i2c: stm32: fix comment and remove unused AUTOEND bit
Comment within stm32_i2c_message_start is misleading, indicating
that AUTOEND bit is setted while it is actually cleared.
Moreover, the bit is actually never setted so there is no need
to clear it hence get rid of this bit clear and the bit macro
as well.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c
index 3a727e6..e3b4991 100644
--- a/drivers/i2c/stm32f7_i2c.c
+++ b/drivers/i2c/stm32f7_i2c.c
@@ -57,7 +57,6 @@
#define STM32_I2C_CR1_PE BIT(0)
/* STM32 I2C control 2 */
-#define STM32_I2C_CR2_AUTOEND BIT(25)
#define STM32_I2C_CR2_RELOAD BIT(24)
#define STM32_I2C_CR2_NBYTES_MASK GENMASK(23, 16)
#define STM32_I2C_CR2_NBYTES(n) ((n & 0xff) << 16)
@@ -304,9 +303,8 @@
cr2 |= STM32_I2C_CR2_SADD7(msg->addr);
}
- /* Set nb bytes to transfer and reload or autoend bits */
- cr2 &= ~(STM32_I2C_CR2_NBYTES_MASK | STM32_I2C_CR2_RELOAD |
- STM32_I2C_CR2_AUTOEND);
+ /* Set nb bytes to transfer and reload (if needed) */
+ cr2 &= ~(STM32_I2C_CR2_NBYTES_MASK | STM32_I2C_CR2_RELOAD);
if (msg->len > STM32_I2C_MAX_LEN) {
cr2 |= STM32_I2C_CR2_NBYTES(STM32_I2C_MAX_LEN);
cr2 |= STM32_I2C_CR2_RELOAD;