ftwdt010_wdt: support faraday ftwdt010 watchdog
Faraday ftwdt010 watchdog is an architecture independant
watchdog. It is usually used in SoC chip design.
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 6ab4d52..5579bf2 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -26,6 +26,7 @@
LIB := $(obj)libwatchdog.o
COBJS-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
+COBJS-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/watchdog/ftwdt010_wdt.c b/drivers/watchdog/ftwdt010_wdt.c
new file mode 100644
index 0000000..6e0617b
--- /dev/null
+++ b/drivers/watchdog/ftwdt010_wdt.c
@@ -0,0 +1,102 @@
+/*
+ * Watchdog driver for the FTWDT010 Watch Dog Driver
+ *
+ * (c) Copyright 2004 Faraday Technology Corp. (www.faraday-tech.com)
+ * Based on sa1100_wdt.c by Oleg Drokin <green@crimea.edu>
+ * Based on SoftDog driver by Alan Cox <alan@redhat.com>
+ *
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * 27/11/2004 Initial release, Faraday.
+ * 12/01/2011 Port to u-boot, Macpaul Lin.
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <asm/io.h>
+#include "ftwdt010_wdt.h"
+
+/*
+ * Set the watchdog time interval.
+ * Counter is 32 bit.
+ */
+static int ftwdt010_wdt_settimeout(unsigned int timeout)
+{
+ unsigned int reg;
+
+ struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE;
+
+ debug("Activating WDT..\n");
+
+ /* Check if disabled */
+ if (readl(&wd->wdcr) & ~FTWDT010_WDCR_ENABLE) {
+ printf("sorry, watchdog is disabled\n");
+ return -1;
+ }
+
+ /*
+ * In a 66MHz system,
+ * if you set WDLOAD as 0x03EF1480 (66000000)
+ * the reset timer is 1 second.
+ */
+ reg = FTWDT010_WDLOAD(timeout * FTWDT010_TIMEOUT_FACTOR);
+
+ writel(reg, &wd->wdload);
+
+ return 0;
+}
+
+void ftwdt010_wdt_reset()
+{
+ struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE;
+
+ /* clear control register */
+ writel(0, &wd->wdcr);
+
+ /* Write Magic number */
+ writel(FTWDT010_WDRESTART_MAGIC, &wd->wdrestart);
+
+ /* Enable WDT */
+ writel((FTWDT010_WDCR_RST | FTWDT010_WDCR_ENABLE), &wd->wdcr);
+}
+
+void ftwdt010_wdt_disable()
+{
+ struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE;
+
+ debug("Deactivating WDT..\n");
+
+ /*
+ * It was defined with CONFIG_WATCHDOG_NOWAYOUT in Linux
+ *
+ * Shut off the timer.
+ * Lock it in if it's a module and we defined ...NOWAYOUT
+ */
+ writel(0, &wd->wdcr);
+}
+
+void hw_watchdog_reset()
+{
+ ftwdt010_wdt_reset();
+}
+
+void hw_watchdog_init(void)
+{
+ /* set timer in ms */
+ ftwdt010_wdt_settimeout(CONFIG_FTWDT010_HW_TIMEOUT * 1000);
+}
diff --git a/drivers/watchdog/ftwdt010_wdt.h b/drivers/watchdog/ftwdt010_wdt.h
new file mode 100644
index 0000000..8f4fd68
--- /dev/null
+++ b/drivers/watchdog/ftwdt010_wdt.h
@@ -0,0 +1,103 @@
+/*
+ * Watchdog driver for the FTWDT010 Watch Dog Driver
+ *
+ * (c) Copyright 2004 Faraday Technology Corp. (www.faraday-tech.com)
+ * Based on sa1100_wdt.c by Oleg Drokin <green@crimea.edu>
+ * Based on SoftDog driver by Alan Cox <alan@redhat.com>
+ *
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * 27/11/2004 Initial release, Faraday.
+ * 12/01/2011 Port to u-boot, Macpaul Lin.
+ */
+
+#ifndef __FTWDT010_H
+#define __FTWDT010_H
+
+struct ftwdt010_wdt {
+ unsigned int wdcounter; /* Counter Reg - 0x00 */
+ unsigned int wdload; /* Counter Auto Reload Reg - 0x04 */
+ unsigned int wdrestart; /* Counter Restart Reg - 0x08 */
+ unsigned int wdcr; /* Control Reg - 0x0c */
+ unsigned int wdstatus; /* Status Reg - 0x10 */
+ unsigned int wdclear; /* Timer Clear - 0x14 */
+ unsigned int wdintrlen; /* Interrupt Length - 0x18 */
+};
+
+/*
+ * WDLOAD - Counter Auto Reload Register
+ * The Auto Reload Register is set to 0x03EF1480 (66Mhz) by default.
+ * Which means in a 66MHz system, the period of Watch Dog timer reset is
+ * one second.
+ */
+#define FTWDT010_WDLOAD(x) ((x) & 0xffffffff)
+
+/*
+ * WDRESTART - Watch Dog Timer Counter Restart Register
+ * If writing 0x5AB9 to WDRESTART register, Watch Dog timer will
+ * automatically reload WDLOAD to WDCOUNTER and restart counting.
+ */
+#define FTWDT010_WDRESTART_MAGIC 0x5AB9
+
+/* WDCR - Watch Dog Timer Control Register */
+#define FTWDT010_WDCR_ENABLE (1 << 0)
+#define FTWDT010_WDCR_RST (1 << 1)
+#define FTWDT010_WDCR_INTR (1 << 2)
+/* FTWDT010_WDCR_EXT bit: Watch Dog Timer External Signal Enable */
+#define FTWDT010_WDCR_EXT (1 << 3)
+/* FTWDT010_WDCR_CLOCK bit: Clock Source: 0: PCLK, 1: EXTCLK.
+ * The clock source PCLK cannot be gated when system sleeps, even if
+ * WDCLOCK bit is turned on.
+ *
+ * Faraday's Watch Dog timer can be driven by an external clock. The
+ * programmer just needs to write one to WdCR[WdClock] bit.
+ *
+ * Note: There is a limitation between EXTCLK and PCLK:
+ * EXTCLK cycle time / PCLK cycle time > 2.
+ * If the system does not need an external clock,
+ * just keep WdCR[WdClock] bit in its default value.
+ */
+#define FTWDT010_WDCR_CLOCK (1 << 4)
+
+/*
+ * WDSTATUS - Watch Dog Timer Status Register
+ * This bit is set when the counter reaches Zero
+ */
+#define FTWDT010_WDSTATUS(x) ((x) & 0x1)
+
+/*
+ * WDCLEAR - Watch Dog Timer Clear Register
+ * Writing one to this register will clear WDSTATUS.
+ */
+#define FTWDT010_WDCLEAR (1 << 0)
+
+/*
+ * WDINTRLEN - Watch Dog Timer Interrupt Length
+ * This register controls the duration length of wd_rst, wd_intr and wd_ext.
+ * The default value is 0xFF.
+ */
+#define FTWDT010_WDINTRLEN(x) ((x) & 0xff)
+
+/*
+ * Variable timeout should be set in ms.
+ * (CONFIG_SYS_CLK_FREQ/1000) equals 1 ms.
+ * WDLOAD = timeout * TIMEOUT_FACTOR.
+ */
+#define FTWDT010_TIMEOUT_FACTOR (CONFIG_SYS_CLK_FREQ / 1000) /* 1 ms */
+
+#endif /* __FTWDT010_H */