tegra: spi: add fdt support to tegra SPI SFLASH driver
Add support for configuring tegra SPI driver from devicetree.
Support is keyed off CONFIG_OF_CONTROL. Add entry in seaboard dts
file for spi controller to describe seaboard spi.
Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/drivers/spi/tegra_spi.c b/drivers/spi/tegra_spi.c
index 9bb34e2..ce19095 100644
--- a/drivers/spi/tegra_spi.c
+++ b/drivers/spi/tegra_spi.c
@@ -32,6 +32,9 @@
#include <asm/arch-tegra/clk_rst.h>
#include <asm/arch-tegra/tegra_spi.h>
#include <spi.h>
+#include <fdtdec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_SPI_CORRUPTS_UART)
#define corrupt_delay() udelay(CONFIG_SPI_CORRUPTS_UART_DLY);
@@ -44,6 +47,7 @@
struct spi_tegra *regs;
unsigned int freq;
unsigned int mode;
+ int periph_id;
};
static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave)
@@ -84,8 +88,45 @@
}
spi->slave.bus = bus;
spi->slave.cs = cs;
- spi->freq = max_hz;
+#ifdef CONFIG_OF_CONTROL
+ int node = fdtdec_next_compatible(gd->fdt_blob, 0,
+ COMPAT_NVIDIA_TEGRA20_SFLASH);
+ if (node < 0) {
+ debug("%s: cannot locate sflash node\n", __func__);
+ return NULL;
+ }
+ if (!fdtdec_get_is_enabled(gd->fdt_blob, node)) {
+ debug("%s: sflash is disabled\n", __func__);
+ return NULL;
+ }
+ spi->regs = (struct spi_tegra *)fdtdec_get_addr(gd->fdt_blob,
+ node, "reg");
+ if ((fdt_addr_t)spi->regs == FDT_ADDR_T_NONE) {
+ debug("%s: no sflash register found\n", __func__);
+ return NULL;
+ }
+ spi->freq = fdtdec_get_int(gd->fdt_blob, node, "spi-max-frequency", 0);
+ if (!spi->freq) {
+ debug("%s: no sflash max frequency found\n", __func__);
+ return NULL;
+ }
+ spi->periph_id = clock_decode_periph_id(gd->fdt_blob, node);
+ if (spi->periph_id == PERIPH_ID_NONE) {
+ debug("%s: could not decode periph id\n", __func__);
+ return NULL;
+ }
+#else
spi->regs = (struct spi_tegra *)NV_PA_SPI_BASE;
+ spi->freq = TEGRA_SPI_MAX_FREQ;
+ spi->periph_id = PERIPH_ID_SPI1;
+#endif
+ if (max_hz < spi->freq) {
+ debug("%s: limiting frequency from %u to %u\n", __func__,
+ spi->freq, max_hz);
+ spi->freq = max_hz;
+ }
+ debug("%s: controller initialized at %p, freq = %u, periph_id = %d\n",
+ __func__, spi->regs, spi->freq, spi->periph_id);
spi->mode = mode;
return &spi->slave;
@@ -110,7 +151,7 @@
u32 reg;
/* Change SPI clock to correct frequency, PLLP_OUT0 source */
- clock_start_periph_pll(PERIPH_ID_SPI1, CLOCK_ID_PERIPH, spi->freq);
+ clock_start_periph_pll(spi->periph_id, CLOCK_ID_PERIPH, spi->freq);
/* Clear stale status here */
reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \
diff --git a/include/fdtdec.h b/include/fdtdec.h
index f77d195..5b67a77 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -70,6 +70,7 @@
COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */
COMPAT_NVIDIA_TEGRA20_PWM, /* Tegra 2 PWM controller */
COMPAT_NVIDIA_TEGRA20_DC, /* Tegra 2 Display controller */
+ COMPAT_NVIDIA_TEGRA20_SFLASH, /* Tegra 2 SPI flash controller */
COMPAT_SMSC_LAN9215, /* SMSC 10/100 Ethernet LAN9215 */
COMPAT_SAMSUNG_EXYNOS5_SROMC, /* Exynos5 SROMC */
COMPAT_SAMSUNG_S3C2440_I2C, /* Exynos I2C Controller */
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 16921e1..385e0e5 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -45,6 +45,7 @@
COMPAT(NVIDIA_TEGRA20_NAND, "nvidia,tegra20-nand"),
COMPAT(NVIDIA_TEGRA20_PWM, "nvidia,tegra20-pwm"),
COMPAT(NVIDIA_TEGRA20_DC, "nvidia,tegra20-dc"),
+ COMPAT(NVIDIA_TEGRA20_SFLASH, "nvidia,tegra20-sflash"),
COMPAT(SMSC_LAN9215, "smsc,lan9215"),
COMPAT(SAMSUNG_EXYNOS5_SROMC, "samsung,exynos-sromc"),
COMPAT(SAMSUNG_S3C2440_I2C, "samsung,s3c2440-i2c"),