net/phy: set led for rtl8211f phy
Initialize LCR rigister to configure
green LED for Link, yellow LED for Active.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 79452a8..bba48da 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -41,6 +41,7 @@
#define MIIM_RTL8211F_PAGE_SELECT 0x1f
#define MIIM_RTL8211F_TX_DELAY 0x100
+#define MIIM_RTL8211F_LCR 0x10
/* RealTek RTL8211x */
static int rtl8211x_config(struct phy_device *phydev)
@@ -79,6 +80,13 @@
MIIM_RTL8211F_PAGE_SELECT, 0x0);
}
+ /* Set green LED for Link, yellow LED for Active */
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MIIM_RTL8211F_PAGE_SELECT, 0xd04);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x10, 0x617f);
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MIIM_RTL8211F_PAGE_SELECT, 0x0);
+
genphy_config_aneg(phydev);
return 0;