sunxi: musb: Use device-model for musb host mode
Modify the sunxi musb glue to use the device-model for musb host mode.
This allows using musb in host mode together with other host drivers
such as ehci / ohci, which is esp. useful on boards which use the
musb controller in host-only mode, these boards have e.g. an usb-a
receptacle or an usb to sata converter attached to the musb controller.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index cbd2954..6109011 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -26,9 +26,12 @@
#include <asm/arch/gpio.h>
#include <asm/arch/usb_phy.h>
#include <asm-generic/gpio.h>
+#include <dm/lists.h>
+#include <dm/root.h>
#include <linux/usb/musb.h>
#include "linux-compat.h"
#include "musb_core.h"
+#include "musb_uboot.h"
/******************************************************************************
******************************************************************************
@@ -293,7 +296,61 @@
.platform_ops = &sunxi_musb_ops,
};
+#ifdef CONFIG_MUSB_HOST
+int musb_usb_probe(struct udevice *dev)
+{
+ struct musb_host_data *host = dev_get_priv(dev);
+ struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
+
+ priv->desc_before_addr = true;
+
+ if (!host->host) {
+ host->host = musb_init_controller(&musb_plat, NULL,
+ (void *)SUNXI_USB0_BASE);
+ if (!host->host) {
+ printf("Failed to init the controller\n");
+ return -EIO;
+ }
+ }
+
+ printf("MUSB OTG in host-mode\n");
+
+ return musb_lowlevel_init(host);
+}
+
+int musb_usb_remove(struct udevice *dev)
+{
+ struct musb_host_data *host = dev_get_priv(dev);
+
+ musb_stop(host->host);
+
+ return 0;
+}
+
+U_BOOT_DRIVER(usb_musb) = {
+ .name = "sunxi-musb",
+ .id = UCLASS_USB,
+ .probe = musb_usb_probe,
+ .remove = musb_usb_remove,
+ .ops = &musb_usb_ops,
+ .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+ .priv_auto_alloc_size = sizeof(struct musb_host_data),
+};
+#endif
+
void sunxi_musb_board_init(void)
{
+#ifdef CONFIG_MUSB_HOST
+ struct udevice *dev;
+
+ /*
+ * Bind the driver directly for now as musb linux kernel support is
+ * still pending upstream so our dts files do not have the necessary
+ * nodes yet. TODO: Remove this as soon as the dts nodes are in place
+ * and bind by compatible instead.
+ */
+ device_bind_driver(dm_root(), "sunxi-musb", "sunxi-musb", &dev);
+#else
musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
+#endif
}