ARM: dts: Import libretech-ac DT from Linux 5.0
Import Linux 5.0 DT from 1c163f4c7b3f ("Linux 5.0") for the
meson-gxl-s805x-libretech-ac board and the corresponding changes
in meson-gxl.dtsi.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index b9eb2c0..36b969d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -100,6 +100,7 @@
meson-gxbb-p200.dtb \
meson-gxbb-p201.dtb \
meson-gxl-s905x-p212.dtb \
+ meson-gxl-s805x-libretech-ac.dtb \
meson-gxl-s905x-libretech-cc.dtb \
meson-gxl-s905x-khadas-vim.dtb \
meson-gxm-khadas-vim2.dtb \
diff --git a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts b/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
new file mode 100644
index 0000000..82b1c48
--- /dev/null
+++ b/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+ compatible = "libretech,aml-s805x-ac", "amlogic,s805x",
+ "amlogic,meson-gxl";
+ model = "Libre Computer Board AML-S805X-AC";
+
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = ðmac;
+ spi0 = &spifc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cvbs-connector {
+ /*
+ * The pads are present but no connector is soldered on
+ * 2J2, so keep this off by default.
+ */
+ status = "disabled";
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ dc_5v: regulator-dc_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x20000000>;
+ };
+
+ vcck: regulator-vcck {
+ compatible = "regulator-fixed";
+ regulator-name = "VCCK";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_5v>;
+
+ /*
+ * This is controlled by GPIOAO_9 we reserve this but
+ * claiming it as done below reset the board anyway
+ * Need to investigate this
+ *
+ * gpio = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+ * enable-active-high;
+ */
+ regulator-always-on;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_5v>;
+ regulator-always-on;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+};
+
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+ðmac {
+ status = "okay";
+};
+
+&internal_phy {
+ pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
+ pinctrl-names = "default";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&gpio_ao {
+ gpio-line-names = "UART TX",
+ "UART RX",
+ "7J1 Header Pin31",
+ "", "", "", "",
+ "IR In",
+ "HDMI CEC",
+ "5V VCCK Regulator",
+ /* GPIO_TEST_N */
+ "";
+};
+
+&gpio {
+ gpio-line-names = /* Bank GPIOZ */
+ "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "",
+ "Eth Link LED", "Eth Activity LED",
+ /* Bank GPIOH */
+ "HDMI HPD", "HDMI SDA", "HDMI SCL",
+ "", "7J1 Header Pin13",
+ "7J1 Header Pin15",
+ "7J1 Header Pin7",
+ "7J1 Header Pin12",
+ "7J1 Header Pin16",
+ "7J1 Header Pin18",
+ /* Bank BOOT */
+ "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+ "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+ "eMMC Clk", "eMMC Reset", "eMMC CMD",
+ "SPI NOR MOSI", "SPI NOR MISO", "SPI NOR Clk",
+ "", "SPI NOR Chip Select",
+ /* Bank CARD */
+ "", "", "", "", "", "", "",
+ /* Bank GPIODV */
+ "", "", "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "", "", "",
+ "7J1 Header Pin27", "7J1 Header Pin28", "",
+ "7J1 Header Pin29",
+ "VCCK Regulator", "VDDEE Regulator",
+ /* Bank GPIOX */
+ "7J1 Header Pin22", "7J1 Header Pin26",
+ "7J1 Header Pin36", "7J1 Header Pin38",
+ "7J1 Header Pin40", "7J1 Header Pin37",
+ "7J1 Header Pin33", "7J1 Header Pin35",
+ "7J1 Header Pin19", "7J1 Header Pin21",
+ "7J1 Header Pin24", "7J1 Header Pin23",
+ "7J1 Header Pin8", "7J1 Header Pin10",
+ "", "", "7J1 Header Pin32", "", "",
+ /* Bank GPIOCLK */
+ "", "";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&spifc {
+ status = "okay";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+
+ w25q32: spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <3000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb0 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/meson-gxl.dtsi b/arch/arm/dts/meson-gxl.dtsi
index 8f0bb3c..d5c3d78 100644
--- a/arch/arm/dts/meson-gxl.dtsi
+++ b/arch/arm/dts/meson-gxl.dtsi
@@ -75,6 +75,10 @@
};
};
+&efuse {
+ clocks = <&clkc CLKID_EFUSE>;
+};
+
ðmac {
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
@@ -112,6 +116,7 @@
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
+ bias-disable;
};
};
@@ -120,6 +125,7 @@
groups = "uart_cts_ao_a",
"uart_rts_ao_a";
function = "uart_ao";
+ bias-disable;
};
};
@@ -127,6 +133,7 @@
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
+ bias-disable;
};
};
@@ -134,6 +141,7 @@
mux {
groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
function = "uart_ao_b";
+ bias-disable;
};
};
@@ -142,6 +150,7 @@
groups = "uart_cts_ao_b",
"uart_rts_ao_b";
function = "uart_ao_b";
+ bias-disable;
};
};
@@ -149,6 +158,7 @@
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
+ bias-disable;
};
};
@@ -157,6 +167,7 @@
groups = "i2c_sck_ao",
"i2c_sda_ao";
function = "i2c_ao";
+ bias-disable;
};
};
@@ -164,6 +175,7 @@
mux {
groups = "pwm_ao_a_3";
function = "pwm_ao_a";
+ bias-disable;
};
};
@@ -171,6 +183,7 @@
mux {
groups = "pwm_ao_a_8";
function = "pwm_ao_a";
+ bias-disable;
};
};
@@ -178,6 +191,7 @@
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
+ bias-disable;
};
};
@@ -185,6 +199,7 @@
mux {
groups = "pwm_ao_b_6";
function = "pwm_ao_b";
+ bias-disable;
};
};
@@ -192,6 +207,7 @@
mux {
groups = "i2s_out_ch23_ao";
function = "i2s_out_ao";
+ bias-disable;
};
};
@@ -199,6 +215,7 @@
mux {
groups = "i2s_out_ch45_ao";
function = "i2s_out_ao";
+ bias-disable;
};
};
@@ -206,6 +223,7 @@
mux {
groups = "spdif_out_ao_6";
function = "spdif_out_ao";
+ bias-disable;
};
};
@@ -213,6 +231,7 @@
mux {
groups = "spdif_out_ao_9";
function = "spdif_out_ao";
+ bias-disable;
};
};
@@ -220,6 +239,7 @@
mux {
groups = "ao_cec";
function = "cec_ao";
+ bias-disable;
};
};
@@ -227,6 +247,7 @@
mux {
groups = "ee_cec";
function = "cec_ao";
+ bias-disable;
};
};
};
@@ -239,6 +260,8 @@
&clkc_AO {
compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
+ clocks = <&xtal>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "mpeg-clk";
};
&gpio_intc {
@@ -263,6 +286,8 @@
clkc: clock-controller {
compatible = "amlogic,gxl-clkc";
#clock-cells = <1>;
+ clocks = <&xtal>;
+ clock-names = "xtal";
};
};
@@ -306,6 +331,7 @@
"emmc_cmd",
"emmc_clk";
function = "emmc";
+ bias-disable;
};
};
@@ -313,6 +339,7 @@
mux {
groups = "emmc_ds";
function = "emmc";
+ bias-disable;
};
};
@@ -320,9 +347,6 @@
mux {
groups = "BOOT_8";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "BOOT_8";
bias-pull-down;
};
};
@@ -334,6 +358,7 @@
"nor_c",
"nor_cs";
function = "nor";
+ bias-disable;
};
};
@@ -343,6 +368,7 @@
"spi_mosi",
"spi_sclk";
function = "spi";
+ bias-disable;
};
};
@@ -350,6 +376,7 @@
mux {
groups = "spi_ss0";
function = "spi";
+ bias-disable;
};
};
@@ -362,6 +389,7 @@
"sdcard_cmd",
"sdcard_clk";
function = "sdcard";
+ bias-disable;
};
};
@@ -369,9 +397,6 @@
mux {
groups = "CARD_2";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "CARD_2";
bias-pull-down;
};
};
@@ -385,6 +410,7 @@
"sdio_cmd",
"sdio_clk";
function = "sdio";
+ bias-disable;
};
};
@@ -392,9 +418,6 @@
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "GPIOX_4";
bias-pull-down;
};
};
@@ -403,6 +426,7 @@
mux {
groups = "sdio_irq";
function = "sdio";
+ bias-disable;
};
};
@@ -411,6 +435,7 @@
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
+ bias-disable;
};
};
@@ -419,6 +444,7 @@
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
+ bias-disable;
};
};
@@ -427,6 +453,7 @@
groups = "uart_tx_b",
"uart_rx_b";
function = "uart_b";
+ bias-disable;
};
};
@@ -435,6 +462,7 @@
groups = "uart_cts_b",
"uart_rts_b";
function = "uart_b";
+ bias-disable;
};
};
@@ -443,6 +471,7 @@
groups = "uart_tx_c",
"uart_rx_c";
function = "uart_c";
+ bias-disable;
};
};
@@ -451,6 +480,7 @@
groups = "uart_cts_c",
"uart_rts_c";
function = "uart_c";
+ bias-disable;
};
};
@@ -459,6 +489,7 @@
groups = "i2c_sck_a",
"i2c_sda_a";
function = "i2c_a";
+ bias-disable;
};
};
@@ -467,6 +498,7 @@
groups = "i2c_sck_b",
"i2c_sda_b";
function = "i2c_b";
+ bias-disable;
};
};
@@ -475,6 +507,7 @@
groups = "i2c_sck_c",
"i2c_sda_c";
function = "i2c_c";
+ bias-disable;
};
};
@@ -495,6 +528,7 @@
"eth_txd2",
"eth_txd3";
function = "eth";
+ bias-disable;
};
};
@@ -502,6 +536,7 @@
mux {
groups = "eth_link_led";
function = "eth_led";
+ bias-disable;
};
};
@@ -516,6 +551,7 @@
mux {
groups = "pwm_a";
function = "pwm_a";
+ bias-disable;
};
};
@@ -523,6 +559,7 @@
mux {
groups = "pwm_b";
function = "pwm_b";
+ bias-disable;
};
};
@@ -530,6 +567,7 @@
mux {
groups = "pwm_c";
function = "pwm_c";
+ bias-disable;
};
};
@@ -537,6 +575,7 @@
mux {
groups = "pwm_d";
function = "pwm_d";
+ bias-disable;
};
};
@@ -544,6 +583,7 @@
mux {
groups = "pwm_e";
function = "pwm_e";
+ bias-disable;
};
};
@@ -551,6 +591,7 @@
mux {
groups = "pwm_f_clk";
function = "pwm_f";
+ bias-disable;
};
};
@@ -558,6 +599,7 @@
mux {
groups = "pwm_f_x";
function = "pwm_f";
+ bias-disable;
};
};
@@ -565,6 +607,7 @@
mux {
groups = "hdmi_hpd";
function = "hdmi_hpd";
+ bias-disable;
};
};
@@ -572,6 +615,7 @@
mux {
groups = "hdmi_sda", "hdmi_scl";
function = "hdmi_i2c";
+ bias-disable;
};
};
@@ -579,6 +623,7 @@
mux {
groups = "i2s_am_clk";
function = "i2s_out";
+ bias-disable;
};
};
@@ -586,6 +631,7 @@
mux {
groups = "i2s_out_ao_clk";
function = "i2s_out";
+ bias-disable;
};
};
@@ -593,6 +639,7 @@
mux {
groups = "i2s_out_lr_clk";
function = "i2s_out";
+ bias-disable;
};
};
@@ -600,12 +647,14 @@
mux {
groups = "i2s_out_ch01";
function = "i2s_out";
+ bias-disable;
};
};
i2sout_ch23_z_pins: i2sout_ch23_z {
mux {
groups = "i2sout_ch23_z";
function = "i2s_out";
+ bias-disable;
};
};
@@ -613,6 +662,7 @@
mux {
groups = "i2sout_ch45_z";
function = "i2s_out";
+ bias-disable;
};
};
@@ -620,6 +670,7 @@
mux {
groups = "i2sout_ch67_z";
function = "i2s_out";
+ bias-disable;
};
};
@@ -627,6 +678,7 @@
mux {
groups = "spdif_out_h";
function = "spdif_out";
+ bias-disable;
};
};
};