phylib: Add a bunch of PHY drivers from tsec
The tsec driver had a bunch of PHY drivers already written. This
converts them all into PHY Lib drivers, and serves as the first
set of PHY drivers for PHY Lib.
While doing that, cleaned up a number of magic numbers (though
not all of them, as PHY vendors like to keep their numbers as
magical as possible). Also, noticed that almost all of the
vitesse/cicada PHYs had the same config/parse/startup functions,
so those have been collapsed into one.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
new file mode 100644
index 0000000..d48d4fe
--- /dev/null
+++ b/drivers/net/phy/vitesse.c
@@ -0,0 +1,242 @@
+/*
+ * Vitesse PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <miiphy.h>
+
+/* Cicada Auxiliary Control/Status Register */
+#define MIIM_CIS82xx_AUX_CONSTAT 0x1c
+#define MIIM_CIS82xx_AUXCONSTAT_INIT 0x0004
+#define MIIM_CIS82xx_AUXCONSTAT_DUPLEX 0x0020
+#define MIIM_CIS82xx_AUXCONSTAT_SPEED 0x0018
+#define MIIM_CIS82xx_AUXCONSTAT_GBIT 0x0010
+#define MIIM_CIS82xx_AUXCONSTAT_100 0x0008
+
+/* Cicada Extended Control Register 1 */
+#define MIIM_CIS82xx_EXT_CON1 0x17
+#define MIIM_CIS8201_EXTCON1_INIT 0x0000
+
+/* Cicada 8204 Extended PHY Control Register 1 */
+#define MIIM_CIS8204_EPHY_CON 0x17
+#define MIIM_CIS8204_EPHYCON_INIT 0x0006
+#define MIIM_CIS8204_EPHYCON_RGMII 0x1100
+
+/* Cicada 8204 Serial LED Control Register */
+#define MIIM_CIS8204_SLED_CON 0x1b
+#define MIIM_CIS8204_SLEDCON_INIT 0x1115
+
+/* Vitesse VSC8601 Extended PHY Control Register 1 */
+#define MIIM_VSC8601_EPHY_CON 0x17
+#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120
+#define MIIM_VSC8601_SKEW_CTRL 0x1c
+
+#define PHY_EXT_PAGE_ACCESS 0x1f
+
+/* CIS8201 */
+static int vitesse_config(struct phy_device *phydev)
+{
+ /* Override PHY config settings */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
+ MIIM_CIS82xx_AUXCONSTAT_INIT);
+ /* Set up the interface mode */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_EXT_CON1,
+ MIIM_CIS8201_EXTCON1_INIT);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int vitesse_parse_status(struct phy_device *phydev)
+{
+ int speed;
+ int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT);
+
+ if (mii_reg & MIIM_CIS82xx_AUXCONSTAT_DUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ speed = mii_reg & MIIM_CIS82xx_AUXCONSTAT_SPEED;
+ switch (speed) {
+ case MIIM_CIS82xx_AUXCONSTAT_GBIT:
+ phydev->speed = SPEED_1000;
+ break;
+ case MIIM_CIS82xx_AUXCONSTAT_100:
+ phydev->speed = SPEED_100;
+ break;
+ default:
+ phydev->speed = SPEED_10;
+ break;
+ }
+
+ return 0;
+}
+
+static int vitesse_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ vitesse_parse_status(phydev);
+
+ return 0;
+}
+
+static int cis8204_config(struct phy_device *phydev)
+{
+ /* Override PHY config settings */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
+ MIIM_CIS82xx_AUXCONSTAT_INIT);
+
+ genphy_config_aneg(phydev);
+
+ if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID))
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
+ MIIM_CIS8204_EPHYCON_INIT |
+ MIIM_CIS8204_EPHYCON_RGMII);
+ else
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
+ MIIM_CIS8204_EPHYCON_INIT);
+
+ return 0;
+}
+
+/* Vitesse VSC8601 */
+int vsc8601_config(struct phy_device *phydev)
+{
+ /* Configure some basic stuff */
+#ifdef CONFIG_SYS_VSC8601_SKEWFIX
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_EPHY_CON,
+ MIIM_VSC8601_EPHY_CON_INIT_SKEW);
+#if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX)
+ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 1);
+#define VSC8101_SKEW \
+ ((CONFIG_SYS_VSC8601_SKEW_TX << 14) \
+ | (CONFIG_SYS_VSC8601_SKEW_RX << 12))
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_SKEW_CTRL,
+ VSC8101_SKEW);
+ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
+#endif
+#endif
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static struct phy_driver VSC8211_driver = {
+ .name = "Vitesse VSC8211",
+ .uid = 0xfc4b0,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &vitesse_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8221_driver = {
+ .name = "Vitesse VSC8221",
+ .uid = 0xfc550,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8244_driver = {
+ .name = "Vitesse VSC8244",
+ .uid = 0xfc6c0,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8234_driver = {
+ .name = "Vitesse VSC8234",
+ .uid = 0xfc620,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8601_driver = {
+ .name = "Vitesse VSC8601",
+ .uid = 0x70420,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &vsc8601_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8641_driver = {
+ .name = "Vitesse VSC8641",
+ .uid = 0x70430,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+/* Vitesse bought Cicada, so we'll put these here */
+static struct phy_driver cis8201_driver = {
+ .name = "CIS8201",
+ .uid = 0xfc410,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &vitesse_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver cis8204_driver = {
+ .name = "Cicada Cis8204",
+ .uid = 0xfc440,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &cis8204_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int phy_vitesse_init(void)
+{
+ phy_register(&VSC8641_driver);
+ phy_register(&VSC8601_driver);
+ phy_register(&VSC8234_driver);
+ phy_register(&VSC8244_driver);
+ phy_register(&VSC8211_driver);
+ phy_register(&VSC8221_driver);
+ phy_register(&cis8201_driver);
+ phy_register(&cis8204_driver);
+
+ return 0;
+}