ARM: hisilicon: hikey: Add hikey & hi6220 dts from v4.6-rc3.
Import the upstream kernel dts into U-Boot. Currently
only serial is supported, but a lot more DT changes are
queued for v4.7.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/dts/hi6220-hikey.dts b/arch/arm/dts/hi6220-hikey.dts
new file mode 100644
index 0000000..8185251
--- /dev/null
+++ b/arch/arm/dts/hi6220-hikey.dts
@@ -0,0 +1,41 @@
+/*
+ * dts file for Hisilicon HiKey Development Board
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+
+/*Reserved 1MB memory for MCU*/
+/memreserve/ 0x05e00000 0x00100000;
+
+#include "hi6220.dtsi"
+
+/ {
+ model = "HiKey Development Board";
+ compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+
+ aliases {
+ serial0 = &uart0; /* On board UART0 */
+ serial1 = &uart1; /* BT UART */
+ serial2 = &uart2; /* LS Expansion UART0 */
+ serial3 = &uart3; /* LS Expansion UART1 */
+ };
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+};
+
+&uart2 {
+ label = "LS-UART0";
+};
+&uart3 {
+ label = "LS-UART1";
+};
diff --git a/arch/arm/dts/hi6220.dtsi b/arch/arm/dts/hi6220.dtsi
new file mode 100644
index 0000000..ad1f1eb
--- /dev/null
+++ b/arch/arm/dts/hi6220.dtsi
@@ -0,0 +1,213 @@
+/*
+ * dts file for Hisilicon Hi6220 SoC
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi6220-clock.h>
+
+/ {
+ compatible = "hisilicon,hi6220";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@f6801000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xf6801000 0 0x1000>, /* GICD */
+ <0x0 0xf6802000 0 0x2000>, /* GICC */
+ <0x0 0xf6804000 0 0x2000>, /* GICH */
+ <0x0 0xf6806000 0 0x2000>; /* GICV */
+ #address-cells = <0>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ao_ctrl: ao_ctrl@f7800000 {
+ compatible = "hisilicon,hi6220-aoctrl", "syscon";
+ reg = <0x0 0xf7800000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ sys_ctrl: sys_ctrl@f7030000 {
+ compatible = "hisilicon,hi6220-sysctrl", "syscon";
+ reg = <0x0 0xf7030000 0x0 0x2000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ media_ctrl: media_ctrl@f4410000 {
+ compatible = "hisilicon,hi6220-mediactrl", "syscon";
+ reg = <0x0 0xf4410000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pm_ctrl: pm_ctrl@f7032000 {
+ compatible = "hisilicon,hi6220-pmctrl", "syscon";
+ reg = <0x0 0xf7032000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: uart@f8015000 { /* console */
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf8015000 0x0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ao_ctrl HI6220_UART0_PCLK>,
+ <&ao_ctrl HI6220_UART0_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ uart1: uart@f7111000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7111000 0x0 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART1_PCLK>,
+ <&sys_ctrl HI6220_UART1_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: uart@f7112000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7112000 0x0 0x1000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART2_PCLK>,
+ <&sys_ctrl HI6220_UART2_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart3: uart@f7113000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7113000 0x0 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART3_PCLK>,
+ <&sys_ctrl HI6220_UART3_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ uart4: uart@f7114000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7114000 0x0 0x1000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART4_PCLK>,
+ <&sys_ctrl HI6220_UART4_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};