pmic: pca9450: Make warm reset on WDOG_B assertion
The default configuration of the PMIC behavior makes the PMIC
power cycle most regulators on WDOG_B assertion. This power
cycling causes the memory contents of OCRAM to be lost.
Some systems neeeds some memory that survives reset and
reboot, therefore this patch is created.
The implementation is taken almost verbatim from Linux commit
2364a64d0673f ("regulator: pca9450: Make warm reset on WDOG_B assertion")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
diff --git a/drivers/power/pmic/pca9450.c b/drivers/power/pmic/pca9450.c
index a186edc..2427abf 100644
--- a/drivers/power/pmic/pca9450.c
+++ b/drivers/power/pmic/pca9450.c
@@ -86,6 +86,7 @@
static int pca9450_probe(struct udevice *dev)
{
struct pca9450_priv *priv = dev_get_priv(dev);
+ unsigned int reset_ctrl;
int ret = 0;
if (CONFIG_IS_ENABLED(DM_GPIO) && CONFIG_IS_ENABLED(DM_REGULATOR_PCA9450)) {
@@ -95,10 +96,18 @@
if (IS_ERR(priv->sd_vsel_gpio)) {
ret = PTR_ERR(priv->sd_vsel_gpio);
dev_err(dev, "Failed to request SD_VSEL GPIO: %d\n", ret);
+ if (ret)
+ return ret;
}
}
- return ret;
+ if (ofnode_read_bool(dev_ofnode(dev), "nxp,wdog_b-warm-reset"))
+ reset_ctrl = PCA9450_PMIC_RESET_WDOG_B_CFG_WARM;
+ else
+ reset_ctrl = PCA9450_PMIC_RESET_WDOG_B_CFG_COLD_LDO12;
+
+ return pmic_clrsetbits(dev, PCA9450_RESET_CTRL,
+ PCA9450_PMIC_RESET_WDOG_B_CFG_MASK, reset_ctrl);
}
static struct dm_pmic_ops pca9450_ops = {
diff --git a/include/power/pca9450.h b/include/power/pca9450.h
index fa0405fc..6efecee 100644
--- a/include/power/pca9450.h
+++ b/include/power/pca9450.h
@@ -67,4 +67,8 @@
#define PCA9450_LDO34_MASK 0x1f
#define PCA9450_LDO5_MASK 0x0f
+#define PCA9450_PMIC_RESET_WDOG_B_CFG_MASK 0xc0
+#define PCA9450_PMIC_RESET_WDOG_B_CFG_WARM 0x40
+#define PCA9450_PMIC_RESET_WDOG_B_CFG_COLD_LDO12 0x80
+
#endif