG_S a1, 22*SZREG(t0)
+ REG_S a1, 23*SZREG(t0)
+ REG_S a1, 24*SZREG(t0)
+ REG_S a1, 25*SZREG(t0)
+ REG_S a1, 26*SZREG(t0)
+ REG_S a1, 27*SZREG(t0)
+ REG_S a1, 28*SZREG(t0)
+ REG_S a1, 29*SZREG(t0)
+ REG_S a1, 30*SZREG(t0)
+ REG_S a1, 31*SZREG(t0)
+ addi t0, t0, 32*SZREG
+ bltu t0, a3, 3b
+ andi a2, a2, SZREG-1 /* Update count */
+
+4:
+ /* Handle trailing misalignment */
+ beqz a2, 6f
+ add a3, t0, a2
+5:
+ sb a1, 0(t0)
+ addi t0, t0, 1
+ bltu t0, a3, 5b
+6:
+ ret
+END(__memset)