omap5: Copy device tree from linux 5.7.y
Copy all the device tree files required for omap5 uevm support from
mainline Linux.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
diff --git a/arch/arm/dts/omap5.dtsi b/arch/arm/dts/omap5.dtsi
new file mode 100644
index 0000000..2ac7f02
--- /dev/null
+++ b/arch/arm/dts/omap5.dtsi
@@ -0,0 +1,583 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Based on "omap4.dtsi"
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
+#include <dt-bindings/clock/omap5.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ compatible = "ti,omap5";
+ interrupt-parent = <&wakeupgen>;
+ chosen { };
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ i2c4 = &i2c5;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x0>;
+
+ operating-points = <
+ /* kHz uV */
+ 1000000 1060000
+ 1500000 1250000
+ >;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x1>;
+
+ operating-points = <
+ /* kHz uV */
+ 1000000 1060000
+ 1500000 1250000
+ >;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ };
+
+ thermal-zones {
+ #include "omap4-cpu-thermal.dtsi"
+ #include "omap5-gpu-thermal.dtsi"
+ #include "omap5-core-thermal.dtsi"
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ /* PPI secure/nonsecure IRQ */
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gic: interrupt-controller@48211000 {
+ compatible = "arm,cortex-a15-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0 0x48211000 0 0x1000>,
+ <0 0x48212000 0 0x2000>,
+ <0 0x48214000 0 0x2000>,
+ <0 0x48216000 0 0x2000>;
+ interrupt-parent = <&gic>;
+ };
+
+ wakeupgen: interrupt-controller@48281000 {
+ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0 0x48281000 0 0x1000>;
+ interrupt-parent = <&gic>;
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is used for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap4-mpu";
+ ti,hwmods = "mpu";
+ sram = <&ocmcram>;
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP3 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ * Since it will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "ti,omap5-l3-noc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xc0000000>;
+ dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
+ ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+ reg = <0 0x44000000 0 0x2000>,
+ <0 0x44800000 0 0x3000>,
+ <0 0x45000000 0 0x4000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ l4_wkup: interconnect@4ae00000 {
+ };
+
+ l4_cfg: interconnect@4a000000 {
+ };
+
+ l4_per: interconnect@48000000 {
+ };
+
+ l4_abe: interconnect@40100000 {
+ };
+
+ ocmcram: sram@40300000 {
+ compatible = "mmio-sram";
+ reg = <0x40300000 0x20000>; /* 128k */
+ };
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,omap4430-gpmc";
+ reg = <0x50000000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 4>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ ti,hwmods = "gpmc";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x55082000 0x100>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu_ipu: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
+ };
+
+ dmm@4e000000 {
+ compatible = "ti,omap5-dmm";
+ reg = <0x4e000000 0x800>;
+ interrupts = <0 113 0x4>;
+ ti,hwmods = "dmm";
+ };
+
+ emif1: emif@4c000000 {
+ compatible = "ti,emif-4d5";
+ ti,hwmods = "emif1";
+ ti,no-idle-on-init;
+ phy-type = <2>; /* DDR PHY type: Intelli PHY */
+ reg = <0x4c000000 0x400>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+
+ emif2: emif@4d000000 {
+ compatible = "ti,emif-4d5";
+ ti,hwmods = "emif2";
+ ti,no-idle-on-init;
+ phy-type = <2>; /* DDR PHY type: Intelli PHY */
+ reg = <0x4d000000 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+
+ bandgap: bandgap@4a0021e0 {
+ reg = <0x4a0021e0 0xc
+ 0x4a00232c 0xc
+ 0x4a002380 0x2c
+ 0x4a0023C0 0x3c>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ compatible = "ti,omap5430-bandgap";
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ /* OCP2SCP3 */
+ sata: sata@4a141100 {
+ compatible = "snps,dwc-ahci";
+ reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
+ ti,hwmods = "sata";
+ ports-implemented = <0x1>;
+ };
+
+ target-module@56000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5600fe00 0x4>,
+ <0x5600fe10 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x56000000 0x2000000>;
+
+ /*
+ * Closed source PowerVR driver, no child device
+ * binding or driver in mainline
+ */
+ };
+
+ target-module@58000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x58000000 4>,
+ <0x58000014 4>;
+ reg-names = "rev", "syss";
+ ti,syss-mask = <1>;
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 0>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>;
+ clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x58000000 0x1000000>;
+
+ dss: dss@0 {
+ compatible = "ti,omap5-dss";
+ reg = <0 0x80>;
+ status = "disabled";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1000000>;
+
+ target-module@1000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x1000 0x4>,
+ <0x1010 0x4>,
+ <0x1014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1000 0x1000>;
+
+ dispc@0 {
+ compatible = "ti,omap5-dispc";
+ reg = <0 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ };
+ };
+
+ target-module@2000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x2000 0x4>,
+ <0x2010 0x4>,
+ <0x2014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x1000>;
+
+ rfbi: encoder@0 {
+ compatible = "ti,omap5-rfbi";
+ reg = <0 0x100>;
+ status = "disabled";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>;
+ clock-names = "fck", "ick";
+ };
+ };
+
+ target-module@5000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x5000 0x4>,
+ <0x5010 0x4>,
+ <0x5014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5000 0x1000>;
+
+ dsi1: encoder@0 {
+ compatible = "ti,omap5-dsi";
+ reg = <0 0x200>,
+ <0x200 0x40>,
+ <0x300 0x40>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ };
+ };
+
+ target-module@9000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x9000 0x4>,
+ <0x9010 0x4>,
+ <0x9014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x9000 0x1000>;
+
+ dsi2: encoder@0 {
+ compatible = "ti,omap5-dsi";
+ reg = <0 0x200>,
+ <0x200 0x40>,
+ <0x300 0x40>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ };
+ };
+
+ target-module@40000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x40000 0x4>,
+ <0x40010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck", "dss_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x40000 0x40000>;
+
+ hdmi: encoder@0 {
+ compatible = "ti,omap5-hdmi";
+ reg = <0 0x200>,
+ <0x200 0x80>,
+ <0x300 0x80>,
+ <0x20000 0x19000>;
+ reg-names = "wp", "pll", "phy", "core";
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
+ dmas = <&sdma 76>;
+ dma-names = "audio_tx";
+ };
+ };
+ };
+ };
+
+ abb_mpu: regulator-abb-mpu {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_mpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
+ <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address", "ldo-address";
+ ti,tranxdone-status-mask = <0x80>;
+ /* LDOVBBMPU_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMPU_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1060000 0 0x0 0 0x02000000 0x01F00000
+ 1250000 0 0x4 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_mm: regulator-abb-mm {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_mm";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
+ <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address", "ldo-address";
+ ti,tranxdone-status-mask = <0x80000000>;
+ /* LDOVBBMM_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMM_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1025000 0 0x0 0 0x02000000 0x01F00000
+ 1120000 0 0x4 0 0x02000000 0x01F00000
+ >;
+ };
+ };
+};
+
+&cpu_thermal {
+ polling-delay = <500>; /* milliseconds */
+ coefficients = <65 (-1791)>;
+};
+
+#include "omap5-l4.dtsi"
+#include "omap54xx-clocks.dtsi"
+
+&gpu_thermal {
+ coefficients = <117 (-2992)>;
+};
+
+&core_thermal {
+ coefficients = <0 2000>;
+};
+
+#include "omap5-l4-abe.dtsi"
+#include "omap54xx-clocks.dtsi"
+
+&prm {
+ prm_dsp: prm@400 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x400 0x100>;
+ #reset-cells = <1>;
+ };
+
+ prm_core: prm@700 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x700 0x100>;
+ #reset-cells = <1>;
+ };
+
+ prm_iva: prm@1200 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1200 0x100>;
+ #reset-cells = <1>;
+ };
+
+ prm_device: prm@1c00 {
+ compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1c00 0x100>;
+ #reset-cells = <1>;
+ };
+};